Problema ao ativar inoDB no Mysql-5.1.37

À todos,

Após descomentar as linhas referente ao innoDB no arquivo my.cnf e salvá-lo, tento iniciar o Mysql-5.1.37 e recebo o seguinte erro:

"Starting Mysql. ERROR! Manager of pid-file quit without updating file."

Abaixo segue o arquivo my.cnf.

# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /usr/local/mysql/var) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /tmp/mysql.sock
#bind-address = 0.0.0.0

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port = 3306
socket = /tmp/mysql.sock
skip-locking
key_buffer_size = 16M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
innodb_data_home_dir = /usr/local/mysql/var/
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = /usr/local/mysql/var/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

Att,
Marcio

Tente excluir o arquivo mysql pid em /var/run, mate todo o processo do mysql (comando killall ), tenha certeza que está definido com stick bit o tmp/ (ls-ld /tmp) e inicie o MySQL novamente. O que pode ajudar é dar uma olhada em /var/log para os logs de erro do mysql.

Os caminhos dos diretórios podem variar de acordo com a distribuição.

Pode ser que te ajude.

Abraços

A distro em que o mysql-5.1.37 estah instalado eh o Slackware 13.1.

# /etc/my.cnf -> arquivo de configuracao
# /usr/local/mysql -> diretorio padrao
# /usr/local/mysql/var -> diretorio onde ficam os logs

Abaixo segue o log de erro gerado apos ativar o innoDB.

110405 11:48:18 mysqld_safe mysqld from pid file /usr/local/mysql/var/ibc102.pid ended
110405 11:51:43 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql/var
110405 11:51:43 [ERROR] /usr/local/mysql/libexec/mysqld: unknown variable 'innodb_data_home_dir=/usr/local/mysql/var/'
110405 11:51:43 [ERROR] Aborting

110405 11:51:43 [Note] /usr/local/mysql/libexec/mysqld: Shutdown complete

Pelo que entendi o diretorio jah estah criado (/usr/local/mysql/var), certo?

Att,
Carecula