re: Programa para Gerar Configuração do Balanceamento PCC
Pessoal , podem me ajudar? Utilizei o programa , várias versões, e continuo com um problema de lentidão para navegação. Peço que dêem uma olhada nas minhas configurações. Se coloco uma adsl direto no server , fica bem mais rápido, mas o link fica no talo. Estou com receio que o link dedicado seja instalado sem que o PCC funcione corretamente, pois ainda vou precisar mesclar com adsl por um tempo, antes de me livrar dele.
3 links adsl ===>RB750===>ServerMK===>clientes
/interface ethernet
set 0 arp=enabled auto-negotiation=yes comment="" disabled=no full-duplex=yes \
l2mtu=1526 mac-address=00:0C:42:58:0C:D5 mtu=1500 name=ether1 speed=\
100Mbps
set 1 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"" disabled=no full-duplex=yes l2mtu=1524 mac-address=00:0C:42:58:0C:D6 \
master-port=none mtu=1500 name=ether2 speed=100Mbps
set 2 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"" disabled=no full-duplex=yes l2mtu=1524 mac-address=00:0C:42:58:0C:D7 \
master-port=none mtu=1500 name=ether3 speed=100Mbps
set 3 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"" disabled=no full-duplex=yes l2mtu=1524 mac-address=00:0C:42:58:0C:D8 \
master-port=none mtu=1500 name=ether4 speed=100Mbps
set 4 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"" disabled=no full-duplex=yes l2mtu=1524 mac-address=00:0C:42:58:0C:D9 \
master-port=none mtu=1500 name=ether5 speed=100Mbps
/ip pool
add name=pool1 ranges=192.168.50.10-192.168.50.20
/ip dhcp-server
add address-pool=pool1 authoritative=after-2sec-delay bootp-support=static \
disabled=no interface=ether5 lease-time=1m name=server1
/ppp profile
set default change-tcp-mss=yes comment="" name=default only-one=default \
use-compression=default use-encryption=default use-vj-compression=default
set default-encryption change-tcp-mss=yes comment="" name=default-encryption \
only-one=default use-compression=default use-encryption=yes \
use-vj-compression=default
/interface pppoe-client
add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=ether1 max-mru=1480 max-mtu=1480 \
mrru=disabled name=ether1adsl password=2226434343 profile=default \
service-name="" use-peer-dns=no [email protected]
add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=ether2 max-mru=1480 max-mtu=1480 \
mrru=disabled name=ether2adsl password=2226434343 profile=default \
service-name="" use-peer-dns=no [email protected]
add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=ether3 max-mru=1480 max-mtu=1480 \
mrru=disabled name=ether3adsl password=2226434343 profile=default \
service-name="" use-peer-dns=no [email protected]
/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=\
no
/ip address
add address=192.168.50.1/24 broadcast=192.168.50.255 comment="" disabled=no \
interface=ether5 network=192.168.50.0
/ip dhcp-server config
set store-leases-disk=5m
/ip dhcp-server lease
add address=192.168.50.11 client-id=1:0:4:75:7d:67:b comment="" disabled=no \
mac-address=00:04:75:7D:67:0B server=server1
add address=192.168.50.10 client-id=1:0:d0:9:f3:76:89 comment="" disabled=no \
mac-address=00:D0:09:F3:76:89 server=server1
/ip dhcp-server network
add address=192.168.50.0/24 comment="" gateway=192.168.50.1
re: Programa para Gerar Configuração do Balanceamento PCC
/ip dns
set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB \
max-udp-packet-size=512 primary-dns=200.149.55.142 secondary-dns=\
200.165.132.154
/ip dns static
add address=192.168.50.1 disabled=no name=PointNet.com ttl=1d
/ip firewall address-list
add address=200.155.80.0-200.155.255.255 comment=BRADESCO disabled=no list=\
loopback
add address=200.220.186.0/24 comment=BRADESCO disabled=no list=loopback
