+ Responder ao Tópico



  1. o contrack ta automatico, a rb ta toda atualizada (firm e soft)

    no balance tenho a seguinte estrutura:

    porta 2,3 e 4 = adsl 50megas

    porta 5 = link dedicado 25megas

    essas sao minhas configuraçoes:

    /ip firewall mangle




    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-list=LINK0 in-interface=PCC new-connection-mark=Sites0


    add action=mark-routing chain=prerouting connection-mark=Sites0 in-interface=\
    PCC new-routing-mark=Rota0 passthrough=no


    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-list=LINK1 in-interface=PCC new-connection-mark=Sites1


    add action=mark-routing chain=prerouting connection-mark=Sites1 in-interface=\
    PCC new-routing-mark=Rota1 passthrough=no


    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-list=LINK2 in-interface=PCC new-connection-mark=Sites2


    add action=mark-routing chain=prerouting connection-mark=Sites2 in-interface=\
    PCC new-routing-mark=Rota2 passthrough=no


    -----------------------------------------------------------------------------------------------




    add chain=prerouting comment="FORA DO LOADBALACED" dst-address-list=loopback \
    in-interface=PCC




    add action=mark-connection chain=prerouting connection-state=new in-interface=\
    ether5 new-connection-mark=ether5_conn


    add action=mark-connection chain=prerouting connection-state=new in-interface=\
    adsl_ether2 new-connection-mark=adsl_ether2_conn


    add action=mark-connection chain=prerouting connection-state=new in-interface=\
    adsl_ether3 new-connection-mark=adsl_ether3_conn


    add action=mark-connection chain=prerouting connection-state=new in-interface=\
    adsl_ether4 new-connection-mark=adsl_ether4_conn


    add action=mark-routing chain=output connection-mark=ether5_conn \
    new-routing-mark=to_ether5


    add action=mark-routing chain=output connection-mark=adsl_ether2_conn \
    new-routing-mark=to_adsl_ether2


    add action=mark-routing chain=output connection-mark=adsl_ether3_conn \
    new-routing-mark=to_adsl_ether3


    add action=mark-routing chain=output connection-mark=adsl_ether4_conn \
    new-routing-mark=to_adsl_ether4


    add chain=prerouting dst-address=189.59.78.152/29 in-interface=PCC


    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-type=!local in-interface=PCC new-connection-mark=ether5_conn \
    per-connection-classifier=both-addresses-and-ports:7/0


    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-type=!local in-interface=PCC new-connection-mark=\
    adsl_ether2_conn per-connection-classifier=both-addresses-and-ports:7/1


    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-type=!local in-interface=PCC new-connection-mark=\
    adsl_ether2_conn per-connection-classifier=both-addresses-and-ports:7/2


    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-type=!local in-interface=PCC new-connection-mark=\
    adsl_ether3_conn per-connection-classifier=both-addresses-and-ports:7/3


    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-type=!local in-interface=PCC new-connection-mark=\
    adsl_ether3_conn per-connection-classifier=both-addresses-and-ports:7/4


    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-type=!local in-interface=PCC new-connection-mark=\
    adsl_ether4_conn per-connection-classifier=both-addresses-and-ports:7/5


    add action=mark-connection chain=prerouting connection-state=new \
    dst-address-type=!local in-interface=PCC new-connection-mark=\
    adsl_ether4_conn per-connection-classifier=both-addresses-and-ports:7/6


    add action=mark-routing chain=prerouting connection-mark=ether5_conn \
    in-interface=PCC new-routing-mark=to_ether5


    add action=mark-routing chain=prerouting connection-mark=adsl_ether2_conn \
    in-interface=PCC new-routing-mark=to_adsl_ether2


    add action=mark-routing chain=prerouting connection-mark=adsl_ether3_conn \
    in-interface=PCC new-routing-mark=to_adsl_ether3


    add action=mark-routing chain=prerouting connection-mark=adsl_ether4_conn \
    in-interface=PCC new-routing-mark=to_adsl_ether4


    /ip route


    add distance=1 gateway=189.59.78.153 routing-mark=Rota0
    add distance=1 gateway=adsl_ether2 routing-mark=Rota1
    add distance=1 gateway=adsl_ether3 routing-mark=Rota2


    add check-gateway=ping comment=Link0 distance=1 gateway=189.59.78.153 \
    routing-mark=to_ether5


    add comment=Link1 distance=1 gateway=adsl_ether2 routing-mark=to_adsl_ether2
    add comment=Link2 distance=1 gateway=adsl_ether3 routing-mark=to_adsl_ether3
    add comment=Link3 distance=1 gateway=adsl_ether4 routing-mark=to_adsl_ether4
    add check-gateway=ping comment=Link0 distance=1 gateway=189.59.78.153
    add comment=Link1 distance=2 gateway=adsl_ether2
    add comment=Link2 distance=3 gateway=adsl_ether3
    add comment=Link3 distance=4 gateway=adsl_ether4


