Ajuda para instalar PCMCIA Senao NL2511CD Plus EXT2
Bom dia!
Estou precisando de uma ajuda para instalar um cartão pcmcia wireless Senao NL2511CD Plus EXT2 no debian...
Já instalei o wireless-tools, mas o iwconfig me mostra apenas o seguinte:
debian:/var/log# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
sit0 no wireless extensions.
Não sei que interface é essa sit0... Se alguém puder esclarecer...
Parece que o módulo é carregado, me corrijam caso eu esteja errado:
debian:/var/log# lsmod
Module Size Used by
isofs 32540 0
udf 73156 0
snd_pcm_oss 38368 0
snd_pcm 68676 1 snd_pcm_oss
snd_timer 20996 1 snd_pcm
snd_page_alloc 9640 1 snd_pcm
snd_mixer_oss 15200 1 snd_pcm_oss
snd 47012 4 snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 9248 1 snd
i915 17600 2
drm 61332 3 i915
nfs 202828 0
nfsd 197936 17
exportfs 5600 1 nfsd
lockd 54344 3 nfs,nfsd
nfs_acl 3584 2 nfs,nfsd
sunrpc 138812 13 nfs,nfsd,lockd,nfs_acl
nls_iso8859_1 4256 1
ntfs 192564 1
ipv6 226016 16
tsdev 7520 0
sg 31292 0
sr_mod 15876 0
cdrom 32544 1 sr_mod
psmouse 35016 0
parport_pc 32132 0
parport 33256 1 parport_pc
pcspkr 3072 0
8139cp 21920 0
ehci_hcd 28136 0
uhci_hcd 21164 0
usbcore 112644 3 ehci_hcd,uhci_hcd
shpchp 33024 0
pci_hotplug 28704 1 shpchp
8139too 25120 0
mii 5344 2 8139cp,8139too
yenta_socket 24460 1
rsrc_nonstatic 11840 1 yenta_socket
pcmcia_core 36852 2 yenta_socket,rsrc_nonstatic
i2c_i801 7468 0
i2c_core 19680 1 i2c_i801
intel_agp 21148 1
agpgart 29896 3 drm,intel_agp
dm_snapshot 15552 0
dm_mirror 19152 0
dm_mod 50232 2 dm_snapshot,dm_mirror
loop 15048 0
ext3 119240 1
jbd 52456 1 ext3
mbcache 8356 1 ext3
sd_mod 19040 5
ata_piix 13576 3
libata 89396 1 ata_piix
scsi_mod 124168 4 sg,sr_mod,sd_mod,libata
generic 5476 0 [permanent]
ide_core 110504 1 generic
evdev 9088 0
thermal 13608 0
processor 28840 1 thermal
fan 4804 0
-----------------------------------------
debian:/var/log# lspcmcia
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.0)
---------------------------------------------------
debian:/home/denilson# iwconfig -v
iwconfig Wireless-Tools version 28
Compatible with Wireless Extension v11 to v20.
Kernel Currently compiled with Wireless Extension v20.
---------------------------------------------------
ebian:/home/denilson# lspci
00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
Esta parte do dmesg parece bem interessante:
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 177
Yenta: CardBus bridge found at 0000:02:01.0 [1154:030a]
Yenta: ISA IRQ mask 0x0000, PCI irq 177
Socket status: 30000810
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x9000 - 0xafff
cs: IO port probe 0x9000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe1ffffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x42ffffff
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 201
eth0: RealTek RTL8139 at 0x9000, 00:83:08:01:15:26, IRQ 201
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
pccard: PCMCIA card inserted into slot 0
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000b000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000b400
usb usb2: configuration #1 chosen from 1 choice
...
Informações do meu sistema:
Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-24) ([email protected]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sat Dec 27 09:31:05 UTC 2008
Qualquer ajuda será muito bem vinda...
Obrigado
Denilson
