+ Responder ao Tópico



  1. #1
    BrunoPiaui
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Fala galera!!! <IMG SRC="images/forum/icons/icon21.gif">

    Eu jã instalei o apache+php+mysql+mod_ssl+openssl e tã tudo funcionando redondinho!!!!!

    O problema &acute;e que eu queria saber como faco para criar uma p&acute;agina de teste ou um diret&acute;orio que faca aparecer aquele cadeado fechado no navegador indicando um site seguro??????????

    Ajudando ou nao, muito obrigado!!!!

    Bruno Piaui <IMG SRC="images/forum/icons/icon27.gif"> <IMG SRC="images/forum/icons/icon27.gif"> <IMG SRC="images/forum/icons/icon27.gif"> <IMG SRC="images/forum/icons/icon27.gif"> <IMG SRC="images/forum/icons/icon27.gif">

  2. #2

    Padrão Cadeado FECHADO!!!!!!!!!

    eh soh criar uma pagina index.html dentro da sua pasta https no meu caso fica em
    /var/www/https/

    ai vc chama ela pelo browser

  3. #3
    BrunoPiaui
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Fala brother!!!

    A minha instalacao do apache foi toda no diretorio /servidor/apache

    vc sabe onde poderia estar esse diretorio ?????????

    Obrigado!

  4. #4
    BrunoPiaui
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Fala brother!!!

    A minha instalacao do apache foi toda no diretorio /servidor/apache

    vc sabe onde poderia estar esse diretorio ?????????

    Obrigado!

  5. #5
    AndrewAmorimdaSilva
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Kro colega,

    O apache pode ter sido instalado em qualquer diretório, mas o path para os arquivos do seu site, você define no arquivo httpd.conf que fica normalmente no /etc/ ok !

    Verifique a linha e veja onde está o path dos aquivos do seu dsite ok, normalmente fica em /var/www/http/

    Espero ter ajudado.
    Um Abraço!! <IMG SRC="images/forum/icons/icon21.gif">

  6. #6
    BrunoPiaui
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Eu sei meu amigo!!!

    Mas o diretorio que o 1c3_m4n disse era um tal de https!

    Nao sei se tem um diretorio para o http normal e o http com ssl...

    Mas obrigado!

  7. #7
    BrunoPiaui
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Sera que eu tenho que configurar no httpd.conf o caminho do diretorio seguro????????????????????

    Se for em que parte coloco???????????

  8. #8
    AndrewAmorimdaSilva
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Faça o seguinte, adicione este esquema aqui!!

    # Server Certificate:
    # Point SSLCertificateFile at a PEM encoded certificate. If
    # the certificate is encrypted, then you will be prompted for a
    # pass phrase. Note that a kill -HUP will prompt again. A test
    # certificate can be generated with `make certificate&acute; under
    # built time. Keep in mind that if you&acute;ve both a RSA and a DSA
    # certificate you can configure both in parallel (to also allow
    # the use of DSA ciphers, etc.)
    SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt
    #SSLCertificateFile /etc/httpd/conf/ssl.crt/server-dsa.crt

    # Server Private Key:
    # If the key is not combined with the certificate, use this
    # directive to point at the key file. Keep in mind that if
    # you&acute;ve both a RSA and a DSA private key you can configure
    # both in parallel (to also allow the use of DSA ciphers, etc.)
    SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key



    Note as linhas:

    SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt (verifique o diretório)

    SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key (verifique o diretório)

    Depois disso entre com as linhas:

    <Files ~ "\.(cgi|shtml|phtml|php3?)$">
    SSLOptions +StdEnvVars
    </Files>
    <Directory "/var/www/cgi-bin">
    SSLOptions +StdEnvVars
    </Directory>

    se não funcionar, mude o dirétio para /var/www/html

    Blz......um abraço!!!

    Se funcionar avise ok!!!
    <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_wink.gif">

  9. #9
    Valhalla
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Crie uma página index.htm e coloque em seu diretório web no navegador digite https://www.dominio.com.br/index.htm e veja se funciona.

  10. #10
    BrunoPiaui
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Po galera <IMG SRC="images/forum/icons/icon_frown.gif"> <IMG SRC="images/forum/icons/icon_frown.gif"> nao consegui!!!

    Se nao for abuso da minha parte, alguem poderia mandar-me um email (<A HREF="mailto:[email protected]">[email protected]</A>) mostrando como compilar o apache e o openssl com o mod_ssl no slackware 8.1 e um teste que apareca o cadeado fechado no navegador????

