PPPoE Client com Acesso GVT
Boa noite pessoal, gostaria de uma grande ajuda. Tenho velox aqui na Bahia há 5 anos, e essa semana coloquei um link GVT 15mb.
O problema é o seguinte: o velox autentica no meu mikrotik sem problema algum, daí coloquei o link GVT, criei outro ppoe client pra discar e tudo. No entanto, o link pinga para sites dentro do MK, mas a rede não funciona pc nenhum na internet. Eu entrei no modem GVT, coloquei ele em bridge, coloquei o mesmo dns da oi. Ele funciona quando disco do pc, mas no mikrotik não funciona de jeito algum. já tenho 3 dias tentando e estou quase cancelando o link da GVT. Será que existe algum bloqueio? Por favor me ajudem
re: PPPoE Client com Acesso GVT
Amigo voce criou o Nat para o novo pppoe??? Ele esta autenticando como default, foi criado alguma rota????
re: PPPoE Client com Acesso GVT
Citação:
Postado originalmente por
tigobala
Boa noite pessoal, gostaria de uma grande ajuda. Tenho velox aqui na Bahia há 5 anos, e essa semana coloquei um link GVT 15mb.
O problema é o seguinte: o velox autentica no meu mikrotik sem problema algum, daí coloquei o link GVT, criei outro ppoe client pra discar e tudo. No entanto, o link pinga para sites dentro do MK, mas a rede não funciona pc nenhum na internet. Eu entrei no modem GVT, coloquei ele em bridge, coloquei o mesmo dns da oi. Ele funciona quando disco do pc, mas no mikrotik não funciona de jeito algum. já tenho 3 dias tentando e estou quase cancelando o link da GVT. Será que existe algum bloqueio? Por favor me ajudem
Eu entrei no modem GVT, coloquei ele em bridge, coloquei o mesmo dns da oi.
detalhe em azul. ai não :banghead: (dica , pode por no mikrotik dns da google que é
8.8.8.8 ou 8.8.4.4 roda com todas as operadoras. uso gvt aqui faz 7 anos ,e ó filé.
sem essa de bloqueio..já tentou refazer seu hotspot ou servidor ppoe .
re: PPPoE Client com Acesso GVT
Amigo a gvt so funciona com DNS fornecido por eles, exemplo dns da oi nao funciona com link da gvt entao vc pode estar fazendo como o amigo falou colocando o dns da google ou da open dns q sao dns aberto, faz este teste e post aqui para saber se resolveu
re: PPPoE Client com Acesso GVT
Bem pessoal, fora do mikrotik eu configurei o modem com o dns 200.165.132.154 - 200.165.132.147 e efunciona normal. Dentro do MK eu tb coloquei esse dns, o mikrotik dá ping para Google e tudo.
Uma dúvida: Eu crio a NAT e masquerade, eu tenho que setar ela pra alguma interface?
re: PPPoE Client com Acesso GVT
Claro, seta a interface OUT como o pppoe-out da gvt.
Re: PPPoE Client com Acesso GVT
Por favor, me ajuda... Estou com minha rede parada aqui
Já fiz isso e nada
Re: PPPoE Client com Acesso GVT
Citação:
Postado originalmente por
tigobala
Por favor, me ajuda... Estou com minha rede parada aqui
Já fiz isso e nada
amigo tem uma apostila muito boa aqui no under que te explica tudo isto, discar a conexao, fazer o nat, adcionar as rotas, tudo que vc precisa.
confere:Mikrotik - Under-Linux.Org Wiki
Re: PPPoE Client com Acesso GVT
Amigo, eu uso Mk com link da OI a 6 anos... Faço e refaço toda hora, o problema é que com a GVT não tá funcionando.. Coloco o link da oi e em 10 segundos já tá funfando... Alguém poderia entrar no meu MK pra ver a configuração?
Re: PPPoE Client com Acesso GVT
Citação:
Postado originalmente por
tigobala
Amigo, eu uso Mk com link da OI a 6 anos... Faço e refaço toda hora, o problema é que com a GVT não tá funcionando.. Coloco o link da oi e em 10 segundos já tá funfando... Alguém poderia entrar no meu MK pra ver a configuração?
vc esta com o dois links ao mesmo tempo? me manda um MP.
Re: PPPoE Client com Acesso GVT
Demattos, é a primeira vez que entro no Under... Como faço para mandar uma MP?
Re: PPPoE Client com Acesso GVT
Bom dia.
Mediga ema coisa você
Re: PPPoE Client com Acesso GVT
Primeiro: Verifique seu nat para a nova interface pppoe-client. Aparentemente o mais provável.
Segundo: Dê uma olhada no perfil que sua conexão pppoe-client velox está usando e configure-a na conexão gvt.
Re: PPPoE Client com Acesso GVT
Bom dia.
O que esta acontecendo??
você renomeou a interface que colocou o link da GVT, deicha ela com default Ether1 normal, se trocar o nome não funciona ok
agradece se funcionar Abraço.
Re: PPPoE Client com Acesso GVT
Pessoal, o problema foi resolvido. Tive que ir nas casas dos meus clientes trocando o DNS para o 8.8.8.8 - Como o amigo falou, a GVT não funciona com dns da OI
Re: PPPoE Client com Acesso GVT
nao precisa ir de cliente em cliente para resolver isso. dá resolver no proprio mikrotik.
amanhã te passo á dica, ok!!
Re: PPPoE Client com Acesso GVT
Re: PPPoE Client com Acesso GVT
Bastava voce colocar o dns no Mikrotik
ou voc tem ip fixo nos crintes