Versão Imprimível
Boa tarde pessoal.
tenho uma RB que gerencia 2 locais distintos, porem agora surgiu a necessidade da rede 1 acessar um ip da rede 2.
Porem o ip da rede 1 é 10.20.0.0/24 e da rede 2 é 192.168.1.0/24.
Gostaria de saber se é possível a comunicação entre elas pois faremos o compartilhamento de algumas coisas.
na rb 1 adicione a regra
/ip route add dst-address=192.168.1.0/24 gateway=(ip da rb 2)
e na rb 2 adicione essa regra
/ip route add dst-address=10.20.0.0/24 gateway=(ip da rb 1)
ja é para uma rede pingar a outra
(ele tem 1 rb que gerencia duas redes) acredito que não precise fazer nada as duas redes estão no mesmo gateway.Citação:
Postado originalmente por baixinho930
Bom dia amigo, acabo de fazer a configuração mas infelizmente continua com o problema.Citação:
Postado originalmente por baixinho930
Se a RB é gateway dos dois lados, é só não ter nat em nenhum dos dois que ela vai fazer o meio de campo.
Essa rede esta sendo fechada por uma VPN, envie mais informações de como esta ligado.
Esta tudo na mesma RB. Lan1: 10.20.0..0 e Lan2 192.168.1.1 o engraçado é que tenho uma maquina que esta com um ip fora do pool e ela conecta normalmente (ping, acesso pelo navegador) mas só por essa maquina que esta fora do pool.Citação:
Postado originalmente por baixinho930
As maquinas que estão dentro do pool 10.20.0. não acessam a rede 192.168
Pesei isso tbm, mas não funcionou.Citação:
Postado originalmente por fhayashi
.Se esta tudo na mesma rb esquece a regra que te enviei, você colocando gateway nos equipamentos que estao na rede 10.20.0.0/24 e 192.168.1.0/24, voce vai ter acesso normalmente se estiver tanto na rede 1 como na rede 2
Ex: Pc1 ip - 10.20.0.2
gateway- 10.0.20.1
Pc2 ip - 192.168.100.2
gateway- 192.168.100.1
Se voce tiver um pc3 com o ip 192.168.100.100/24 com gateway 192.168.100.1, voce vai ter ping no pc1 e no pc2 normalmente, se caso esse mesmo pc3 estiver com um ip 10.20.0.100/24 com gateway 10.20.0.1, vai continuar pingando o pc1 e pc2
Imaginei que fosse funcionar de primeira tbm, mas por algum motivo não acessa.Citação:
Postado originalmente por baixinho930
Envie a configuração da rb para dar uma olhada.
Segue:Citação:
Postado originalmente por baixinho930
# aug/17/2018 12:25:26 by RouterOS 6.42.6
# software id = FRYX-W7PM
#
# model = RouterBOARD 3011UiAS
# serial number = 719F068953D9
/interface bridge
add fast-forward=no name="bridge1 - APs"
/interface ethernet
set [ find default-name=ether1 ] name="ether1 - Cabo DHCP Cliente"
set [ find default-name=ether2 ] name="ether2 - AP4 - 4 Andar"
set [ find default-name=ether3 ] name="ether3 - AP1"
set [ find default-name=ether4 ] name="ether4 - AP2"
set [ find default-name=ether5 ] name="ether5 - AP3"
set [ find default-name=ether6 ] name="ether6 - LAN"
set [ find default-name=ether8 ] name="ether8 - 4\BA Andar"
set [ find default-name=ether9 ] name="ether9 - GP"
set [ find default-name=ether10 ] name="ether10 - Mundivox"
/interface vlan
add interface="bridge1 - APs" name="vlan1 - Wappa" vlan-id=10
add interface="bridge1 - APs" name="vlan2 - Wappa-BYOD" vlan-id=11
add interface="bridge1 - APs" name="vlan3 - Wappa-Visitante" vlan-id=12
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MK_WappaVO
/ip firewall layer7-protocol
add name=Torrent regexp=utorrent.com
