Não pinga mas IPScan detecta os IPs
Meu MK está funcionando perfeitamente aqui. O MK faz pppoe, hotspot, controle de banda, ip X mac. Todos os PCs conectados navegam perfeitamente, mas há um porém: não consigo pingar ninguém, nem radios ou PCs, mas o IPSCAN do MK enxerga todos.
O MK está assim:
3 placas de rede
ether1 PCs com conexão a rádio
ether2 recebe o link do modem
ether3 PCs com conexão via cabo
ip address print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK BROADCAST INTERFACE
0 ;;; Radio
192.168.200.1/24 192.168.200.0 192.168.200.255 ether1
1 192.168.1.2/24 192.168.1.0 192.168.1.255 ether2
2 ;;; Rede
192.168.10.1/24 192.168.10.0 192.168.10.255 ether3
3 D 201.29.130.158/32 200.217.72.152 0.0.0.0 pppoe-out1
ip firewall nat print
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; ID Alta
chain=dstnat in-interface=pppoe-out1 protocol=tcp dst-port=4660-4675 action=dst-nat
to-addresses=192.168.10.15 to-ports=4660-4675
1 chain=srcnat out-interface=pppoe-out1 src-address=0.0.0.0 dst-address=0.0.0.0
action=masquerade
2 ;;; masquerade hotspot network
chain=srcnat src-address=192.168.200.0/24 action=masquerade
3 ;;; masquerade hotspot network
chain=srcnat src-address=192.168.10.0/24 action=masquerade
4 ;;; masquerade hotspot network
chain=srcnat src-address=192.168.200.0/24 action=masquerade
5 ;;; masquerade hotspot network
chain=srcnat src-address=192.168.10.0/24 action=masquerade
6 ;;; masquerade hotspot network
chain=srcnat src-address=192.168.200.0/24 action=masquerade
ip firewall filter> print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=input src-address=0.0.0.0 dst-address=0.0.0.0 action=accept
1 chain=output src-address=0.0.0.0 dst-address=0.0.0.0 action=accept
ip route> print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf
# DST-ADDRESS PREF-SRC G GATEWAY DISTANCE INTERFACE
0 ADC 192.168.1.0/24 192.168.1.2 ether2
1 ADC 192.168.10.0/24 192.168.10.1 ether3
2 ADC 192.168.200.0/24 192.168.200.1 ether1
3 ADC 200.217.72.152/32 201.29.130.158 pppoe-out1
4 AD 0.0.0.0/0 r 200.217.72.152 1 pppoe-out1
ip pool print
# NAME RANGES
0 pool1 192.168.200.10-192.168.200.254
1 pool2 192.168.10.10-192.168.10.254
O que que estou fazendo de errado???
