Pessoal muito obrigado pela atenção de todos, isso que diferencia o esse forum dos outros, mas vamus lá.
Depois de muito pesquizar, lento o manual (infelismente so tem do 2.9), uso o MK 3.23 acabei encontranto um dados inportante.
"max-mru (integer; default: 1480) - Maximum Receive Unit. The optimal value is the MTU of the interface the tunnel is working over decreased by 20 (so, for 1500-byte Ethernet link, set the MTU to 1480 to avoid fragmentation of packets)
max-mtu (integer; default: 1480) - Maximum Transmission Unit. The optimal value is the MTU of the interface the tunnel is working over decreased by 20 (so, for 1500-byte Ethernet link, set the MTU to 1480 to avoid fragmentation of packets)"
Ele pede para mudar o valor de 20 em 20 é isso mesmo?
mais na frente em soluçoes de problemas tem,
- I can get through the PPPoE link only small packets (eg. pings)
You need to change mss of all the packets passing through the PPPoE link to the value of PPPoE link's MTU-40 at least on one of the peers. So for PPPoE link with MTU of 1480:
[admin@MT] interface pppoe-server server> set 0 max-mtu=1440 max-mru=1440
[admin@MT] interface pppoe-server server> print
Flags: X - disabled
0 service-name="mt" interface=wlan1 max-mtu=1440 max-mru=1440
authentication=pap,chap,mschap1,mschap2 keepalive-timeout=10
one-session-per-host=yes max-sessions=0 default-profile=default
[admin@MT] interface pppoe-server server>
no meu caso não passa nada.
enthaum resolvi mudar os valor mtu e mru para 1440, aparentemente resolveu o problema so falta verificar em um cliente, que nao esta no momento.
Quaquer coisa me avisem ai.