Problemas c/ MPLS em enlaces
Bom dia!
Tipo, com base em códigos disponiveis no site da Mikrotik, e tutoriais disponiveis aqui no Forum, fiz o teste em um enlace que tenho aqui na empresa, são dois enlaces, que eu iria fazer o teste, mas no final das contas fiz o teste em somente um, problema:
Com WDS o enlace funionava perfeito passando 30mb, e delay de 1 a 18
Com MPLS o enlace funcionou, mas com limitação no tráfego, o mesmo passou somente 15 a 18mb e delay de 60 a 150 a 200.
por isso, venho por meio desta pedir que pessoas que já usam esta tecnologia, e que com certeza tenha um conhecimento melhor que o meu, possa me dar algumas dicas.
Abaixo segue o código para os dois enlaces, obs : n código vai estar setado como 5.8Ghz, mas o enlace é N.
Código:
##AP - Enlace 1
/interface wireless set wlan1 disabled=no ssid=PTP_08 frequency=5180 band=5ghz-a mode=bridge
/ip address add address=192.168.0.1/30 interface=wlan1
/ip address add address=192.168.1.1/24 interface=ether1
/mpls ldp set enabled=yes lsr-id=192.168.0.1 transport-address=192.168.0.1
/mpls ldp interface add interface=wlan1
/interface vpls add name=PTP_08 remote-peer=192.168.0.2 vpls-id=1:1 disabled=no
/interface bridge add name=bridge
/interface bridge> set 0 protocol-mode=rstp
/interface bridge port add bridge=bridge interface=ether1
/interface bridge port add bridge=bridge interface=ether2
/interface bridge port add bridge=bridge interface=ether3
/interface bridge port add bridge=bridge interface=PTP_08
##Cliente - Enlace 1
/interface wireless set wlan1 disabled=no ssid=PTP_08 band=5ghz-a mode=station
/ip address add address=192.168.0.2/30 interface=wlan1
/ip address add address=192.168.1.2/24 interface=ether1
/mpls ldp set enabled=yes lsr-id=192.168.0.2 transport-address=192.168.0.2
/mpls ldp interface add interface=wlan1
/interface vpls add name=PTP_08 remote-peer=192.168.0.1 vpls-id=1:1 disabled=no
/interface bridge add name=bridge
/interface bridge> set 0 protocol-mode=rstp
/interface bridge port add bridge=bridge interface=ether1
/interface bridge port add bridge=bridge interface=ether2
/interface bridge port add bridge=bridge interface=ether3
/interface bridge port add bridge=bridge interface=PTP_08
##AP - Enlace 2
/interface wireless set wlan1 disabled=no ssid=PTP_09 frequency=5180 band=5ghz-a mode=bridge
/ip address add address=192.168.0.5/30 interface=wlan1
/ip address add address=192.168.1.3/24 interface=ether1
/mpls ldp set enabled=yes lsr-id=192.168.0.5 transport-address=192.168.0.5
/mpls ldp interface add interface=wlan1
/interface vpls add name=PTP_09 remote-peer=192.168.0.6 vpls-id=1:1 disabled=no
/interface bridge add name=bridge
/interface bridge> set 0 protocol-mode=rstp
/interface bridge port add bridge=bridge interface=ether1
/interface bridge port add bridge=bridge interface=ether2
/interface bridge port add bridge=bridge interface=ether3
/interface bridge port add bridge=bridge interface=PTP_09
##Cliente - Enlace 2
/interface wireless set wlan1 disabled=no ssid=PTP_09 band=5ghz-a mode=station
/ip address add address=192.168.0.6/30 interface=wlan1
/ip address add address=192.168.1.4/24 interface=ether1
/mpls ldp set enabled=yes lsr-id=192.168.0.6 transport-address=192.168.0.6
/mpls ldp interface add interface=wlan1
/interface vpls add name=PTP_09 remote-peer=192.168.0.5 vpls-id=1:1 disabled=no
/interface bridge add name=bridge
/interface bridge> set 0 protocol-mode=rstp
/interface bridge port add bridge=bridge interface=ether1
/interface bridge port add bridge=bridge interface=ether2
/interface bridge port add bridge=bridge interface=ether3
/interface bridge port add bridge=bridge interface=PTP_09
Att.: Scan
Re: Problemas c/ MPLS em enlaces
O maior problema de se trabalhar com o MPLS é sinal, para que funcione bem, o sinal tem que estar ótimo (-55), senão, fatalmente vc terá problemas. Procure aqui no forum sobre o protocolo Nv2, se o seu cartão tiver essa tecnologia e sua RB tambem (o MK tem que estar atualizado, se não me engano da versão 5.5 para frente), vc conseguirá melhores resultados.
Re: Problemas c/ MPLS em enlaces
sinal -55 e alto demas ,o que pode estar atrapalhando o mpls e que ele roda encima do ospf ,se o ospf for por brodcast e a latencia aumentar demas vai ter problemas .por isso que ospf em redes wireless tem que ter certeza que os enlaces são perfeitos.
Re: Problemas c/ MPLS em enlaces
Sinal não é problema, até por que ele esta efetuando teste em bancada......alem do mais MPLS nada mais é que um protocolo de inserção rotulo......
Veja os ajustes de MTU das interfaces e também do MPLS.
Abs
Re: Problemas c/ MPLS em enlaces
Citação:
Postado originalmente por
luizrfabri
O maior problema de se trabalhar com o MPLS é sinal, para que funcione bem, o sinal tem que estar ótimo (-55), senão, fatalmente vc terá problemas. Procure aqui no forum sobre o protocolo Nv2, se o seu cartão tiver essa tecnologia e sua RB tambem (o MK tem que estar atualizado, se não me engano da versão 5.5 para frente), vc conseguirá melhores resultados.
NV2 não depende de cartão.
E MPLS não é sensivel ao ponto de exigir -55 de sinal.
É provavel que o problema do colega esteja na camada do enlace mesmo...