Duvida - CRS125-24G-1S-IN

Amigo boa noite,

Queria saber se todos aqui tem a mesma dificuldade para criar vlan´s com portas trunk neste tipo de equipamento?, ja pesquise no google sobre o assunto e mesmo assim não consegui fazer uma simples vlan entre dois CRS. Preciso criar 2 vlan que passe por 2 x portas trunk totalizando 2Gbytes, alguém sabe como fazer isso neste equipamento?

Obrigado,

Re: Duvida - CRS125-24G-1S-IN

Recentemente precisei fazer VLAN trunk em umas 260gs, porém fiquei todo enrolado. Seguindo o tópico aos demais que poderem ajudar ficamos gratos.

2 Anexo(s)

Amigos, boa tarde

Consegui resolver o meu problema, segue os comando executado para quem precisar criar VLAN e TRUNK no CRS125.

Anexo 63551
/interface ethernet
set [ find default-name=ether22 ] name=ether22-router-port3
set [ find default-name=ether23 ] master-port=ether22-router-port3 name=\
ether23-procurve-port25
set [ find default-name=ether24 ] master-port=ether22-router-port3 name=\
ether24-procurve-port26
set [ find default-name=sfp1 ] master-port=ether22-router-port3
set [ find default-name=ether1 ] master-port=ether22-router-port3
set [ find default-name=ether2 ] master-port=ether22-router-port3
set [ find default-name=ether3 ] master-port=ether22-router-port3
set [ find default-name=ether4 ] master-port=ether22-router-port3
set [ find default-name=ether5 ] master-port=ether22-router-port3
set [ find default-name=ether6 ] master-port=ether22-router-port3
set [ find default-name=ether7 ] master-port=ether22-router-port3
set [ find default-name=ether8 ] master-port=ether22-router-port3
set [ find default-name=ether9 ] master-port=ether22-router-port3
set [ find default-name=ether10 ] master-port=ether22-router-port3
set [ find default-name=ether11 ] master-port=ether22-router-port3
set [ find default-name=ether12 ] master-port=ether22-router-port3
set [ find default-name=ether13 ] master-port=ether22-router-port3
set [ find default-name=ether14 ] master-port=ether22-router-port3
set [ find default-name=ether15 ] master-port=ether22-router-port3
set [ find default-name=ether16 ] master-port=ether22-router-port3
set [ find default-name=ether17 ] master-port=ether22-router-port3
set [ find default-name=ether18 ] master-port=ether22-router-port3
set [ find default-name=ether19 ] master-port=ether22-router-port3
set [ find default-name=ether20 ] master-port=ether22-router-port3
set [ find default-name=ether21 ] master-port=ether22-router-port3 name=\
ether21-router-port2

/interface ethernet switch trunk
add member-ports=ether21-router-port2,ether22-router-port3 name=trunk1
add member-ports=ether23-procurve-port25,ether24-procurve-port26 name=trunk2

/interface ethernet switch egress-vlan-tag
add tagged-ports=trunk1,trunk2 vlan-id=5
add tagged-ports=trunk1,trunk2 vlan-id=10

/interface ethernet switch ingress-vlan-translation
add customer-vlan-format=untagged-or-tagged new-customer-vid=5 ports=\
ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8 sa-learning=yes \
service-vlan-format=untagged-or-tagged
add customer-vlan-format=untagged-or-tagged new-customer-vid=10 ports=\
ether8,ether9,ether10,ether11,ether12,ether13,ether14,ether15,ether16 \
sa-learning=yes service-vlan-format=untagged-or-tagged

/interface ethernet switch vlan
add ports=trunk1,trunk2 vlan-id=1
add ports=\
trunk1,trunk2,ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8 \
vlan-id=5
add ports="trunk1,trunk2,ether9,ether10,ether11,ether12,ether13,ether14,ether1\
5,ether16" vlan-id=10

/ip address
add address=192.168.88.2/24 interface=ether22-router-port3 network=\
192.168.88.0

/ip route
add distance=1 gateway=192.168.88.1

/system identity
set name=CRS125-24G-1S-RM

Para melhorar o desempenho da CRS desabilite os seguintes pacotes.

Anexo 63552

Fonte: http://www.forummikrotik.com/beginne...iguration.html

Obrigado a todos