tenho um micro atualmente com winMe porta 6588 fazendo proxy
o mandrake tem duas placas
como faço para que
eth0 receba a conexão pela porta 6588
eth1 faça o proxy e firewall
Versão Imprimível
tenho um micro atualmente com winMe porta 6588 fazendo proxy
o mandrake tem duas placas
como faço para que
eth0 receba a conexão pela porta 6588
eth1 faça o proxy e firewall
http_port 192.168.0.251:3128
visible_hostname athlon2000
hierarchy_stoplist cgi-bin ?
acl QUERY urlpath_regex cgi-bin \?
no_cache deny QUERY
cache_mem 32 MB # memoria usada
#esvazia o cache
cache_swap_low 10
cache_swap_high 15
maximum_object_size 6144 KB
minimum_object_size 0 KB
maximum_object_size_in_memory 100 KB
ipcache_size 1024
ipcache_low 90
ipcache_high 93
acl all src 0.0.0.0/0.0.0.0
acl localhost src 127.0.0.1
acl rede src 192.168.0.1 192.168.0.2 192.168.0.3 192.168.2.254 # ips da rede
#libera acesso
http_access allow rede
http_access allow localhost
httpd_accel_host 127.0.0.1
httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
# ACL'S QUE LIBERA PORTAS
acl SSL_ports port 443 563 # https, snews
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 6588
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl Safe_ports port 901 # SWAT
[root@athlon Documents]# squid start
[root@athlon Documents]# squid -k reconfigure
squid: ERROR: No running copy
o que tem de errado??
2005/03/04 21:33:13| squid.conf line 37: http_reply_access allow all
2005/03/04 21:33:13| aclParseAccessLine: ACL name 'all' not found.
2005/03/04 21:33:13| squid.conf line 37: http_reply_access allow all
2005/03/04 21:33:13| aclParseAccessLine: Access line contains no ACL's, skipping
2005/03/04 21:33:13| squid.conf line 38: icp_access deny all
2005/03/04 21:33:13| aclParseAccessLine: ACL name 'all' not found.
2005/03/04 21:33:13| squid.conf line 38: icp_access deny all
2005/03/04 21:33:13| aclParseAccessLine: Access line contains no ACL's, skipping
2005/03/04 21:33:13| squid.conf line 39: ident_lookup_access deny all
2005/03/04 21:33:13| aclParseAccessLine: ACL name 'all' not found.
2005/03/04 21:33:13| squid.conf line 39: ident_lookup_access deny all
2005/03/04 21:33:13| aclParseAccessLine: Access line contains no ACL's, skipping
2005/03/04 21:33:13| squid.conf line 40: reply_body_max_size 0 allow all
2005/03/04 21:33:13| aclParseAccessLine: ACL name 'all' not found.
2005/03/04 21:33:13| squid.conf line 40: reply_body_max_size 0 allow all
2005/03/04 21:33:13| aclParseAccessLine: Access line contains no ACL's, skipping
2005/03/04 21:33:13| squid.conf line 42: snmp_access deny all
2005/03/04 21:33:13| aclParseAccessLine: ACL name 'all' not found.
2005/03/04 21:33:13| squid.conf line 42: snmp_access deny all
2005/03/04 21:33:13| aclParseAccessLine: Access line contains no ACL's, skipping
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'
Squid Cache (Version 2.5.STABLE3): Terminated abnormally.
CPU Usage: 0.010 seconds = 0.010 user + 0.000 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 337
Aborted
[root@athlon cache]# squid -z restart
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'
Squid Cache (Version 2.5.STABLE3): Terminated abnormally.
CPU Usage: 0.000 seconds = 0.000 user + 0.000 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 335
Aborted
[root@athlon cache]# squid -z
FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'
Squid Cache (Version 2.5.STABLE3): Terminated abnormally.
CPU Usage: 0.000 seconds = 0.000 user + 0.000 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 335
Aborted