Essas regras vem antes ou depois das regras de marcação odd/even?
Cara.. jah tentei de tudo aqui e a m**** do banco do brasil nao para de cair....
desculpa a insistencia...
Versão Imprimível
Quanto ao banco do brasil nem tenho regras especificas.
Talvez criar alguma para a porta 443 (https).
As regras sem dúvida que tem que vir antes, para processar antes.
Eita... acho q conseguimos...
Adicionei algumas regras além das que estao no Load Balancing - MikroTik Wiki
e aparentemente funcionou... tah segurando a conexao com o banco do brasil...
Minha config ficou assim:
Código :
/ ip dns set primary-dns=201.10.128.2 secondary-dns=201.10.1.2 \ allow-remote-requests=yes cache-size=2048KiB cache-max-ttl=1w / ip address add address=192.168.1.254/24 network=192.168.1.0 broadcast=192.168.1.255 \ interface=local comment="" disabled=no add address=172.16.1.1/24 network=172.16.1.0 broadcast=172.16.1.255 \ interface=link1 comment="" disabled=no add address=172.16.2.1/24 network=172.16.2.0 broadcast=172.16.2.255 \ interface=link2 comment="" disabled=no / ip firewall mangle add chain=prerouting in-interface=local dst-address=170.66.11.0/24 \ connection-state=new action=mark-connection new-connection-mark=banco \ passthrough=yes comment="" disabled=no add chain=prerouting in-interface=local dst-address=170.66.2.0/24 \ connection-state=new action=mark-connection new-connection-mark=banco \ passthrough=yes comment="" disabled=no add chain=prerouting in-interface=local connection-mark=banco \ action=mark-routing new-routing-mark=banco passthrough=no comment="" \ disabled=no add chain=prerouting in-interface=local connection-state=new nth=1,1,0 \ action=mark-connection new-connection-mark=odd passthrough=yes comment="" \ disabled=no add chain=prerouting in-interface=local connection-mark=odd \ action=mark-routing new-routing-mark=odd passthrough=no comment="" \ disabled=no add chain=prerouting in-interface=local connection-state=new nth=1,1,1 \ action=mark-connection new-connection-mark=even passthrough=yes comment="" \ disabled=no add chain=prerouting in-interface=local connection-mark=even \ action=mark-routing new-routing-mark=even passthrough=no comment="" \ disabled=no / ip firewall nat add chain=srcnat connection-mark=banco action=src-nat to-addresses=172.16.1.1 \ to-ports=0-65535 comment="" disabled=no add chain=srcnat connection-mark=odd action=src-nat to-addresses=172.16.1.1 \ to-ports=0-65535 comment="" disabled=no add chain=srcnat connection-mark=even action=src-nat to-addresses=172.16.2.1 \ to-ports=0-65535 comment="" disabled=no / ip route add dst-address=0.0.0.0/0 gateway=172.16.1.254 scope=255 target-scope=10 \ routing-mark=odd comment="" disabled=no add dst-address=0.0.0.0/0 gateway=172.16.2.254 scope=255 target-scope=10 \ routing-mark=even comment="" disabled=no add dst-address=0.0.0.0/0 gateway=172.16.2.254 scope=255 target-scope=10 \ comment="" disabled=no add dst-address=0.0.0.0/0 gateway=172.16.1.254 scope=255 target-scope=10 \ routing-mark=banco comment="" disabled=no
Tenho ainda algumas duvidas...
Tenho 2 links de 1mb nesta maquina em baixo da torre fazendo este load... em cima da torre tenho 1 maquina com 4 wlans e 1 lan...
No grafico da lan q vai pra torre o trafego nao passa de 900kb... nao deveria chegar a pelo menos 1800kb agora q to com 2 links?
Vlw..
Como esta a coisa ai?
na maquina de baixo, 2 LAN recebendo o link e 1 lan mandando para cima, certo?
Veja no grafico das 2 lan´s de entrada, em qto estão..
e na LAN que manda lá para cima tem que ter +- a soma das 2 entradas
aproximadamente