+ Responder ao Tópico



  1. #1

    Padrão WDS no MK!

    Amigos, estou com uma duvida, tem como conectar mais do que 1 cliente em wds em cada cartão do mk? Exemplo, 4 aps ovislink 5000 em 1 cartão usando wds .

  2. #2

    Padrão

    Citação Postado originalmente por samuew Ver Post
    Amigos, estou com uma duvida, tem como conectar mais do que 1 cliente em wds em cada cartão do mk? Exemplo, 4 aps ovislink 5000 em 1 cartão usando wds .

    Sim, você pode conectar vários ap's em um só cartão como no exemplo do colega abaixo...
    Última edição por Roberto21; 24-02-2008 às 13:52.



  3. #3

    Padrão

    Citação Postado originalmente por Roberto21 Ver Post
    Não, um WDS por cartão, mas...você pode criar ap's virtuais em cima desse mesmo cartão como por exemplo WLAN1 e colocar o segundo WDS no ap virtual!
    Um cada cartão??? oque sera que fiz errado, porque aqui tenho 8 wds que roda perfeitamente em um cartão só. rsrsrs

  4. #4

    Padrão

    Citação Postado originalmente por mandrak66 Ver Post
    Um cada cartão??? oque sera que fiz errado, porque aqui tenho 8 wds que roda perfeitamente em um cartão só. rsrsrs

    Então posta ai as suas configurações de WDS, por que aqui não consegui...rsssss...Agora imagina a sua rede, 8WDS em cima de um unico cartão..rssss...imagina o tráfego em cima desse cartão...Se for verdade balancei sua rede que ela vai melhorar muito!


    Boa tarde...rsssssss



  5. #5

    Padrão

    Citação Postado originalmente por Roberto21 Ver Post
    Então posta ai as suas configurações de WDS, por que aqui não consegui...rsssss...Agora imagina a sua rede, 8WDS em cima de um unico cartão..rssss...imagina o tráfego em cima desse cartão...Se for verdade balancei sua rede que ela vai melhorar muito!


    Boa tarde...rsssssss
    / interface wireless
    set "ap 2.4" name="ap 2.4" mtu=1500 mac-address=00.......... arp=enabled disable-running-check=no radio-name="torre 1 \
    2.4" mode=ap-bridge ssid=".............." area="" frequency-mode=manual-txpower country=no_country_set antenna-gain=0 \
    frequency=2457 band=2.4ghz-b scan-list=default rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps \
    supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps basic-rates-b=1Mbps basic-rates-a/g=6Mbps \
    max-station-count=2007 ack-timeout=dynamic tx-power=22 tx-power-mode=card-rates noise-floor-threshold=default \
    periodic-calibration=default periodic-calibration-interval=60 burst-time=disabled dfs-mode=none antenna-mode=ant-a \
    wds-mode=static wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150 wds-ignore-ssid=yes \
    update-stats-interval=disabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 \
    default-client-tx-limit=0 proprietary-extensions=post-2.9.25 hide-ssid=no security-profile=default \
    disconnect-timeout=3s on-fail-retry-time=100ms preamble-mode=long compression=no allow-sharedkey=no comment="" \
    disabled=no
    set "ap 5.8" name="ap 5.8" mtu=1500 mac-address=00:........................ arp=enabled disable-running-check=no radio-name="torre 1 \
    5.8" mode=ap-bridge ssid="5.8" area="" frequency-mode=manual-txpower country=no_country_set antenna-gain=0 \
    frequency=5745 band=5ghz scan-list=default rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps \
    supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps basic-rates-b=1Mbps basic-rates-a/g=6Mbps \
    max-station-count=2007 ack-timeout=dynamic tx-power=23 tx-power-mode=all-rates-fixed noise-floor-threshold=default \
    periodic-calibration=default periodic-calibration-interval=60 burst-time=disabled dfs-mode=none antenna-mode=ant-a \
    wds-mode=static wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150 wds-ignore-ssid=yes \
    update-stats-interval=disabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 \
    default-client-tx-limit=0 proprietary-extensions=post-2.9.25 hide-ssid=no security-profile=default \
    disconnect-timeout=3s on-fail-retry-time=100ms preamble-mode=long compression=no allow-sharedkey=no comment="" \
    disabled=no
    / interface wireless nstreme
    set "ap 2.4" enable-nstreme=no enable-polling=yes framer-policy=none framer-limit=3200
    set "ap 5.8" enable-nstreme=no enable-polling=yes framer-policy=none framer-limit=3200
    / interface wireless manual-tx-power-table
    set "ap 2.4" manual-tx-powers=1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps\
    :17,48Mbps:17,54Mbps:17
    set "ap 5.8" manual-tx-powers=1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps\
    :17,48Mbps:17,54Mbps:17
    / interface wireless security-profiles
    set default name="default" mode=none authentication-types="" unicast-ciphers="" group-ciphers="" wpa-pre-shared-key="" \
    wpa2-pre-shared-key="" eap-methods=passthrough tls-mode=no-certificates tls-certificate=none static-algo-0=none \
    static-key-0="" static-algo-1=none static-key-1="" static-algo-2=none static-key-2="" static-algo-3=none \
    static-key-3="" static-transmit-key=key-0 static-sta-private-algo=none static-sta-private-key="" \
    radius-mac-authentication=no group-key-update=5m
    / interface wireless wds
    add name="torre" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 5.8" wds-address=00:.................... \
    comment="" disabled=no
    add name="luciano" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:.................. \
    comment="" disabled=no
    add name="anderson" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:...................... \
    comment="" disabled=no
    add name="vivaldo" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:....................... \
    comment="" disabled=no
    add name="paulinho" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:................ \
    comment="" disabled=no
    add name="celia" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:..................... \
    comment="" disabled=no
    add name="carlos" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 5.8" wds-address=00:................... \
    comment="" disabled=no
    / interface wireless align
    set frame-size=300 active-mode=yes receive-all=yes audio-monitor=00:00:00:00:00:00 filter-mac=00:......................... \
    ssid-all=no frames-per-second=25 audio-min=-100 audio-max=-20
    / interface wireless connect-list
    add interface="ap 2.4" connect=yes mac-address=00:........................... ssid="" min-signal-strength=-120 area-prefix="" \
    security-profile=default comment="" disabled=no
    / interface wireless access-list
    add mac-address=00:..................... interface="ap 2.4" authentication=yes forwarding=yes ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:....................... interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:........................ interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:........................ interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:........................ interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:........................ interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:......................... interface="ap 5.8" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no


