add vc hj sim [email protected] vlwCitação:
Postado originalmente por cls7007
Versão Imprimível
add vc hj sim [email protected] vlwCitação:
Postado originalmente por cls7007
O grande barato dos fóruns é a troca de experiência, amigo até 15 dias atrás usava a mesma config que você está procurando, 02 adsl, uma de 4 M e uma de 2 M balançeadas por uma rb750g, vou postar minhas regras, so vc copiar e colar. ( créditos da regra do Luciano da PC Ram) Este é o famoso PCC balance, agora estou usando 02 links de 04 mega, dica deixe o link de 4 mega como "nra"
substitua pelo seus ips
aqui uso :
link 01: 192.168.0.1
link 02: 192.168.5.1
/ip route
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
192.168.0.1 routing-mark=to_nra scope=30 target-scope=10
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
192.168.5.1 routing-mark=to_nrb scope=30 target-scope=10
add comment="" disabled=no distance=2 dst-address=0.0.0.0/0 gateway=\
192.168.0.1 scope=30 target-scope=10
add comment="" disabled=no distance=3 dst-address=0.0.0.0/0 gateway=\
192.168.5.1 scope=30 target-scope=10
/ip firewall mangle
add action=accept chain=prerouting comment="SEM BALANCE" disabled=no \
dst-address-list=sem_balance in-interface=Saida
add action=mark-routing chain=output comment="" connection-mark=conn_na \
disabled=no new-routing-mark=to_ra passthrough=no
add action=mark-routing chain=output comment="" connection-mark=conn_nb \
disabled=no new-routing-mark=to_rb passthrough=no
add action=mark-connection chain=prerouting comment="" disabled=no \
dst-address-type=!local in-interface=Saida new-connection-mark=conn_ma0 \
passthrough=yes per-connection-classifier=both-addresses:2/0
add action=mark-connection chain=prerouting comment="" disabled=no \
dst-address-type=!local in-interface=Saida new-connection-mark=conn_mb1 \
passthrough=yes per-connection-classifier=both-addresses:2/1
add action=mark-routing chain=prerouting comment="" connection-mark=conn_ma0 \
disabled=no in-interface=Saida new-routing-mark=to_nra passthrough=no
add action=mark-routing chain=prerouting comment="" connection-mark=conn_mb1 \
disabled=no in-interface=Saida new-routing-mark=to_nrb passthrough=no
/ip firewall nat
add action=masquerade chain=srcnat comment="LIBERA NET PARA O MK" disabled=no \
out-interface=Link1
add action=masquerade chain=srcnat comment="" disabled=no out-interface=Link2
Vo testar agora, jaja eu mando resultado... vlw
Aqui nao rodou os 2links...Citação:
Postado originalmente por Claudio
vc usa seu modem em bridge ou router