Load Balance não funciona

[tarcisiomk10]

galera naum to conseguino balancear 2 links um adsl de 2.5 e um dedicado de 1mb, tentei balancear usando o nth naum funcionou naum sei pq vou postar minhas confs mas se alguem tiver uma ideia ou tiver um tutorial pra mim dar uma olhada eu agradeço... ouvi falar tb de um balanceamento por pcc alguem tem algum material ai pra mim dar uma olhada e tentar configurar aki se naum der o nth... valeu

Ai vao as confs

Firewall mangle
0 chain=prerouting action=mark-routing new-routing-mark=primeira_rota passthrough=no in-interface=Bridge Enlaces connection-mark=primeira
1 chain=prerouting action=mark-connection new-connection-mark=segunda passthrough=yes connection-state=new in-interface=Bridge Enlaces nth=1,1
2 chain=prerouting action=mark-routing new-routing-mark=segunda_rota passthrough=no in-interface=Bridge Enlaces connection-mark=segunda
3 ;;; Usuarios Lista 1 (Address List)
chain=prerouting action=mark-connection new-connection-mark=primeira passthrough=yes connection-state=new src-address-list=Lista1
in-interface=Bridge Enlaces
4 chain=prerouting action=mark-routing new-routing-mark=primeira_rota passthrough=no in-interface=Bridge Enlaces connection-mark=primeira
5 ;;; Usuarios Lista 2 (Address List)
chain=prerouting action=mark-connection new-connection-mark=segunda passthrough=yes connection-state=new src-address-list=Lista2
in-interface=Bridge Enlaces
6 chain=prerouting action=mark-routing new-routing-mark=segunda_rota passthrough=no in-interface=Bridge Enlaces connection-mark=segunda
7 chain=prerouting action=add-src-to-address-list address-list=Lista1 address-list-timeout=1d in-interface=Bridge Enlaces connection-mark=primeira
8 chain=prerouting action=mark-routing new-routing-mark=primeira_rota passthrough=no in-interface=Bridge Enlaces connection-mark=primeira
9 ;;; Usuarios Lista 2 com Nth
chain=prerouting action=mark-connection new-connection-mark=segunda passthrough=yes connection-state=new in-interface=Bridge Enlaces nth=1,1
10 chain=prerouting action=add-src-to-address-list address-list=Lista2 address-list-timeout=1d in-interface=Bridge Enlaces connection-mark=segunda
11 chain=prerouting action=mark-routing new-routing-mark=segunda_rota passthrough=no in-interface=Bridge Enlaces connection-mark=segunda

Firewall Nat
0 X ;;; place hotspot rules here
chain=unused-hs-chain action=passthrough
1 ;;; masquerade hotspot network
chain=srcnat action=masquerade src-address=10.0.0.0/8
2 chain=srcnat action=masquerade src-address=172.51.1.0/24
3 ;;; Balanceamento de Carga
chain=srcnat action=src-nat to-addresses=172.50.1.2 to-ports=0-65535 protocol=tcp connection-mark=primeira
4 chain=srcnat action=src-nat to-addresses=172.50.1.2 to-ports=0-65535 protocol=udp connection-mark=primeira
5 chain=srcnat action=src-nat to-addresses="ip link dedicado" to-ports=0-65535 protocol=tcp connection-mark=segunda
6 chain=srcnat action=src-nat to-addresses="ip link dedicado" to-ports=0-65535 protocol=udp connection-mark=segunda
7 ;;; Balanceamento de Carga (List_Wan1)
chain=srcnat action=src-nat to-addresses=172.50.1.2 to-ports=0-65535 protocol=tcp connection-mark=primeira
8 chain=srcnat action=src-nat to-addresses=172.50.1.2 to-ports=0-65535 protocol=udp connection-mark=primeira
9 ;;; Balanceamento de Carga (List_Wan2)
chain=srcnat action=src-nat to-addresses="ip link dedicado" to-ports=0-65535 protocol=tcp connection-mark=segunda
10 chain=srcnat action=src-nat to-addresses="ip link dedicado" to-ports=0-65535 protocol=udp connection-mark=segunda

Ip Route
0 A S 0.0.0.0/0 reachable 172.50.1.1 1 Link 1
1 A S 0.0.0.0/0 reachable "ip link dedicado" 1 Link 2
2 A S 0.0.0.0/0 reachable 172.50.1.1 1 Link 1


com isso ele sempre sai pela rota default.

se alguem puder ajudar valeu.

[scinfovirtual]

Amigo...tem muito material no forum sobre isso.....use a ferramente pesquisar que vai encontrar alguma dica que lhe ajudara....aqui tem um balance de links

https://under-linux.org/f132956-load...os-e-msn-100-a

[Microwave]

Voce está no caminho mas suas regras estão desordenadas e as marcações incorretas. De preferencia a trabalhar como ADSL em modo Bridge, terá melhor aproveitamento deste link.

---------------------------------------------
João Paulo Saldanha
Microwave | Gerente de Suporte/Engenharia
http://www.microwavetec.com.br - Distribuidor Oficial Mikrotik
Tel.: (31)3267-9500
Problemas com sua rede ou provedor? Conheça o Suporte e Consultoria da Microwave, todas as respostas num só lugar.