    Se puderem, obrigado!!!!!!!!!!!!

    E obrigado tb se nao puderem!!!!!!!!!!!

    Valeu p/ o pessoal do furum que tentou me ajudar!!!!!!!!!!!!

    Bruno Piaui

  11. #11
    Valhalla
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    De uma olhada neste tutorial que fiz https://under-linux.org/modules.php?name=Sections&op=viewarticle&artid=135 depois de instalado sem criar nada execute no navegador https://www.seudominio.com.br ou https://seuIP
    e veja o cadeado fechado

  12. #12
    BrunoPiaui
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Pessoal,
    to tentando iniciar o apache (./apachectl startssl) e tá dando o seguinte erro:

    Cannot add module via name &acute;mod_ssl.c&acute;=not in list of loaded modules.
    ./apachectl startssl: http coud not be started.

    Alguém sabe o que tá acontecendo???????

    Valeu!!!!!!!!!


  13. #13
    AndrewAmorimdaSilva
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    no httpd.conf, verifique se esta linha está carregando o modulo:

    <IfDefine HAVE_SSL>
    LoadModule ssl_module modules/libssl.so

    Se não, adicione ela ok! <IMG SRC="images/forum/icons/icon_wink.gif">

  14. #14
    AndrewAmorimdaSilva
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Se tiver descomente, e verifique se o modulo libssl.so está no diretorio modules ok.


    TEnta aí.. <IMG SRC="images/forum/icons/icon_wink.gif">

  15. #15
    AndrewAmorimdaSilva
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Se não tiver, adicione esta linha tb ok!

    <IfDefine HAVE_SSL>
    AddModule mod_ssl.c

    Ou melhor,se quiser, é claro, mande seu httpd.conf [email protected] ou poste aqui ok?
    <IMG SRC="images/forum/icons/icon_wink.gif">

  16. #16
    BrunoPiaui
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    brother, e justamente nessa linha que ta dando o erro

    e ta desse jeito!!!!!

    esse aqui e o meu httpd.conf (nao tem problema pq esse conf e so p/ testes):

    ##
    ## httpd.conf -- Apache HTTP server configuration file
    ##

    #
    # Based upon the NCSA server configuration files originally by Rob McCool.
    #
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do. They&acute;re here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    #
    # After this file is processed, the server will look for and process
    # /servidor/apache/conf/srm.conf and then /servidor/apache/conf/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    #
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the &acute;global environment&acute.
    # 2. Directives that define the parameters of the &acute;main&acute; or &acute;default&acute; server,
    # which responds to requests that aren&acute;t handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server&acute;s control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache" will be interpreted by the
    # server as "/usr/local/apache/logs/foo.log".
    #

    ### Section 1: Global Environment
    #
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    #

    #
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    #
    ServerType standalone

    #
    # ServerRoot: The top of the directory tree under which the server&acute;s
    # configuration, error, and log files are kept.
    #
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation
    # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile&gt<IMG SRC="images/forum/icons/icon_wink.gif">;
    # you will save yourself a lot of trouble.
    #
    ServerRoot "/servidor/apache"

    #
    # The LockFile directive sets the path to the lockfile used when Apache
    # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
    # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
    # its default value. The main reason for changing it is if the logs
    # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
    # DISK. The PID of the main server process is automatically appended to
    # the filename.
    #
    #LockFile /servidor/apache/logs/httpd.lock

    #
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    #
    PidFile /servidor/apache/logs/httpd.pid

    #
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you&acute;ll know because
    # this file will be created when you run Apache) then you *must* ensure that
    # no two invocations of Apache share the same scoreboard file.
    #
    ScoreBoardFile /servidor/apache/logs/httpd.scoreboard

    #
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf

    #
    # Timeout: The number of seconds before receives and sends time out.
    #
    Timeout 300

    #
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    #
    KeepAlive On

    #
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    #
    MaxKeepAliveRequests 100

    #
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    #
    KeepAliveTimeout 15

    #
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    #
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    #
    MinSpareServers 5
    MaxSpareServers 10

    #
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    #
    StartServers 5

    #
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #
    MaxClients 150

    #
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn&acute;t really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    #
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    #
    MaxRequestsPerChild 0

    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #
    #Listen 3000
    #Listen 12.34.56.78:80

