como eu pego log do meu boot pra posta ele aki/;??
Versão Imprimível
como eu pego log do meu boot pra posta ele aki/;??
Digita:
dmesg >> boot_log.txt
E poste o conteudo do boot_log.txt aqui =)
tipo isso esta muito estranho .... vou te passar uns passos ..
tar -zxvf kenel.tar.gz depois entra no dir linux ( se ja existia um link apague ele antes de tar o kernel ) depois make menuconfig .... ai foi o ponto q eu acho q vc deve ter errado ... se vc tirou algo q naum poderia ... ou naum botou ... bem sei la .... se vc ja faz isso antes naum deveria haver erro ... bem mas depois dessa etapa seria make bzImage ... make modules ... make modules_install ... depois vc tera de copiar seu novo bzImage p/ o boot ou renomealo como vmlinuz ... como vc queria ... resumindo vc tera q acertar o lilo q ja sao outros 500 . outra pergunta vc estava usando source ou rpm ? so p/ saber ... acho q e isso ... se vc e iniciante p/ recopilacao do kernel e normal toma umas nas cabeca .... eu sei como era isso bem espero q eu tenha ajudado pq isso aki naum resolve seu problema :/
[root@localhost root]# dmesg boot_log.txt
Linux version 2.4.18-14custom (root@dhcppc0) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #2 SMP Sun Dec 15 03:14:56 BRST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/hdc1/ LABEL=/ hdd=ide-scsi
ide_setup: hdd=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 949.999 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1893.99 BogoMIPS
Memory: 512404k/524224k available (1395k kernel code, 9260k reserved, 347k data, 260k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 8192 (order: 4, 65536 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=64322 max_file_pages=0 max_inodes=0 max_dentries=64322
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Checking ´hlt´ instruction... OK.
POSIX conformance testing by UNIFIX
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU0: AMD Athlon(tm) processor stepping 02
per-CPU timeslice cutoff: 731.61 usecs.
task migration cache decay timeout: 10 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 949.9804 MHz.
..... host bus clock speed is 199.9958 MHz.
cpu: 0, clocks: 1999958, slice: 999979
CPU0<T0:1999952,T1:999968,D:5,S:999979,C:1999958>
migration_task 0 on cpu=0
PCI: PCI BIOS revision 2.10 entry at 0xfb4d0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
Journalled Block Device driver loaded
JFS development version: $Name: $
pty: 256 Unix98 ptys configured
block: 992 slots per queue, batch=248
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: detected chipset, but driver not compiled in!
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda<IMG SRC="images/forum/icons/icon_biggrin.gif">MA, hdb<IMG SRC="images/forum/icons/icon_razz.gif">io
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc<IMG SRC="images/forum/icons/icon_biggrin.gif">MA, hdd<IMG SRC="images/forum/icons/icon_biggrin.gif">MA
hda: Maxtor 91728D8, ATA DISK drive
hdc: FUJITSU MPB3021ATU, ATA DISK drive
hdd: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 33750864 sectors (17280 MB) w/512KiB Cache, CHS=2100/255/63
hdc: 4224150 sectors (2163 MB), CHS=4470/15/63
Partition check:
hda: hda1 hda2
hdc: hdc1 hdc2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
es1371: version v0.30 time 03:18:14 Dec 15 2002
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 3276<IMG SRC="images/forum/icons/icon_cool.gif">
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 260k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 14:51:18 Dec 15 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:07.2
PCI: Sharing IRQ 5 with 00:07.3
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:07.3
PCI: Sharing IRQ 5 with 00:07.2
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]>
hid-core.c: USB HID support drivers
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide1(22,1), internal journal
Adding Swap: 64252k swap-space (priority -1)
spurious 8259A interrupt: IRQ7.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05c (2001-07-0<IMG SRC="images/forum/icons/icon_cool.gif"> with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP(,...)]
parport_pc: Via 686A parallel port: io=0x378
Via 686a audio driver 1.9.1
PCI: Found IRQ 12 for device 00:07.5
ac97_codec: AC97 Audio codec, id: 0x414c:0x4326 (Unknown)
via82cxxx: Codec rate locked at 48Khz
via82cxxx: board #1 at 0xDC00, IRQ 12
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
[root@localhost root]#
estou achando q tem algo errado nesse log, pq nao aparece os erros
e eles aconteceram qd ele tenta buscar modulos para os dispositivos USB e qd ele tenta acionar a ethernet <IMG SRC="images/forum/icons/icon27.gif">
Tenta loadar na mao e retorna pra gente o erro..