Problemas Com Cachefull e Controle de banda

[lrmurad]

Pessoal, to tentando implantaar o cache full aqui mas to com um problema. Ele até funciona se eu desativar o controle de banda individual (simple queues). Quanto ativo, mesmo quando o cliente baixa do cache não sai a full, mas sim na velocidade do cliente.
Vou postar minhas fegras abaixo, pra ver se alguém me da uma luz.

[IMG]file:///C:/DOCUME%7E1/luis/CONFIG%7E1/Temp/moz-screenshot.png[/IMG]/ip firewall mangle
;;; Cache Full_regra 2
chain=postrouting action=mark-connection new-connection-mark=proxy-hits passthrough=yes protocol=tcp src-port=5128 dscp=12

1 ;;; Cache Full_regra 2
chain=postrouting action=mark-connection new-connection-mark=sem-proxy-hits passthrough=yes protocol=tcp src-port=5128 dscp=!12

2 chain=postrouting action=mark-packet new-packet-mark=proxy-squid passthrough=no connection-mark=proxy-hits

3 ;;; Cache Full
chain=postrouting action=mark-connection new-connection-mark=squid-connection-HIT passthrough=yes protocol=tcp src-port=5128 content=THUNDER: HIT (essa regra naum tá marcando nada)

4 ;;; Cache Full
chain=postrouting action=mark-connection new-connection-mark=squid-connection-HIT passthrough=yes protocol=tcp src-port=5128 content=X-Cache: HIT

5 chain=postrouting action=mark-packet new-packet-mark=squid-packet-HIT passthrough=yes connection-mark=squid-connection-HIT

/queue type
name="cache" kind=pcq pcq-rate=4800000 pcq-limit=50 pcq-classifier=dst-address pcq-total-limit=2000

/queue tree
name="squid packets" parent=global-out packet-mark=squid-packet-HIT limit-at=0 queue=cache priority=8 max-limit=0 burst-limit=0 burst-threshold=0
burst-time=0s

7 name="SquidCache_Down" parent=global-out packet-mark=proxy-squid limit-at=0 queue=cache priority=8 max-limit=0 burst-limit=0 burst-threshold=0
burst-time=0s

8 name="SquidCache_Up" parent=global-in packet-mark=proxy-squid limit-at=0 queue=cache priority=8 max-limit=0 burst-limit=0 burst-threshold=0 burst-time=0s

Desde já agradeço.

[rps67]

content = X-Cache: HIT from Thunder

Mude ae e nos retorne o resultado.

[lrmurad]

Blz, ta marcando. Mas o problema de sair a full continua.
Só sai a full se eu desativo a simple queue do IP.

[lrmurad]

A queue tree não tem prioridade sobre a simple queue?