isso mesmo, ele precisa dividir a rede no roteador...
no roteador precisa configurar com máscara de 25 bits... pelo menos
Versão Imprimível
isso mesmo, ele precisa dividir a rede no roteador...
no roteador precisa configurar com máscara de 25 bits... pelo menos
olha soh como vc deve fazer:
gw-core01>
gw-core01>enable
gw-core01#config t
Enter configuration commands, one per line. End with CNTL/Z
gw-core01(config)#interface FastEthernet 0
gw-core01(config-if)#ip addr 200.200.200.1 255.255.255.128
gw-core01(config-if)#ip route 200.200.200.128 255.255.255.128 200.200.200.2
gw-core01(config)#ip route 0.0.0.0 0.0.0.0 201.0.0.1
gw-core01(config)#exit
gw-core01#copy running-config startup-config
Destination filename [startup-config]?
Building configuration. . .
[OK]
gw-core01#exit
Connection closed.
ai no seu linux faz assim:
ifconfig eth0 200.200.200.2 netmask 255.255.255.128
ifconfig eth1 200.200.200.129 netmask 255.255.255.128
route add default gw 200.200.200.1
no seu cliente:
200.200.200.130 netmask 255.255.255.128 gw 200.200.200.129
mto simples :)