add address=200.220.178.0/24 comment=BRADESCO disabled=no list=loopback
add address=64.38.29.0/24 comment=RapidShare disabled=no list=loopback
add address=208.69.32.0/24 comment="" disabled=no list=loopback
add address=208.67.217.0/24 comment="" disabled=no list=loopback
add address=201.7.178.0/24 comment="" disabled=no list=loopback
add address=201.7.176.0/24 comment="" disabled=no list=loopback
add address=200.159.128.0/24 comment=BRADESCO disabled=no list=loopback
add address=201.7.176.0/20 comment="Vdeos - Globo" disabled=no list=loopback
add address=208.84.247.0/24 comment="Vdeos - terratv" disabled=no list=\
loopback
add address=200.154.56.0/24 comment="Vdeos - terratv" disabled=no list=\
loopback
add address=200.201.160.0/24 comment="Caixa Economica Federal" disabled=no \
list=loopback
add address=200.201.166.0/24 comment="" disabled=no list=loopback
add address=200.201.173.0/24 comment="" disabled=no list=loopback
add address=200.201.174.0/24 comment="" disabled=no list=loopback
add address=200.141.207.3 comment=Detran disabled=no list=loopback
/ip firewall filter
add action=drop chain=forward comment="BLOQUEIO DE DNS REVERSO" content=\
veloxzone disabled=no
/ip firewall mangle
add action=accept chain=prerouting comment="HTTPS FORA DO LOADBALACED" \
disabled=no dst-port=443 in-interface=ether5 protocol=tcp
add action=accept chain=prerouting comment="FORA DO LOADBALACED" disabled=no \
dst-address-list=loopback in-interface=ether5
add action=change-ttl chain=forward comment="Filtro Tracert / Traceroute" \
disabled=no new-ttl=set:30 protocol=icmp
add action=mark-connection chain=prerouting comment="" disabled=no \
in-interface=ether1adsl new-connection-mark=ether1adsl_conn passthrough=\
yes
add action=mark-connection chain=prerouting comment="" disabled=no \
in-interface=ether2adsl new-connection-mark=ether2adsl_conn passthrough=\
yes
add action=mark-connection chain=prerouting comment="" disabled=no \
in-interface=ether3adsl new-connection-mark=ether3adsl_conn passthrough=\
yes
add action=mark-routing chain=output comment="" connection-mark=\
ether1adsl_conn disabled=no new-routing-mark=to_ether1adsl passthrough=\
yes
add action=mark-routing chain=output comment="" connection-mark=\
ether2adsl_conn disabled=no new-routing-mark=to_ether2adsl passthrough=\
yes
add action=mark-routing chain=output comment="" connection-mark=\
ether3adsl_conn disabled=no new-routing-mark=to_ether3adsl passthrough=\
yes
add action=mark-connection chain=prerouting comment="" connection-state=new \
disabled=no dst-address-type=!local in-interface=ether5 \
new-connection-mark=ether1adsl_conn passthrough=yes \
per-connection-classifier=both-addresses-and-ports:3/0
add action=mark-connection chain=prerouting comment="" connection-state=new \
disabled=no dst-address-type=!local in-interface=ether5 \
new-connection-mark=ether2adsl_conn passthrough=yes \
per-connection-classifier=both-addresses-and-ports:3/1
add action=mark-connection chain=prerouting comment="" connection-state=new \
disabled=no dst-address-type=!local in-interface=ether5 \
new-connection-mark=ether3adsl_conn passthrough=yes \
per-connection-classifier=both-addresses-and-ports:3/2
add action=mark-routing chain=prerouting comment="" connection-mark=\
ether1adsl_conn disabled=no in-interface=ether5 new-routing-mark=\
to_ether1adsl passthrough=yes
add action=mark-routing chain=prerouting comment="" connection-mark=\
ether2adsl_conn disabled=no in-interface=ether5 new-routing-mark=\
to_ether2adsl passthrough=yes
add action=mark-routing chain=prerouting comment="" connection-mark=\
ether3adsl_conn disabled=no in-interface=ether5 new-routing-mark=\
to_ether3adsl passthrough=yes
