Estava pronto para implantar meu Load Balance através de um script que fui editando a minha realidade.
A linha é esta abaixo:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx
/ ip address
add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Clientes
add address=172.0.2.92/16 network=172.0.0.0 broadcast=172.0.255.255 interface=link_embratel
add address=172.0.1.49/16 network=172.0.0.0 broadcast=172.0.255.255 interface=link_velox
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx
/ ip firewall mangle
add chain=prerouting src-address-list=odd in-interface= Clientes action=mark-connection \ new-connection-mark=odd passthrough=yes
add chain=prerouting src-address-list=odd in-interface= Clientes action=mark-routing \ new-routing-mark=odd
add chain=prerouting src-address-list=even in-interface= Clientes action=mark-connection \ new-connection-mark=even passthrough=yes
add chain=prerouting src-address-list=even in-interface= Clientes action=mark-routing \ new-routing-mark=even
add chain=prerouting in-interface= Clientes connection-state=new nth=1,1,0 \ action=mark-connection new-connection-mark=odd passthrough=yes
add chain=prerouting in-interface= Clientes action=add-src-to-address-list \ address-list=odd address-list-timeout=1d connection-mark=odd passthrough=yes
add chain=prerouting in-interface= Clientes connection-mark=odd action=mark-routing \ new-routing-mark=odd passthrough=no
add chain=prerouting in-interface= Clientes connection-state=new nth=1,1,1 \ action=mark-connection new-connection-mark=even passthrough=yes
add chain=prerouting in-interface= Clientes action=add-src-to-address-list \ address-list=even address-list-timeout=1d connection-mark=even passthrough=yes
add chain=prerouting in-interface= Clientes connection-mark=even action=mark-routing \ new-routing-mark=even passthrough=no
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx
/ ip firewall nat
add chain=srcnat connection-mark=odd action=src-nat to-addresses=172.0.2.92 \ to-ports=0-65535
add chain=srcnat connection-mark=even action=src-nat to-addresses=172.0.1.49 \ to-ports=0-65535
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx
/ ip route
add dst-address=0.0.0.0/0 gateway=189.53.70.16 scope=255 target-scope=10 routing-mark=odd
add dst-address=0.0.0.0/0 gateway=189.53.70.16 scope=255 target-scope=10 routing-mark=even
add dst-address=0.0.0.0/0 gateway=192.168.254.254 scope=255 target-scope=10
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx
Tenho as seguintes questões:
1) Quando a linha abaixo, ocorre o erro descrito na foto 1
add chain=prerouting src-address-list=odd in-interface= Clientes action=mark-connection \ new-connection-
mark=odd passthrough=yes
OBS: me falaram que onde tem odd, é para ser add
Mas mesmo assim, deu o seguinte erro:
[admin@MikroTik] > add chain=prerouting src-address-list=add in-interface=Clientes action=mark-connection \ new-connection-mark=add passthrough=yes
bad command name add (line 1 column 1)
2) O link padrão embratel é discado (modem brigge), enquanto o velox é roteado
Na linha onde atribuo router embratel, está certo eu colocar o IP da embratel ou devo colocar o IP da placa conectada ao modem embratel? ou nem preciso incluir essas duas linhas?
add dst-address=0.0.0.0/0 gateway=189.53.70.16 scope=255 target-scope=10 routing-mark=odd
add dst-address=0.0.0.0/0 gateway=189.53.70.16 scope=255 target-scope=10 routing-mark=even
Erro no Terminal e outras questões