add comment="Bloqueio Torrent" name=L7-Torrent regexp="^(\\x13bittorrent proto\
col|azver\\x01\$|get /scrape\\\?info_hash=get /announce\\\?info_hash=|get \
/client/bitcomet/|GET /data\\\?fid=)|d1:ad2:id20:|\\x08'7P\\)[RP]"
add name=thepiratebay regexp=thepiratebay
/ip pool
add name="dhcp_pool1 - LAN" ranges=10.20.0.30-10.20.0.254
add name="dhcp_pool2 - Wappa" ranges=10.10.10.2-10.10.10.254
add name="dhcp_pool3 - WappaByod" ranges=10.10.11.2-10.10.11.254
add name="dhcp_pool4 - Visitante" ranges=192.168.12.2-192.168.12.254
add name="dhcp_pool6 - 4\BA Andar" ranges=192.168.1.10-192.168.1.254
/ip dhcp-server
add address-pool="dhcp_pool1 - LAN" authoritative=after-2sec-delay disabled=\
no interface="ether6 - LAN" lease-time=7h10m name=dhcp1
add address-pool="dhcp_pool2 - Wappa" authoritative=after-2sec-delay \
disabled=no interface="vlan1 - Wappa" name=dhcp2
add address-pool="dhcp_pool3 - WappaByod" authoritative=after-2sec-delay \
disabled=no interface="vlan2 - Wappa-BYOD" name=dhcp3
add address-pool="dhcp_pool4 - Visitante" authoritative=after-2sec-delay \
disabled=no interface="vlan3 - Wappa-Visitante" name=dhcp4
add address-pool="dhcp_pool6 - 4\BA Andar" authoritative=after-2sec-delay \
disabled=no interface="ether8 - 4\BA Andar" lease-time=12h name=dhcp6
/ppp profile
add local-address=10.20.0.1 name=VPN
/queue simple
add disabled=yes limit-at=10M/10M max-limit=10M/10M name=queue1 target=\
"vlan2 - Wappa-BYOD"
add limit-at=5M/5M max-limit=5M/5M name=queue2 target=\
"vlan3 - Wappa-Visitante"
add limit-at=5M/5M max-limit=5M/5M name="queue4 - Cameras" target=\
10.20.0.14/32
/snmp community
set [ find default=yes ] addresses=0.0.0.0/0
/system logging action
add name=gestorlog remote=10.20.0.15 target=remote
/interface bridge port
add bridge="bridge1 - APs" hw=no interface="ether3 - AP1"
add bridge="bridge1 - APs" hw=no interface="ether4 - AP2"
add bridge="bridge1 - APs" hw=no interface="ether5 - AP3"
add bridge="bridge1 - APs" hw=no interface="ether2 - AP4 - 4 Andar"
add bridge="bridge1 - APs" hw=no interface="ether1 - Cabo DHCP Cliente"
/interface pptp-server server
set authentication=pap,chap,mschap1,mschap2 enabled=yes
/ip address
add address=177.194.155.02/30 interface="ether10 - Mundivox" network=\
179.191.107.96
add address=10.20.0.1/24 interface="ether6 - LAN" network=10.20.0.0
add address=10.10.10.1/24 interface="vlan1 - Wappa" network=10.10.10.0
add address=10.10.11.1/24 interface="vlan2 - Wappa-BYOD" network=10.10.11.0
add address=192.168.12.1/24 interface="vlan3 - Wappa-Visitante" network=\
192.168.12.0
add address=182.135.17.15/29 interface="ether9 - GP" network=189.126.197.24
add address=192.168.1.1/24 interface="ether8 - 4\BA Andar" network=\
192.168.1.0
/ip cloud
set ddns-enabled=yes
/ip dhcp-server lease
add address=10.20.0.96 client-id=1:ec:8:6b:c1:be:f mac-address=\
EC:08:6B:C1:BE:0F server=dhcp1
/ip dhcp-server network
add address=10.10.10.0/24 dns-server=10.20.0.7,10.20.0.11 gateway=10.10.10.1
add address=10.10.11.0/24 dns-server=10.20.0.7,10.20.0.11,8.8.8.8 gateway=\
10.10.11.1
add address=10.20.0.0/24 dns-server=10.20.0.7,10.20.0.11 gateway=10.20.0.1
add address=192.168.1.0/24 dns-server=\
179.191.90.20,179.191.80.21,10.20.0.11,10.20.0.7 gateway=192.168.1.1
add address=192.168.2.0/24 dns-server=8.8.8.8,10.20.0.11 gateway=192.168.2.1