    Ve se é isso que voce precisa.
    Sei que não tem nada de especial, se alguen puder melhorar essas regras eu agradeço.

    Hum comentário, tudo esta sem segurança porque não consegui implementar com meu sistema que os aps rodam com o wappro.

    Valewwww
    Última edição por mandrak66; 24-02-2008 às 13:53.

  6. #6

    Padrão

    Citação Postado originalmente por mandrak66 Ver Post
    / interface wireless
    set "ap 2.4" name="ap 2.4" mtu=1500 mac-address=00:02:6F:4D:8C:39 arp=enabled disable-running-check=no radio-name="torre 1 \
    2.4" mode=ap-bridge ssid="webmorato" area="" frequency-mode=manual-txpower country=no_country_set antenna-gain=0 \
    frequency=2457 band=2.4ghz-b scan-list=default rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps \
    supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps basic-rates-b=1Mbps basic-rates-a/g=6Mbps \
    max-station-count=2007 ack-timeout=dynamic tx-power=22 tx-power-mode=card-rates noise-floor-threshold=default \
    periodic-calibration=default periodic-calibration-interval=60 burst-time=disabled dfs-mode=none antenna-mode=ant-a \
    wds-mode=static wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150 wds-ignore-ssid=yes \
    update-stats-interval=disabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 \
    default-client-tx-limit=0 proprietary-extensions=post-2.9.25 hide-ssid=no security-profile=default \
    disconnect-timeout=3s on-fail-retry-time=100ms preamble-mode=long compression=no allow-sharedkey=no comment="" \
    disabled=no
    set "ap 5.8" name="ap 5.8" mtu=1500 mac-address=00:02:6F:4D:8C:45 arp=enabled disable-running-check=no radio-name="torre 1 \
    5.8" mode=ap-bridge ssid="5.8" area="" frequency-mode=manual-txpower country=no_country_set antenna-gain=0 \
    frequency=5745 band=5ghz scan-list=default rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps \
    supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps basic-rates-b=1Mbps basic-rates-a/g=6Mbps \
    max-station-count=2007 ack-timeout=dynamic tx-power=23 tx-power-mode=all-rates-fixed noise-floor-threshold=default \
    periodic-calibration=default periodic-calibration-interval=60 burst-time=disabled dfs-mode=none antenna-mode=ant-a \
    wds-mode=static wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150 wds-ignore-ssid=yes \
    update-stats-interval=disabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 \
    default-client-tx-limit=0 proprietary-extensions=post-2.9.25 hide-ssid=no security-profile=default \
    disconnect-timeout=3s on-fail-retry-time=100ms preamble-mode=long compression=no allow-sharedkey=no comment="" \
    disabled=no
    / interface wireless nstreme
    set "ap 2.4" enable-nstreme=no enable-polling=yes framer-policy=none framer-limit=3200
    set "ap 5.8" enable-nstreme=no enable-polling=yes framer-policy=none framer-limit=3200
    / interface wireless manual-tx-power-table
    set "ap 2.4" manual-tx-powers=1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps\
    :17,48Mbps:17,54Mbps:17
    set "ap 5.8" manual-tx-powers=1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps\
    :17,48Mbps:17,54Mbps:17
    / interface wireless security-profiles
    set default name="default" mode=none authentication-types="" unicast-ciphers="" group-ciphers="" wpa-pre-shared-key="" \
    wpa2-pre-shared-key="" eap-methods=passthrough tls-mode=no-certificates tls-certificate=none static-algo-0=none \
    static-key-0="" static-algo-1=none static-key-1="" static-algo-2=none static-key-2="" static-algo-3=none \
    static-key-3="" static-transmit-key=key-0 static-sta-private-algo=none static-sta-private-key="" \