    /ip firewall address-list
    add address=200.155.80.0-200.155.255.255 list=loopback
    add address=200.220.186.0/24 list=loopback
    add address=200.220.178.0/24 list=loopback
    add address=200.159.128.0/24 list=loopback
    add address=200.155.0.0/16 list=loopback
    add address=201.7.176.0/20 list=loopback
    add address=201.7.178.0/24 list=loopback
    add address=201.7.180.0/24 list=loopback
    add address=201.7.0.0/16 list=loopback
    add address=201.30.0.0/16 list=loopback
    add address=186.192.0.0/16 list=loopback
    add address=200.201.174.0/24 list=loopback
    add address=200.201.173.0/24 list=loopback
    add address=10.10.30.0/24 list=loopback
    add address=200.155.80.0-200.155.255.255 comment=BRADESCO list=LINK0
    add address=200.220.186.0/24 list=LINK0
    add address=200.220.178.0/24 list=LINK0
    add address=64.38.29.0/24 comment=RapidShare list=LINK1
    add address=208.69.32.0/24 list=LINK1
    add address=208.67.217.0/24 list=LINK1
    add address=201.7.178.0/24 list=LINK1
    add address=201.7.176.0/24 list=LINK1
    add address=201.7.176.0/20 comment="Vdeos - Globo" list=LINK2
    add address=208.84.247.0/24 comment="Vdeos - terratv" list=LINK2
    add address=200.154.56.0/24 comment="Vdeos - terratv" list=LINK2
    add address=64.38.29.0/24 comment=RapidShare list=loopback
    add address=208.69.32.0/24 list=loopback
    add address=208.67.217.0/24 list=loopback
    add address=201.7.176.0/24 list=loopback
    add address=208.84.247.0/24 comment="Vdeos - terratv" list=loopback
    add address=200.154.56.0/24 comment="Vdeos - terratv" list=loopback
    add address=200.201.160.0/24 comment="Caixa Economica Federal" list=loopback
    add address=200.201.166.0/24 list=loopback
    add address=200.141.207.3 comment=Detran list=loopback
    add address=138.91.0.0/16 list=loopback
    add address=161.148.0.0/16 comment="Receita Feredal" list=loopback
    add address=186.234.0.0/16 comment=Uol list=loopback
    add address=201.48.0.0/17 comment=UniUbe list=loopback
    add address=199.67.0.0/16 comment=Credcard list=loopback
    add address=198.41.128.0/18 comment=megafilmes list=LINK2
    add address=198.41.184.0/21 comment=megafilmes list=LINK2
    add address=198.41.184.0/21 comment=megafilmes disabled=yes list=loopback
    add address=198.41.128.0/18 comment=megafilmes disabled=yes list=loopback

    ja vi e revi varias vezes , mas nao consigo enxergar o problema, muitos outros sites saem do balance, mas alguns video nao, se alguem puder me dar uma luz fico agradecido, obrigado.

  2. Os ips dos clientes chegam até a RB?



  3. Amigo qual é o site? postar aí.

  4. Isso é seu ballance que só falta uma configuraçãozinha...



  5. Citação Postado originalmente por AndrioPJ Ver Post
    Os ips dos clientes chegam até a RB?
    do balance mando o link para as torres onde tem rbs que autenticam os clientes pppoe






Tópicos Similares

  1. Rede PLC/BPL sai do papel ou não?
    Por edmarmega no fórum Redes
    Respostas: 4
    Último Post: 16-06-2011, 10:25
  2. RB450 web-proxy não sai do "stopped"
    Por RinaldoVaz no fórum Redes
    Respostas: 1
    Último Post: 31-08-2009, 14:39
  3. Drive do modem PCTEL não funciona
    Por ricardinhomattar no fórum Servidores de Rede
    Respostas: 4
    Último Post: 05-10-2003, 17:18
  4. linux não recebe ip do modem.
    Por Zayfer no fórum Servidores de Rede
    Respostas: 3
    Último Post: 10-07-2003, 11:54
  5. Respostas: 6
    Último Post: 01-08-2002, 09:39

Visite: BR-Linux ·  VivaOLinux ·  Dicas-L