+ Responder ao Tópico



  1. Última edição por wirlei; 05-01-2011 às 07:58.

  2. E veja que tem muita gente que contribui com ele, só é bom porque todos participam.



  3. olá amigos boa tarde a todos.
    estou com um pequeno problema aqui, eu uso balance PCC uso um RB450G
    e 4 adsl funcionando redondinho. montei usando os passos do nosso amigo M4D3.
    agora apareceu um concurso publico e o balace PCC ta barrando o site dele
    alguém poderia mim dar uma ajuda? o endereço do site é http://www.consultarconcursos.com.br

    antecipado meus agradecimentos a todos.

  4. Citação Postado originalmente por dimensaonet Ver Post
    olá amigos boa tarde a todos.
    estou com um pequeno problema aqui, eu uso balance PCC uso um RB450G
    e 4 adsl funcionando redondinho. montei usando os passos do nosso amigo M4D3.
    agora apareceu um concurso publico e o balace PCC ta barrando o site dele
    alguém poderia mim dar uma ajuda? o endereço do site é http://www.consultarconcursos.com.br

    antecipado meus agradecimentos a todos.
    Aqui abriu normal, mas no seu caso vc da um ping pro site, pega o ip dele e poe na lista de loopback do pcc.



  5. bom dia pessoall ..
    to tentando novamente implantar o balance aqui no meu sistema, to usando agora 4 links adsl
    fiz as configurações seguindo o tutorial, inclusive usando o mesmo nome nas interfaces para não me perder, só que apos configurado, quando mando pingar dá o seguinte erro: no route to host