re: Programa para Gerar Configuração do Balanceamento PCC
/ip firewall nat
add action=masquerade chain=srcnat comment="" disabled=no out-interface=\
ether1adsl
add action=masquerade chain=srcnat comment="" disabled=no out-interface=\
ether2adsl
add action=masquerade chain=srcnat comment="" disabled=no out-interface=\
ether3adsl
/ip route
add comment=Link1 disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
ether2adsl routing-mark=to_ether2adsl
add comment=Link2 disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
ether3adsl routing-mark=to_ether3adsl
add comment=Link0 disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
ether1adsl
add comment=Link0 disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
ether1adsl routing-mark=to_ether1adsl
add comment=Link1 disabled=no distance=2 dst-address=0.0.0.0/0 gateway=\
ether2adsl
add comment=Link2 disabled=no distance=3 dst-address=0.0.0.0/0 gateway=\
ether3adsl
/system script
add name=Link0Dow policy=\
ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive source="\
/ip firewall filter set [find comment=\"Link0\"] disable=yes;\r\
\n/ip firewall nat set [find comment=\"Link0\"] disable=yes;\r\
\n/ip firewall mangle set [find comment=\"Link0\"] disable=yes;\r\
\n/ip route set [find comment=\"Link0\"] disable=yes;"
add name=Link1Dow policy=\
ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive source="\
/ip firewall filter set [find comment=\"Link1\"] disable=yes;\r\
\n/ip firewall nat set [find comment=\"Link1\"] disable=yes;\r\
\n/ip firewall mangle set [find comment=\"Link1\"] disable=yes;\r\
\n/ip route set [find comment=\"Link1\"] disable=yes;"
add name=Link2Dow policy=\
ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive source="\
/ip firewall filter set [find comment=\"Link2\"] disable=yes;\r\
\n/ip firewall nat set [find comment=\"Link2\"] disable=yes;\r\
\n/ip firewall mangle set [find comment=\"Link2\"] disable=yes;\r\
\n/ip route set [find comment=\"Link2\"] disable=yes;"
add name=Link0Up policy=\
ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive source="\
/ip firewall filter set [find comment=\"Link0\"] disable=no;\r\
\n/ip firewall nat set [find comment=\"Link0\"] disable=no;\r\
\n/ip firewall mangle set [find comment=\"Link0\"] disable=no;\r\
\n/ip route set [find comment=\"Link0\"] disable=no;"
add name=Link1Up policy=\
ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive source="\
/ip firewall filter set [find comment=\"Link1\"] disable=no;\r\
\n/ip firewall nat set [find comment=\"Link1\"] disable=no;\r\
\n/ip firewall mangle set [find comment=\"Link1\"] disable=no;\r\
\n/ip route set [find comment=\"Link1\"] disable=no;"
add name=Link2Up policy=\
ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive source="\
/ip firewall filter set [find comment=\"Link2\"] disable=no;\r\
\n/ip firewall nat set [find comment=\"Link2\"] disable=no;\r\
\n/ip firewall mangle set [find comment=\"Link2\"] disable=no;\r\
\n/ip route set [find comment=\"Link2\"] disable=no;"
re: Programa para Gerar Configuração do Balanceamento PCC
Também está lento o acesso a RB em muitas ocasiões
re: Programa para Gerar Configuração do Balanceamento PCC
Citação:
Postado originalmente por
scan
Debian Lenny 5
Scan, não sei se o assunto se desviou um pouco ou não. Por isso já peço desculpas se estou errado.
Mas esta indicação de Debian Lenny5 seria para fazer o servidor de DNS?
Onde eu encontro esta versão do debian. No site oficial tem vários links, e eu procuro uma versão bem mais enxuta pois não vou precisar de todos os recursos. Qual daqueles links tem a versão mais básica?
Eu baixei um iso com cerca de 147 mega, mas deu sempre um erro no mesmo ponto.