add address=192.168.12.0/24 dns-server=8.8.8.8,10.20.0.11 gateway=\
192.168.12.1
/ip dns
set allow-remote-requests=yes servers=10.20.0.7,10.20.0.11
/ip firewall filter
add action=accept chain=forward dst-address=192.168.1.5 dst-port="" protocol=\
tcp src-address=0.0.0.0/0 src-port=""
add action=drop chain=forward comment=Drop_torrent layer7-protocol=Torrent
add action=drop chain=forward layer7-protocol=thepiratebay
add action=drop chain=forward layer7-protocol=L7-Torrent
add action=accept chain=forward comment=\
"Acesso a rede 20.0 (AD 1 e 2, Impressora, OCS, TV, Switch e Ponto)" \
dst-address=10.20.0.2 src-address=10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.3 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.4 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.7 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.11 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.112 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.90 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.17 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.15 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.30 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.23 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.15 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=10.20.0.14 src-address=\
10.10.10.0/24
add action=accept chain=forward dst-address=192.168.1.10 src-address=\
10.10.10.0/24
add action=accept chain=forward comment="Acesso ao servidor DNS p/ rede BYOD" \
dst-address=10.20.0.7 src-address=10.10.11.0/24
add action=accept chain=forward dst-address=10.20.0.11 src-address=\
10.10.11.0/24
add action=accept chain=forward comment=\
"Acesso p/ autentica\E7\E3o no hotspot. (Server 07). da rede Visitante" \
dst-address=10.20.0.7 src-address=192.168.12.0/24
add action=accept chain=forward comment=\
"Acesso da rede 4 \BA Andar p/ autentica\E7\E3o no OCS e AD" dst-address=\
10.20.0.23 src-address=192.168.1.0/24
add action=accept chain=forward dst-address=10.20.0.7 src-address=\
192.168.1.0/24
add action=accept chain=forward dst-address=10.20.0.11 src-address=\
192.168.1.0/24
add action=drop chain=forward comment="Drop da rede Wappa p/ outras redes." \
dst-address=10.20.0.0/24 src-address=10.10.10.0/24
add action=drop chain=forward dst-address=10.10.11.0/24 src-address=\
10.10.10.0/24
add action=drop chain=forward dst-address=192.168.12.0/24 src-address=\
10.10.10.0/24
add action=drop chain=forward dst-address=192.168.1.0/24 src-address=\
10.10.10.0/24
add action=drop chain=forward comment="Drop da rede BYOD p/ outras redes." \
dst-address=10.20.0.0/24 src-address=10.10.11.0/24
add action=drop chain=forward dst-address=10.10.10.0/24 src-address=\
10.10.11.0/24
add action=drop chain=forward dst-address=192.168.12.0/24 src-address=\
10.10.11.0/24
add action=drop chain=forward dst-address=192.168.1.0/24 src-address=\
10.10.11.0/24
add action=drop chain=forward comment=\
"Drop de rede Visitante p/ outras redes." dst-address=10.20.0.0/24 \
src-address=192.168.12.0/24
add action=drop chain=forward dst-address=10.10.10.0/24 src-address=\
192.168.12.0/24
add action=drop chain=forward dst-address=10.10.11.0/24 src-address=\
192.168.12.0/24
add action=drop chain=forward dst-address=192.168.1.0/24 src-address=\