    segue configurações para os amigos se puder me ajudar:
    /interface ethernet
    set 0 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes mac-address=00:E0:52:A7:C0:FE mtu=1500 \
    name=EthLinkA speed=100Mbps
    set 1 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes l2mtu=1600 mac-address=00:E0:52:A9:49:02 \
    mtu=1500 name=EthLinkB speed=100Mbps
    set 2 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes l2mtu=1600 mac-address=00:E0:52:A9:49:7C \
    mtu=1500 name=EthLinkC speed=100Mbps
    set 3 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes l2mtu=1600 mac-address=00:E0:52:AE:34:2B \
    mtu=1500 name=EthLinkD speed=100Mbps
    set 4 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes l2mtu=1600 mac-address=00:15:F2:43:A5:35 \
    mtu=1500 name=EthClientes speed=100Mbps
    /ip address
    add address=192.168.1.101/24 broadcast=192.168.1.255 comment="Link 1 - Modem TpLink1" disabled=no interface=EthLinkA network=192.168.1.0
    add address=192.168.1.102/24 broadcast=192.168.1.255 comment="Link 2 - Modem TpLink2" disabled=no interface=EthLinkB network=192.168.1.0
    add address=10.0.0.251/24 broadcast=10.0.0.255 comment="Link 3 - Modem Intelbras1" disabled=no interface=EthLinkC network=10.0.0.0
    add address=10.0.0.252/24 broadcast=10.0.0.255 comment="Link 4 - Modem Intelbras2" disabled=no interface=EthLinkD network=10.0.0.0
    add address=192.168.100.254/24 broadcast=192.168.100.255 comment="Saida do Link pra Hotspot" disabled=no interface=EthClientes network=192.168.100.0
    /ip firewall nat
    add action=masquerade chain=srcnat comment="MASCARAMENTO PCC" disabled=no \
    out-interface=EthLinkA
    add action=masquerade chain=srcnat comment="" disabled=no out-interface=\
    EthLinkB
    add action=masquerade chain=srcnat comment="" disabled=no out-interface=\
    EthLinkC
    add action=masquerade chain=srcnat comment="" disabled=no out-interface=\
    EthLinkD
    /ip firewall mangle
    add action=accept chain=prerouting comment="SEM BALANCE" disabled=no \
    dst-address-list=sem_balance in-interface=EthClientes
    add action=mark-connection chain=input comment="" connection-state=new \
    disabled=no in-interface=EthLinkA new-connection-mark=conn_na \
    passthrough=yes
    add action=mark-connection chain=input comment="" connection-state=new \
    disabled=no in-interface=EthLinkB new-connection-mark=conn_nb \
    passthrough=yes
    add action=mark-connection chain=input comment="" connection-state=new \
    disabled=no in-interface=EthLinkC new-connection-mark=conn_nc \
    passthrough=yes
    add action=mark-connection chain=input comment="" connection-state=new \
    disabled=no in-interface=EthLinkD new-connection-mark=conn_nd \
    passthrough=yes
    add action=mark-routing chain=output comment="" connection-mark=conn_na \
    disabled=no new-routing-mark=to_ra passthrough=no
    add action=mark-routing chain=output comment="" connection-mark=conn_nb \
    disabled=no new-routing-mark=to_rb passthrough=no
    add action=mark-routing chain=output comment="" connection-mark=conn_nc \
    disabled=no new-routing-mark=to_rc passthrough=no
    add action=mark-routing chain=output comment="" connection-mark=conn_nd \
    disabled=no new-routing-mark=to_rd passthrough=no
    add action=mark-connection chain=prerouting comment="" disabled=no \
    dst-address-type=!local in-interface=EthClientes new-connection-mark=\
    conn_ma0 passthrough=yes per-connection-classifier=both-addresses:4/0
    add action=mark-connection chain=prerouting comment="" disabled=no \
    dst-address-type=!local in-interface=EthClientes new-connection-mark=\
    conn_mb1 passthrough=yes per-connection-classifier=both-addresses:4/1
    add action=mark-connection chain=prerouting comment="" disabled=no \
    dst-address-type=!local in-interface=EthClientes new-connection-mark=\
    conn_mc2 passthrough=yes per-connection-classifier=both-addresses:4/2
    add action=mark-connection chain=prerouting comment="" disabled=no \
    dst-address-type=!local in-interface=EthClientes new-connection-mark=\
    conn_mc2 passthrough=yes per-connection-classifier=both-addresses:4/3
    add action=mark-routing chain=prerouting comment="" connection-mark=conn_ma0 \
    disabled=no in-interface=EthClientes new-routing-mark=to_nra passthrough=\
    no
    add action=mark-routing chain=prerouting comment="" connection-mark=conn_mb1 \
    disabled=no in-interface=EthClientes new-routing-mark=to_nrb passthrough=\
    no
    add action=mark-routing chain=prerouting comment="" connection-mark=conn_mc2 \
    disabled=no in-interface=EthClientes new-routing-mark=to_nrc passthrough=\
    no
    add action=mark-routing chain=prerouting comment="" connection-mark=conn_md3 \
    disabled=no in-interface=EthClientes new-routing-mark=to_nrd passthrough=\
    no
    /ip route
    add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.1.101 routing-mark=to_nra scope=30 target-scope=10
    add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=10.0.0.251 routing-mark=to_nrb scope=30 target-scope=10
    add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.1.102 routing-mark=to_nrc scope=30 target-scope=10
    add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=10.0.0.252 routing-mark=to_nrd scope=30 target-scope=10
    add comment="" disabled=no distance=2 dst-address=0.0.0.0/0 gateway=192.168.1.101 scope=30 target-scope=10
    add comment="" disabled=no distance=3 dst-address=0.0.0.0/0 gateway=192.168.1.102 scope=30 target-scope=10
    add comment="" disabled=no distance=4 dst-address=0.0.0.0/0 gateway=10.0.0.251 scope=30 target-scope=10
    add comment="" disabled=no distance=5 dst-address=0.0.0.0/0 gateway=10.0.0.252 scope=30 target-scope=10
    Agradeço a todos que puder me ajudar ..






Tópicos Similares

  1. Respostas: 12
    Último Post: 15-05-2015, 17:14
  2. Respostas: 6
    Último Post: 08-03-2015, 02:04
  3. Respostas: 2
    Último Post: 18-06-2014, 16:27
  4. Respostas: 273
    Último Post: 20-09-2012, 10:39
  5. duvida sobre link dedicado por balance de operadora
    Por boneco no fórum Servidores de Rede
    Respostas: 13
    Último Post: 05-05-2011, 18:07

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L