    #
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #
    #BindAddress *

    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule&acute; lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Please read the file http://httpd.apache.org/docs/dso.html for more
    # details about the DSO mechanism and run `httpd -l&acute; for the list of already
    # built-in (statically linked and thus always available) modules in your httpd
    # binary.
    #
    # Note: The order in which modules are loaded is important. Don&acute;t change
    # the order below without expert advice.
    #
    # Example:
    # LoadModule foo_module libexec/mod_foo.so
    LoadModule rewrite_module libexec/mod_rewrite.so
    LoadModule proxy_module libexec/libproxy.so

    # Reconstruction of the complete module list from all available modules
    # (static and shared ones) to achieve correct module execution order.
    # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
    ClearModuleList
    AddModule mod_env.c
    AddModule mod_log_config.c
    AddModule mod_mime.c
    AddModule mod_negotiation.c
    AddModule mod_status.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_rewrite.c
    AddModule mod_access.c
    AddModule mod_auth.c
    AddModule mod_proxy.c
    AddModule mod_so.c
    AddModule mod_setenvif.c
    <IfDefine SSL>
    AddModule mod_ssl.c
    </IfDefine>
    AddModule mod_php4.c

    #
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #
    #ExtendedStatus On

    ### Section 2: &acute;Main&acute; server configuration
    #
    # The directives in this section set up the values used by the &acute;main&acute;
    # server, which responds to any requests that aren&acute;t handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #

    #
    # If your ServerType directive (set earlier in the &acute;Global Environment&acute;
    # section) is set to "inetd", the next few directives don&acute;t have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    #

    #
    # Port: The port to which the standalone server listens. For
    # ports < 1023, you will need httpd to be run as root initially.
    #
    Port 80

    ##
    ## SSL Support
    ##
    ## When we also provide SSL we have to listen to the
    ## standard HTTP port (see above) and to the HTTPS port
    ##
    <IfDefine SSL>
    Listen 443
    Listen 80
    </IfDefine>

    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    #
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don&acute;t use Group nobody on these systems!
    #
    User nobody
    Group nobody

    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    #
    ServerAdmin [email protected]

    #
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it&acute;s different than the one the program would get (i.e., use
    # "www" instead of the host&acute;s real name).
    #
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don&acute;t understand
    # this, ask your network administrator.
    # If your host doesn&acute;t have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    #
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    #
    #ServerName bruno.example.net

    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "/servidor/apache/htdocs"

    #
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    #
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    #
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>

    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something&acute;s not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #

    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory "/servidor/apache/htdocs">

    #
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn&acute;t give it to you.
    #
    Options Indexes FollowSymLinks MultiViews

    #
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all
    </Directory>

    #
    # UserDir: The name of the directory which is appended onto a user&acute;s home
    # directory if a ~user request is received.
    #
    <IfModule mod_userdir.c>
    UserDir public_html
    </IfModule>

    #
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>

    #
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    #
    <IfModule mod_dir.c>
    DirectoryIndex index.html index.htm index.php index.php3 index.shtml
    </IfModule>

    #
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    #
    AccessFileName .htaccess

    #
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    #
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    #
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>

    #
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #
    #CacheNegotiatedDocs

    #
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname<IMG SRC="images/forum/icons/icon_razz.gif">ort that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    #
    UseCanonicalName On

    #
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    #
    <IfModule mod_mime.c>
    TypesConfig /servidor/apache/conf/mime.types
    </IfModule>

    #
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain

    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the &acute;Global
    # Environment&acute; section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it&acute;s enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    #
    <IfModule mod_mime_magic.c>
    MIMEMagicFile /servidor/apache/conf/magic
    </IfModule>

    #
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it&acute;d be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    #
    HostnameLookups Off

    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host&acute;s errors will be logged there and not here.
    #
    ErrorLog /servidor/apache/logs/error_log

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog /servidor/apache/logs/access_log common

    #
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #
    #CustomLog /servidor/apache/logs/referer_log referer
    #CustomLog /servidor/apache/logs/agent_log agent

