Static ip RH5 num funciona

Boa tarde galera. sempre utilizei debian e versões antigas do rh, mais agora instalei o rh5 aqui e quando coloco ip statico nele da isso:

vo no diretorio /etc/sysconfig/network/devices abro arquivo da eth0 e edito como abaixo so pra ver se muda.

DEVICE = eth0
ONBOOT = yes
BOOTPROTO = static
IPADDR = 192.168.0.2
NETMASK = 255.255.255.0
NETWORK = 192.168.0.0
BROADCAST = 192.168.0.255
GATEWAY = 192.168.0.1

me retorna isso

[root@localhost network-scripts]# /etc/init.d/network restart
ifcfg-eth0: line 3: DEVICE: command not found
ifcfg-eth0: line 4: ONBOOT: command not found
ifcfg-eth0: line 5: BOOTPROTO: command not found
ifcfg-eth0: line 6: IPADDR: command not found
ifcfg-eth0: line 7: NETMASK: command not found
ifcfg-eth0: line 8: NETWORK: command not found
ifcfg-eth0: line 9: BROADCAST: command not found
ifcfg-eth0: line 10: GATEWAY: command not found
Shutting down interface eth0: ifcfg-eth0: line 3: DEVICE: command not found
ifcfg-eth0: line 4: ONBOOT: command not found
ifcfg-eth0: line 5: BOOTPROTO: command not found
ifcfg-eth0: line 6: IPADDR: command not found
ifcfg-eth0: line 7: NETMASK: command not found
ifcfg-eth0: line 8: NETWORK: command not found
ifcfg-eth0: line 9: BROADCAST: command not found
ifcfg-eth0: line 10: GATEWAY: command not found
ifcfg-eth0: line 3: DEVICE: command not found
ifcfg-eth0: line 4: ONBOOT: command not found
ifcfg-eth0: line 5: BOOTPROTO: command not found
ifcfg-eth0: line 6: IPADDR: command not found
ifcfg-eth0: line 7: NETMASK: command not found
ifcfg-eth0: line 8: NETWORK: command not found
ifcfg-eth0: line 9: BROADCAST: command not found
ifcfg-eth0: line 10: GATEWAY: command not found
ifcfg-eth0: line 3: DEVICE: command not found
ifcfg-eth0: line 4: ONBOOT: command not found
ifcfg-eth0: line 5: BOOTPROTO: command not found
ifcfg-eth0: line 6: IPADDR: command not found
ifcfg-eth0: line 7: NETMASK: command not found
ifcfg-eth0: line 8: NETWORK: command not found
ifcfg-eth0: line 9: BROADCAST: command not found
ifcfg-eth0: line 10: GATEWAY: command not found
[ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: ifcfg-eth0: line 3: DEVICE: command not found
ifcfg-eth0: line 4: ONBOOT: command not found
ifcfg-eth0: line 5: BOOTPROTO: command not found
ifcfg-eth0: line 6: IPADDR: command not found
ifcfg-eth0: line 7: NETMASK: command not found
ifcfg-eth0: line 8: NETWORK: command not found
ifcfg-eth0: line 9: BROADCAST: command not found
ifcfg-eth0: line 10: GATEWAY: command not found
ifcfg-eth0: line 3: DEVICE: command not found
ifcfg-eth0: line 4: ONBOOT: command not found
ifcfg-eth0: line 5: BOOTPROTO: command not found
ifcfg-eth0: line 6: IPADDR: command not found
ifcfg-eth0: line 7: NETMASK: command not found
ifcfg-eth0: line 8: NETWORK: command not found
ifcfg-eth0: line 9: BROADCAST: command not found
ifcfg-eth0: line 10: GATEWAY: command not found
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
ifcfg-eth0: line 3: DEVICE: command not found
ifcfg-eth0: line 4: ONBOOT: command not found
ifcfg-eth0: line 5: BOOTPROTO: command not found
ifcfg-eth0: line 6: IPADDR: command not found
ifcfg-eth0: line 7: NETMASK: command not found
ifcfg-eth0: line 8: NETWORK: command not found
ifcfg-eth0: line 9: BROADCAST: command not found
ifcfg-eth0: line 10: GATEWAY: command not found
Missing config file ifcfg-ifcfg-eth0.
[ OK ]
[root@localhost network-scripts]#

Já aconteceu com alguem isso ?

comigo nunca aconteceu não mas,
ao que me parece ... ( parece )
deve ser por que não "deve" estar especificado o enterpretador do script ai...
tipo...

#!/bin/sbin
no topo do arquivo
ou sabe quando vc vai criar um script e coloca o enterpretador. tipo:

#!/bin/bash

num será isso ???

todo caso brother, se eu não me engano o redhat5 não tem o comando "linuxconf" ???
ou se eu não me engano...
da pra vc fazer atraves do comando

netconf

faz tempo q num uso redhat mas ve ai...

Cara.. Você tá fazendo isso em um CentOS ou um RHEL (Red Hat Enterprise Linux) 5?

Se for para alterar uma configuração IP, você deve procurar o seguinte arquivo:

/etc/sysconfig/network-scripts/ifcfg-ethX, onde X é a sua plca de rede, assim:

/etc/sysconfig/network-scripts/ifcfg-eth0

E aí você pode por essas configurações que você listou acima...

Citação:

---

DEVICE = eth0
ONBOOT = yes
BOOTPROTO = static
IPADDR = 192.168.0.2
NETMASK = 255.255.255.0
NETWORK = 192.168.0.0
BROADCAST = 192.168.0.255
GATEWAY = 192.168.0.1

---

Depois, reinicia o serviço de rede pra ver o que acontece...

Citação:

---

[root@localhost ~]# service network restart

---

No arquivo que você citou, você pode configurar os seguintes itens:

28.1.22. /etc/sysconfig/network - CentOS.org:
http://www.centos.org/docs/5/html/5....g-network.html

14.2.1. Ethernet Interfaces - CentOS.org:
http://www.centos.org/docs/5/html/5....aces-eth0.html

Tem um arquivo que lista todos os parâmetros de configuração disponíveis no seu sistema, ele fica em /usr/share/doc/initscripts-<versão>/sysconfig.txt.

É uma boa dar uma olhada nele!

Espero ter ajudado! :sheep:

Vitor