Tópico: SNMP + MRTG do squid

fala galera, como tá as coisa??

pessoal, não estou conseguindo gerar o arquivo cfg do squid para gerar os gráficos do MRTG

quando executo o comando "cfgmaker --output=temp.cfg public@localhost:3401" aparece a seguinte mensagem:

# cfgmaker --output=temp.cfg public@localhost:3401
--base: Get Device Info on public@localhost:3401
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.2.1.1)
SNMPv1_Session (remote host: "localhost" [127.0.0.1].3401)
community: "public"
request ID: 812316732
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/share/perl5/SNMP_util.pm line 627
SNMPWALK Problem for 1.3.6.1.2.1.1 on public@localhost:3401:::::v4only
at /usr/bin/cfgmaker line 828
WARNING: Skipping public@localhost:3401 as no info could be retrieved

--base: Writing temp.cfg

as opções do squid para snmp estão da seguinte forma:

acl snmppublic snmp_community public
snmp_port 3401
snmp_access allow snmppublic localhost
snmp_access deny all
snmp_incoming_address 0.0.0.0
snmp_outgoing_address 0.0.0.0

o snmpd.conf está configurado assim:

# cat /etc/snmp/snmpd.conf | grep -v ^# | grep -v ^$
com2sec readonly default public
group MyROSystem v1 paranoid
group MyROSystem v2c paranoid
group MyROSystem usm paranoid
group MyROGroup v1 readonly
group MyROGroup v2c readonly
group MyROGroup usm readonly
group MyRWGroup v1 readwrite
group MyRWGroup v2c readwrite
group MyRWGroup usm readwrite
view all included .1 80
view system included .iso.org.dod.internet.mgmt.mib-2.system
access MyROSystem "" any noauth exact system none none
access MyROGroup "" any noauth exact all none none
access MyRWGroup "" any noauth exact all all none
syslocation GNU/Linux Debian Sarge 3.1r1
syscontact Luciano

alguém sabe como resolver este porém??

valeu