+ Responder ao Tópico



  1. Caro JeanFrank,

    Como te falei na pergunta anterior: gostaria de saber se vc ja testou este balanceamento com marcacao estavel com o HOTSPOT, pois estou tendo um probleminhas de clonagem de mac ??

    Vc poderia me add no msn para gente conversar melhor!!
    Caso sim, segue meu msn abaixo:

    microfoxinfor@gmail.com


    valeu e aguardo seu retorno,

    Costa Junior.

  2. Boa tarde

    Faz o seguinte pra amenizar isto ai a clonagem de mac, habilita ai a criptografia e utiliza os recursos de ip/bindings pra adicionar seus clientes amarrando com isto mac, ip entrada, ip saida, usuario, senha alem da criptografia fica muito bom tenta ai se tiver duvidas fala ai

    abaços



  3. Pessoal o que vcs me dizem desse balanceador de link que eu encontrei nesse link: Balanceador de Link TTR-8400 - Linkteck Wireless

  4. dá uma olha ai por favor e vejam e que tem de errado:

    / ip address
    add address=192.168.1.253/24 network=192.168.1.0 \
    broadcast=192.168.1.255 interface=Link1 comment="Link1" \
    disabled=no
    add address=192.168.10.253/24 network=192.168.10.0 \
    broadcast=192.168.10.255 interface=Link2 comment="Link2" \
    disabled=no
    add address=10.5.5.1/24 network=10.5.5.0 broadcast=10.5.5.255 \
    interface=clientes comment="" disabled=no

    / ip firewall address-list
    add list=Link1 address=192.168.1.253 comment="" disabled=no
    add list=Link2 address=192.168.10.253 comment="" disabled=no

    / ip firewall mangle
    add chain=prerouting in-interface=clientes src-address-list=Link1 \
    action=mark-connection new-connection-mark=Link1 passthrough=yes \
    comment="" disabled=no
    add chain=prerouting in-interface=clientes src-address-list=Link1 \
    action=mark-routing new-routing-mark=Link1 passthrough=no \
    comment="" disabled=no
    add chain=prerouting in-interface=clientes src-address-list=Link2 \
    action=mark-connection new-connection-mark=Link2 passthrough=yes \
    comment="" disabled=no
    add chain=prerouting in-interface=clientes src-address-list=Link2 \
    action=mark-routing new-routing-mark=Link2 passthrough=no \
    comment="" disabled=no
    add chain=prerouting in-interface=clientes connection-state=new \
    dst-limit=1,5,dst-address/1m40s nth=4,4,0 action=mark-connection \
    new-connection-mark=Link1 passthrough=yes comment="" disabled=no
    add chain=prerouting in-interface=clientes connection-mark=Link1 \
    action=add-src-to-address-list address-list=Link1 \
    address-list-timeout=1d comment="" disabled=no
    add chain=prerouting in-interface=clientes connection-mark=Link1 \
    action=mark-routing new-routing-mark=Link1 passthrough=no \
    comment="" disabled=no
    add chain=prerouting in-interface=clientes limit=1,5 \
    connection-state=new nth=4,4,1 action=mark-connection \
    new-connection-mark=Link2 passthrough=yes comment="" disabled=no
    add chain=prerouting in-interface=clientes connection-mark=Link2 \
    action=add-src-to-address-list address-list=Link2 \
    address-list-timeout=1d comment="" disabled=no
    add chain=prerouting in-interface=clientes connection-mark=Link2 \
    action=mark-routing new-routing-mark=Link2 passthrough=no \
    comment="" disabled=no

    / ip firewall nat
    add chain=srcnat connection-mark=Link1 action=src-nat \
    to-addresses=192.168.1.253 to-ports=0-65535 comment="" \
    disabled=no
    add chain=srcnat connection-mark=Link2 action=src-nat \
    to-addresses=192.168.10.253 to-ports=0-65535 comment="" \
    disabled=no

    / ip route
    add dst-address=0.0.0.0/0 gateway=192.168.1.254 scope=255 \
    target-scope=10 routing-mark=Link1 comment="" disabled=no
    add dst-address=0.0.0.0/0 gateway=192.168.10.1 scope=255 \
    target-scope=10 routing-mark=Link2 comment="" disabled=no


    [admin@MikroTik] ip route> print
    Flags: X - disabled, A - active, D - dynamic,
    C - connect, S - static, r - rip, b - bgp, o - ospf
    # DST-ADDRESS PREF-SRC G GATEWAY DISTANCE INTERFACE
    0 ADC 10.5.5.0/24 10.5.5.1 clientes
    1 ADC 192.168.1.0/24 192.168.1.253 Link1
    2 ADC 192.168.10.0/24 192.168.10.253 Link2
    3 A S 0.0.0.0/0 r 192.168.1.254 Link1
    4 A S 0.0.0.0/0 r 192.168.10.1 Link2



  5. Vai em IP Route

    Clica no seu segundo link vai em Mark e coloca o nome do seu segundo link ai ja podera funcionar






Tópicos Similares

  1. Balanceamento Links Mesmo gateway
    Por felipezatta no fórum Redes
    Respostas: 5
    Último Post: 27-08-2011, 10:45
  2. Balanceamento link dedicado e adsl
    Por MaxAdriano no fórum Redes
    Respostas: 31
    Último Post: 01-09-2009, 22:30
  3. Load balance 2 links perfeito
    Por itnet no fórum Redes
    Respostas: 7
    Último Post: 07-09-2008, 23:06
  4. Respostas: 24
    Último Post: 23-10-2007, 14:04
  5. Balanceamento - Link dedicado e Adsl da BrT
    Por rfm no fórum Servidores de Rede
    Respostas: 2
    Último Post: 23-10-2005, 21:58

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L