Debian Network - link up, 100Mbps, full-duplex, lpa 0x45E1

Citação:

---

Postado originalmente por ttjedi

passe ai as suas configurações para agente avaliar..... vc tah usando iptables para compartilhar a conexão????? valew!!!

---

Segue os logs Galera...
Erro:
May 30 06:26:02 debian syslogd 1.4.1#17: restart.
May 30 06:36:50 debian -- MARK --
May 30 06:38:05 debian kernel: NETDEV WATCHDOG: eth0: transmit timed out
May 30 06:38:05 debian kernel: eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
May 30 06:38:05 debian kernel: eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.


Interfaces :

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.49
netmask 255.255.255.0
network 192.168.0.254
broadcast 192.168.0.255
gateway 192.168.0.254
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.0.254
dns-search com


LSMOD

Module Size Used by
nls_iso8859_1 4352 1
nls_cp437 6016 1
vfat 13184 1
fat 41792 1 vfat
ipv6 229892 8
parport_pc 33348 0
parport 37320 1 parport_pc
floppy 54992 1
evdev 9088 0
pcspkr 3816 0
rtc 12088 0
snd_via82xx 26660 0
snd_ac97_codec 59268 1 snd_via82xx
snd_pcm 85384 1 snd_via82xx
snd_timer 23300 1 snd_pcm
snd_page_alloc 11144 2 snd_via82xx,snd_pcm
gameport 4736 1 snd_via82xx
snd_mpu401_uart 7296 1 snd_via82xx
snd_rawmidi 23204 1 snd_mpu401_uart
snd_seq_device 7944 1 snd_rawmidi
snd 50660 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
pciehp 83948 0
shpchp 87148 0
pci_hotplug 30640 2 pciehp,shpchp
amd64_agp 10696 1
agpgart 31784 1 amd64_agp
ehci_hcd 27908 0
uhci_hcd 29328 0
usbcore 104164 4 ehci_hcd,uhci_hcd
via82cxxx_audio 26248 0
uart401 11460 1 via82cxxx_audio
sound 75308 2 via82cxxx_audio,uart401
soundcore 9824 3 snd,via82cxxx_audio,sound
ac97_codec 16908 1 via82cxxx_audio
via_rhine 19848 0
mii 4864 1 via_rhine
capability 4872 0
commoncap 7168 1 capability
psmouse 17800 0
ide_cd 38176 0
cdrom 35740 1 ide_cd
reiserfs 209872 2
ide_generic 1664 0
ide_disk 16768 3
via82cxxx 12956 1
ide_core 125028 4 ide_cd,ide_generic,ide_disk,via82cxxx
unix 26036 30
font 8576 0
vesafb 6688 0
cfbcopyarea 3840 1 vesafb
cfbimgblt 3200 1 vesafb
cfbfillrect 3712 1 vesafb

em interfaces tente usar assim:

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback

# The first network card - this entry was created during the Debian installation
# (network, broadcast and gateway are optional)
auto eth0
iface eth0 inet static
address 192.168.0.1
netmask 255.255.255.248
network 192.168.0.0
broadcast 192.168.0.248
gateway 192.168.0.1


no arquivo /etc/resolv.conf coloque o seu DNS se quiser pode usar o que está abaixo:

nameserver 200.216.72.178
nameserver 200.216.72.179


Valew!!!!!

Citação:

---

Postado originalmente por ttjedi

em interfaces tente usar assim:

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback

# The first network card - this entry was created during the Debian installation
# (network, broadcast and gateway are optional)
auto eth0
iface eth0 inet static
address 192.168.0.1
netmask 255.255.255.248
network 192.168.0.0
broadcast 192.168.0.248
gateway 192.168.0.1


no arquivo /etc/resolv.conf coloque o seu DNS se quiser pode usar o que está abaixo:

nameserver 200.216.72.178
nameserver 200.216.72.179


Valew!!!!!

---

Puxa vida amigão, ainda nao deu certo, eu achei até que era coisa do kernel 2.6 porém eu rodei o kurumin com esse kernel e roda a rede perfeitamente !!!!

Abraços

so uma dica... apos alterar para essas configurações tente reiniciar a máquima.... so de teste.. pois isso ja aconteceu comigo uma vez....

Citação:

---

Postado originalmente por ttjedi

so uma dica... apos alterar para essas configurações tente reiniciar a máquima.... so de teste.. pois isso ja aconteceu comigo uma vez....

---

Olá Amigo,
Tentei fazer como vc me instruiu mas ainda nada......puts...nunca uma coisa tao facil ficou tao dificil !

Valeu pela dica.....mas nao vou desistir..... !

Abraços !