    #
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog /servidor/apache/logs/access_log combined

    #
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    #
    ServerSignature On

    # EBCDIC configuration:
    # (only for mainframes using the EBCDIC codeset, currently one of:
    # Fujitsu-Siemens&acute; BS2000/OSD, IBM&acute;s OS/390 and IBM&acute;s TPF)!!
    # The following default configuration assumes that "text files"
    # are stored in EBCDIC (so that you can operate on them using the
    # normal POSIX tools like grep and sort) while "binary files" are
    # stored with identical octets as on an ASCII machine.
    #
    # The directives are evaluated in configuration file order, with
    # the EBCDICConvert directives applied before EBCDICConvertByType.
    #
    # If you want to have ASCII HTML documents and EBCDIC HTML documents
    # at the same time, you can use the file extension to force
    # conversion off for the ASCII documents:
    # > AddType text/html .ahtml
    # > EBCDICConvert Off=InOut .ahtml
    #
    # EBCDICConvertByType On=InOut text/* message/* multipart/*
    # EBCDICConvertByType On=In application/x-www-form-urlencoded
    # EBCDICConvertByType On=InOut application/postscript model/vrml
    # EBCDICConvertByType Off=InOut */*


    #
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    #
    <IfModule mod_alias.c>

    #
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn&acute;t aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    #
    Alias /icons/ "/servidor/apache/icons/"

    <Directory "/servidor/apache/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>

    # This Alias will project the on-line documentation tree under /manual/
    # even if you change the DocumentRoot. Comment it if you don&acute;t want to
    # provide access to the on-line documentation.
    #
    Alias /manual/ "/servidor/apache/htdocs/manual/"

    <Directory "/servidor/apache/htdocs/manual">
    Options Indexes FollowSymlinks MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    #
    ScriptAlias /cgi-bin/ "/servidor/apache/cgi-bin/"

    #
    # "/servidor/apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "/servidor/apache/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>

    </IfModule>
    # End of aliases.

    #
    # Redirect allows you to tell clients about documents which used to exist in
    # your server&acute;s namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    #

    #
    # Directives controlling the display of server-generated directory listings.
    #
    <IfModule mod_autoindex.c>

    #
    # FancyIndexing is whether you want fancy directory indexing or standard
    #
    IndexOptions FancyIndexing

    #
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    #
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*

    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core

    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^

    #
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    #
    DefaultIcon /icons/unknown.gif

    #
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz

    #
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    #
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    #
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn&acute;t exist, the server will then look for name.txt and include
    # it as plaintext if found.
    #
    ReadmeName README
    HeaderName HEADER

    #
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    #
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

    </IfModule>
    # End of indexing directives.

    #
    # Document types.
    #
    <IfModule mod_mime.c>

    #
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    #
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz

    #
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    #
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    #
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character &acute;Language&acute; abbreviation is not
    # identical to the two character &acute;Country&acute; code for its country,
    # E.g. &acute;Danmark/dk&acute; versus &acute;Danish/da&acute;.
    #
    # Note 3: In the case of &acute;ltz&acute; we violate the RFC by using a three char
    # specifier. But there is &acute;work in progress&acute; to fix this and get
    # the reference data for rfc1766 cleaned up.
    #
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    #
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .sv
    AddLanguage cz .cz
    AddLanguage ru .ru
    AddLanguage zh-tw .tw
    AddLanguage tw .tw
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8

    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    #
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    #
    <IfModule mod_negotiation.c>
    LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
    </IfModule>

    #
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    #
    AddType application/x-tar .tgz
    AddType image/x-icon .ico

    #
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    #
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    #
    # To use CGI scripts:
    #
    #AddHandler cgi-script .cgi

    #
    # To use server-parsed HTML files
    #
    AddType text/html .shtml
    AddHandler server-parsed .shtml

    #
    # Uncomment the following line to enable Apache&acute;s send-asis HTTP file
    # feature
    #
    #AddHandler send-as-is asis

    #
    # If you wish to use server-parsed imagemap files, use
    #
    #AddHandler imap-file map

    #
    # To enable type maps, you might want to use
    #
    #AddHandler type-map var

    </IfModule>
    # End of document types.

    #
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    #

    #
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #
    #MetaDir .web

    #
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #
    #MetaSuffix .meta

    #
    # Customizable error response (Apache style)
    # these come in three flavors
    #
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (&quot<IMG SRC="images/forum/icons/icon_wink.gif"> marks it as text, it does not get output
    #
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    #
    # 3) external redirects
    #ErrorDocument 402 http://some.other-server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will *not* be available to such a script.

