DHCP parou de funfar e naum levanta mais...

Pessoal, tinha configurado um dhcp-server e estava funfando redondinho, de repente parou de funfar e naum levanta mais. ele informa que naum tem uma subnet declarada, o que naum é verdade. Vejam a mensagem de erro abaixo, logo depois está postado o dhcpd.conf:

Jul 13 14:34:27 redeagle dhcpd: Internet Systems Consortium DHCP Server V3.0.1
Jul 13 14:34:27 redeagle dhcpd: Copyright 2004 Internet Systems Consortium.
Jul 13 14:34:27 redeagle dhcpd: All rights reserved.
Jul 13 14:34:27 redeagle dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Jul 13 14:34:27 redeagle dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Jul 13 14:34:27 redeagle dhcpd: Wrote 0 leases to leases file.
Jul 13 14:34:27 redeagle dhcpd:
Jul 13 14:34:27 redeagle dhcpd: No subnet declaration for eth0 (0.0.0.0).
Jul 13 14:34:27 redeagle dhcpd: ** Ignoring requests on eth0. If this is not what
Jul 13 14:34:27 redeagle dhcpd: you want, please write a subnet declaration
Jul 13 14:34:27 redeagle dhcpd: in your dhcpd.conf file for the network segment
Jul 13 14:34:27 redeagle dhcpd: to which interface eth0 is attached. **
Jul 13 14:34:27 redeagle dhcpd:
Jul 13 14:34:27 redeagle dhcpd:
Jul 13 14:34:27 redeagle dhcpd: Not configured to listen on any interfaces!
Jul 13 14:34:27 redeagle dhcpd:
Jul 13 14:34:27 redeagle dhcpd: If you did not get this software from ftp.isc.org, please
Jul 13 14:34:27 redeagle dhcpd: get the latest from ftp.isc.org and install that before
Jul 13 14:34:27 redeagle dhcpd: requesting help.
Jul 13 14:34:27 redeagle dhcpd:
Jul 13 14:34:27 redeagle dhcpd: If you did get this software from ftp.isc.org and have not
Jul 13 14:34:27 redeagle dhcpd: yet read the README, please read it before requesting help.
Jul 13 14:34:27 redeagle dhcpd: If you intend to request help from the [email protected]
Jul 13 14:34:27 redeagle dhcpd: mailing list, please read the section on the README about
Jul 13 14:34:27 redeagle dhcpd: submitting bug reports and requests for help.
Jul 13 14:34:27 redeagle dhcpd:
Jul 13 14:34:27 redeagle dhcpd: Please do not under any circumstances send requests for
Jul 13 14:34:27 redeagle dhcpd: help directly to the authors of this software - please
Jul 13 14:34:27 redeagle dhcpd: send them to the appropriate mailing list as described in
Jul 13 14:34:27 redeagle dhcpd: the README file.
Jul 13 14:34:27 redeagle dhcpd:
Jul 13 14:34:27 redeagle dhcpd: exiting.

=== dhcpd.conf começa agora=====
ddns-update-style none;
subnet 192.168.0.0 netmask 255.255.0.0 {
# default gateway
option routers 192.168.0.1;
option subnet-mask 255.255.255.0;

option domain-name "domain.org";

# Seting up an ip address is better here
option domain-name-servers ns.domain.org;
option nis-domain "domain.org";

range dynamic-bootp 192.168.0.128 192.168.0.254;
default-lease-time 21600;
max-lease-time 43200;

# we want the nameserver to appear at a fixed address
#host ns {
# next-server fixed.mandrakesoft.com;
# hardware ethernet 12:34:56:78:AB:CD;
# fixed-address 192.168.0.10;
#}
}

Agradeço qq. ajuda.

[]s.

Amigo, tenho aqui configurado da seguinte forma:

Código :

---

# Rede Principal
subnet 192.168.0.0 netmask 255.255.255.0 {
        option domain-name-servers 192.168.0.1;
        option routers 192.168.0.1;
        range 192.168.0.100 192.168.0.199;
        }

---

E tá funcionando legal...

Experimenta usar assim

Outra coisa a se analizar, e se o seu servidor DHCP está buscando o arquivo de configuração no local certo. Para ter certeza de que ele irá carregar o arquivo correto, dê o comando abaixo:

Código :

---

dhcpd -cf [local do arquivo de configuração]

---

Abraços,

vc tem mais de uma interface de rede configurada? inclusive ppp0? qdo o adsl levanta vc zera o ip da placa?
é isso que ele está reconhecendo e dando erro!