Configurar dois cartões orinoco
Caros colegas,
Estou precisando de ajuda da comunidade pra configurar dois cartões orinoco wireless no mesmo servidor, um consigo configurar mas outro não faco ideia como proceder pra levantar o outro cartão, alguem poderia dar ulguma sugestão.
Atenciosamente,
Odair Borges
Configurar dois cartões orinoco
Velho .. é o seguinte .. o procedimento é mesmo que vc fez para levantar o primeiro cartao....
verifique se nao esta havendo nenhum conflito de IRQ... etc
da uma olhanda nos logs..
posta pra nois ai os erros q tao dando...
blza
By
Kernel Panic
Configurar dois cartões orinoco
Colega,
Vc estava certo o S.O esta levantando os dois cartões agora, so que ele assume o ultimo ip para os dois cartões...segue o network.opts
case "$ADDRESS" in
*,*,*,*)
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT="eth0"
# Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
DHCP="n"
# If you need to explicitly specify a hostname for DHCP requests
DHCP_HOSTNAME=""
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.168.8.150"
NETMASK="255.255.255.0"
NETWORK="192.168.8.0"
BROADCAST="192.168.8.255"
# Gateway address for static routing
GATEWAY=""
# Things to add to /etc/resolv.conf for this interface
DOMAIN=""
SEARCH=""
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# If you need to override the interface's MTU...
MTU=""
# For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
# Extra stuff to do after setting up the interface
start_fn () { return; }
# Extra stuff to do before shutting down the interface
stop_fn () { return; }
# Card eject policy options
NO_CHECK=n
NO_FUSER=n
;;
esac
case "$ADDRESS" in
*,*,*,*)
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT="eth0"
# Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
DHCP="n"
# If you need to explicitly specify a hostname for DHCP requests
DHCP_HOSTNAME=""
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.168.1.150"
NETMASK="255.255.255.0"
NETWORK="192.168.1.0"
BROADCAST="192.168.1.255"
# Gateway address for static routing
GATEWAY=""
# Things to add to /etc/resolv.conf for this interface
DOMAIN=""
SEARCH=""
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# If you need to override the interface's MTU...
MTU=""
# For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
# Extra stuff to do after setting up the interface
start_fn () { return; }
# Extra stuff to do before shutting down the interface
stop_fn () { return; }
# Card eject policy options
NO_CHECK=n
NO_FUSER=n
;;
esac
Configurar dois cartões orinoco
Colega,
Vc estava certo o S.O esta levantando os dois cartões agora, so que ele assume o ultimo ip para os dois cartões...segue o network.opts
case "$ADDRESS" in
*,*,*,*)
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT="eth0"
# Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
DHCP="n"
# If you need to explicitly specify a hostname for DHCP requests
DHCP_HOSTNAME=""
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.168.8.150"
NETMASK="255.255.255.0"
NETWORK="192.168.8.0"
BROADCAST="192.168.8.255"
# Gateway address for static routing
GATEWAY=""
# Things to add to /etc/resolv.conf for this interface
DOMAIN=""
SEARCH=""
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# If you need to override the interface's MTU...
MTU=""
# For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
# Extra stuff to do after setting up the interface
start_fn () { return; }
# Extra stuff to do before shutting down the interface
stop_fn () { return; }
# Card eject policy options
NO_CHECK=n
NO_FUSER=n
;;
esac
case "$ADDRESS" in
*,*,*,*)
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT="eth0"
# Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
DHCP="n"
# If you need to explicitly specify a hostname for DHCP requests
DHCP_HOSTNAME=""
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.168.1.150"
NETMASK="255.255.255.0"
NETWORK="192.168.1.0"
BROADCAST="192.168.1.255"
# Gateway address for static routing
GATEWAY=""
# Things to add to /etc/resolv.conf for this interface
DOMAIN=""
SEARCH=""
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# If you need to override the interface's MTU...
MTU=""
# For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
# Extra stuff to do after setting up the interface
start_fn () { return; }
# Extra stuff to do before shutting down the interface
stop_fn () { return; }
# Card eject policy options
NO_CHECK=n
NO_FUSER=n
;;
esac