192.168.12.0/24
add action=drop chain=forward comment=\
"Drop da rede 4\BA Andar p/ outras redes." dst-address=10.10.10.0/24 \
src-address=192.168.1.0/24
add action=drop chain=forward dst-address=10.10.11.0/24 src-address=\
192.168.1.0/24
add action=drop chain=forward dst-address=10.20.0.0/24 src-address=\
192.168.1.0/24
add action=drop chain=forward dst-address=192.168.12.0/24 src-address=\
192.168.1.0/24
/ip firewall mangle
# p2p matcher is obsolete please use layer7 matcher instead
add action=mark-connection chain=prerouting comment="CONTROLE P2P" \
new-connection-mark=conn-p2p p2p=all-p2p passthrough=yes
/ip firewall nat
add action=masquerade chain=srcnat comment=\
"Mascaramento (p/ acesso a internet)" out-interface="ether10 - Mundivox"
add action=masquerade chain=srcnat out-interface="ether9 - GP"
add action=dst-nat chain=dstnat comment=\
"Cameras 11\BA andar, acesso externo." dst-port=37777 protocol=tcp \
to-addresses=10.20.0.14 to-ports=37777
add action=dst-nat chain=dstnat dst-port=554 protocol=tcp to-addresses=\
10.20.0.14 to-ports=554
add action=dst-nat chain=dstnat dst-port=9000 protocol=tcp to-addresses=\
10.20.0.14 to-ports=9000
/ip route
add distance=2 gateway=189.126.197.25 routing-mark=Tabela-GP
add distance=1 gateway=179.191.107.97
add distance=2 gateway=189.126.197.25
/ip route rule
add disabled=yes src-address=192.168.12.0/24 table=Tabela-GP
add src-address=10.10.11.0/24 table=Tabela-GP
add src-address=192.168.2.0/24 table=Tabela-GP
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/system clock
set time-zone-name=America/Sao_Paulo
/system identity
set name=MK_WappaVO
/system logging
add action=gestorlog prefix=GestorLog topics=account
/system ntp client
set enabled=yes primary-ntp=200.160.7.186 secondary-ntp=201.49.148.135
/system routerboard settings
set silent-boot=no
/system scheduler
add interval=1d name=Backup on-event=Backup policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=\
mar/28/2017 start-time=10:20:00
add interval=1d name=Log on-event=Log policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=\
mar/28/2017 start-time=10:20:00
/system script
add name=Backup owner=admin policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive source="# Scrip\
t de Backup\r\
\n\r\
\n/system backup save name=BKPMKT.backup\r\
\n:delay 2s\r\
\n:global data [/system clock get date]\r\
\n:global hora [/system clock get time]\r\
\n/tool e-mail send to="email@email" subject="Mikrotik: B\
ackup Automatico realizado em \$data as \$hora" file="BKPMKT.backup" bo\
dy="Em anexo, arquivo de backup do equipamento RB3011 realizado as \$hora\
\_de \$data.""
add name=Log owner=admin policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive source="# Scrip\
t de Log\r\
\n\r\
\n/log print file=LOGMKT.txt\r\
\n:delay 2s\r\
\n:global data [/system clock get date]\r\
\n:global hora [/system clock get time]\r\
\n/tool e-mail send to="email.@email" subject="Mikrotik: L\
og Automatico realizado em \$data as \$hora" file="LOGMKT.txt" body="E\
m anexo, arquivo de log do equipamento RB3011 realizado realizado as \$hor\
a de \$data.""
/tool e-mail
set address=smtp.gmail.com password=GA2jYFCGx1jj port=587 start-tls=yes user=\
email@email
/tool graphing interface
add
/tool graphing queue
add
/tool graphing resource
add