    radius-mac-authentication=no group-key-update=5m
    add name="profile1" mode=dynamic-keys authentication-types=wpa-psk,wpa2-psk,wpa-eap,wpa2-eap unicast-ciphers=tkip,aes-ccm \
    group-ciphers=tkip,aes-ccm wpa-pre-shared-key="amomeus4filhos" wpa2-pre-shared-key="amomeus4filhos" \
    eap-methods=passthrough tls-mode=no-certificates tls-certificate=none static-algo-0=none static-key-0="" \
    static-algo-1=none static-key-1="" static-algo-2=none static-key-2="" static-algo-3=none static-key-3="" \
    static-transmit-key=key-0 static-sta-private-algo=none static-sta-private-key="" radius-mac-authentication=no \
    group-key-update=5m
    / interface wireless wds
    add name="torre" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 5.8" wds-address=00:4F:69:51:48:BF \
    comment="" disabled=no
    add name="luciano" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:0A:52:7A:70:B5 \
    comment="" disabled=no
    add name="anderson" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:02:72:5D:49:1D \
    comment="" disabled=no
    add name="vivaldo" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:0A:52:7A:6D:00 \
    comment="" disabled=no
    add name="paulinho" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:05:9E:85:63:F7 \
    comment="" disabled=no
    add name="celia" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 2.4" wds-address=00:0E:2E:BB:94:7C \
    comment="" disabled=no
    add name="carlos" mtu=1500 arp=enabled disable-running-check=no master-interface="ap 5.8" wds-address=00:4F:69:51:479 \
    comment="" disabled=no
    / interface wireless align
    set frame-size=300 active-mode=yes receive-all=yes audio-monitor=00:00:00:00:00:00 filter-mac=00:4F:69:51:479 \
    ssid-all=no frames-per-second=25 audio-min=-100 audio-max=-20
    / interface wireless connect-list
    add interface="ap 2.4" connect=yes mac-address=00:12:0E:58:3E:19 ssid="" min-signal-strength=-120 area-prefix="" \
    security-profile=default comment="" disabled=no
    / interface wireless access-list
    add mac-address=00:12:0E:58:3E:19 interface="ap 2.4" authentication=yes forwarding=yes ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:0E:2E:BB:94:7C interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:05:9E:85:63:F7 interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:02:72:5D:49:1D interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:0A:52:7A:70:B5 interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:0A:52:7A:6D:00 interface="ap 2.4" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    add mac-address=00:4F:69:51:479 interface="ap 5.8" authentication=yes forwarding=no ap-tx-limit=0 client-tx-limit=0 \
    private-algo=none private-key="" comment="" disabled=no
    / interface wireless snooper
    set multiple-channels=yes channel-time=200ms receive-errors=no
    / interface wireless sniffer
    set multiple-channels=yes channel-time=200ms only-headers=yes receive-errors=no memory-limit=10 file-name="" file-limit=10 \
    streaming-enabled=no streaming-server=0.0.0.0 streaming-max-rate=0

    ve se é isso que voce precisa, se tiver algo errado, favor me ajudar.


    É, você está certo, retiro o que disse...rsssssss...Aliás, vou retirar agora.



  7. #7

    Padrão

    Citação Postado originalmente por Roberto21 Ver Post
    É, você está certo, retiro o que disse...rsssssss...Aliás, vou retirar agora.
    Roberto, por favor, retira sua ultima menssagem, pois eu corrigi a minha que esta mostrando os mac e a senha rsrsrs
    Muito obrigado
    foi mancada minha