-
Xcdroast!
selecionar pra gravar em 4x , mas ele mostro q iria gravar em 8X...
e um arquivo WAV de mais de 500MB... no final gravo em 999x e em menos
de 1 segundo..... puts...perdia a midia....
que será q aconteceu?! tentei gravar em DAO e falo q o gravador num aceita...
depois tentei gravar em TAO e deu na mesma......
meu gravador é um LG 52x24x52 ...
olha os logs:
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=ATAPI:0,0,0 gracetime=2 fs=2048k driveropts=burnfree -v -useinfo sp
eed=4 defpregap=0 -eject -pad -audio "/tmp/andyc.wav" ...
scsidev: ´ATAPI:0,0,0´
pregap1: -1
devname: ´ATAPI´
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
scsibus: 0 target: 0 lun: 0
TOC Type: 0 = CD-DA
Warning: Using ATA Packet interface.
Using libscg version ´schily-0.7´
Warning: The related libscg interface code is in pre alpha.
Driveropts: ´burnfree´
Warning: There may be fatal problems.
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : ´HL-DT-ST´
Identifikation : ´CD-RW GCE-8520B ´
Revision : ´1.00´
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1467136 = 1432 KB
FIFO size : 2097152 = 2048 KB
cdrecord: Drive needs to reload the media to return to proper status.
Track 01: audio 518 MB (51:19.62) no preemp pad
Total size: 518 MB (51:19.64) = 230973 sectors
Lout start: 518 MB (51:21/4<IMG SRC="images/forum/icons/icon_cool.gif"> = 230973 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
Disk sub type: Medium Type C, low Beta category (C-) (6)
ATIP start of lead in: -11619 (97:27/06)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 34
Manufacturer: DIGITAL STORAGE TECHNOLOGY CO.,LTD
Trying to clear drive status.
Starting to write CD/DVD at speed 8 in real TAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is ON.
Performing OPC...
Writing time: 0.060s
cdrecord: Input/output error. read track info: scsi sendcmd: no error
Average write speed 999.0x.
CDB: 52 01 00 00 00 FF 00 00 1C 00
Fixating...
status: 0x2 (CHECK CONDITION)
Fixating time: 0.002s
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 240s
BURN-Free was never needed.
cdrecord: fifo had 32 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
[ Esta mensagem foi editada por: PiTsA em 25-06-2003 08:39 ]
-
Xcdroast!
Eita, ja aconteceu isso comigo, mudei de midia e funcionou, mas creio nao ter algo a ver com a midia nao, *eu nao uso o XCDRoast*... =)
-
Xcdroast!
ta bom.... mas explique entaum como gravar um cd decentemente a uma velocidade de 4x?!
mas tipo....num da pra ter idéia do q é o erro acima?!
-
Xcdroast!
-
Xcdroast!
era CD-R normal.....
ainda naum usei CD-RW aqui.....
mas como eu configuro pra gravar no minimo um CD simples?!