Boa tarde, a situaçao é a seguinte:

adsl >> mt 01>>> >>>>>> mt 02 >>>>> mt 03 >>>> clientes

mt 01
ether1 recebe ppoe adsl
wlan1 10.10.10.1 /8 (ap bridge)
mt 02
wlan1 10.10.10.2/8 (station)
wlan2 192.168.100.1/24 (ap bridge)
mt 03
wlan1 192.168.100.2/24 (station)
wlan2 xxx.xxx.xxx.xxx ( meus clientes)


gostaria de saber se tem como ficar assim, e como configura?

mt 01
ether1 ppoe adsl
wlan1 10.10.10.1/8 (ap bridge)

mt 02
bridge01 10.10.10.2/8
wlan1 pega o ip da bridge 10.10.10.2/8 (station)
wlan2 pega o ip da bridge 10.10.10.2/8 (ap bridge)

mt 03
10.10.10.3/8 (station)