    #
    # Customize behaviour based on the browser
    #
    <IfModule mod_setenvif.c>

    #
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    #
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0

    #
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    #
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0

    </IfModule>
    # End of browser customization directives

    #
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your-domain.com" to match your domain to enable.
    #
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>

    #
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your-domain.com" to match your domain to enable.
    #
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>

    #
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>

    #
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #
    #<IfModule mod_proxy.c>
    # ProxyRequests On

    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    # </Directory>

    #
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #
    # ProxyVia On

    #
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    #
    # CacheRoot "/servidor/apache/proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a-domain.com another-domain.edu joes.garage-sale.com

    #</IfModule>
    # End of proxy directives.

    ### Section 3: Virtual Hosts
    #
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn&acute;t need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    #
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    #
    # You may use the command line option &acute;-S&acute; to verify your virtual host
    # configuration.

    #
    # Use name-based virtual hosting.
    #
    #NameVirtualHost *

    #
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #
    #<VirtualHost *>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>

    #<VirtualHost _default_:*>
    #</VirtualHost>

    ##
    ## SSL Global Context
    ##
    ## All SSL configuration in this context applies both to
    ## the main server and all SSL-enabled virtual hosts.
    ##

    #
    # Some MIME-types for downloading Certificates and CRLs
    #
    <IfDefine SSL>
    AddType application/x-x509-ca-cert .crt
    AddType application/x-pkcs7-crl .crl
    </IfDefine>

    <IfModule mod_ssl.c>

    # Pass Phrase Dialog:
    # Configure the pass phrase gathering process.
    # The filtering dialog program (`builtin&acute; is a internal
    # terminal dialog) has to provide the pass phrase on stdout.
    SSLPassPhraseDialog builtin

    # Inter-Process Session Cache:
    # Configure the SSL Session Cache: First the mechanism
    # to use and second the expiring timeout (in seconds).
    #SSLSessionCache none
    #SSLSessionCache shmht:/servidor/apache/logs/ssl_scache(512000)
    #SSLSessionCache shmcb:/servidor/apache/logs/ssl_scache(512000)
    SSLSessionCache dbm:/servidor/apache/logs/ssl_scache
    SSLSessionCacheTimeout 300

    # Semaphore:
    # Configure the path to the mutual exclusion semaphore the
    # SSL engine uses internally for inter-process synchronization.
    SSLMutex file:/servidor/apache/logs/ssl_mutex

    # Pseudo Random Number Generator (PRNG):
    # Configure one or more sources to seed the PRNG of the
    # SSL library. The seed data should be of good random quality.
    # WARNING! On some platforms /dev/random blocks if not enough entropy
    # is available. This means you then cannot use the /dev/random device
    # because it would lead to very long connection times (as long as
    # it requires to make more entropy available). But usually those
    # platforms additionally provide a /dev/urandom device which doesn&acute;t
    # block. So, if available, use this one instead. Read the mod_ssl User
    # Manual for more details.
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    #SSLRandomSeed startup file:/dev/random 512
    #SSLRandomSeed startup file:/dev/urandom 512
    #SSLRandomSeed connect file:/dev/random 512
    #SSLRandomSeed connect file:/dev/urandom 512

    # Logging:
    # The home of the dedicated SSL protocol logfile. Errors are
    # additionally duplicated in the general error log file. Put
    # this somewhere where it cannot be used for symlink attacks on
    # a real server (i.e. somewhere where only root can write).
    # Log levels are (ascending order: higher ones include lower ones):
    # none, error, warn, info, trace, debug.
    SSLLog /servidor/apache/logs/ssl_engine_log
    SSLLogLevel info

    </IfModule>

    <IfDefine SSL>

    ##
    ## SSL Virtual Host Context
    ##

    <VirtualHost _default_:443>

    # General setup for the virtual host
    DocumentRoot "/servidor/apache/htdocs"
    ServerName bruno.example.net
    ServerAdmin [email protected]
    ErrorLog /servidor/apache/logs/error_log
    TransferLog /servidor/apache/logs/access_log

    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on

    # SSL Cipher Suite:
    # List the ciphers that the client is permitted to negotiate.
    # See the mod_ssl documentation for a complete list.
    SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

    # Server Certificate:
    # Point SSLCertificateFile at a PEM encoded certificate. If
    # the certificate is encrypted, then you will be prompted for a
    # pass phrase. Note that a kill -HUP will prompt again. A test
    # certificate can be generated with `make certificate&acute; under
    # built time. Keep in mind that if you&acute;ve both a RSA and a DSA
    # certificate you can configure both in parallel (to also allow
    # the use of DSA ciphers, etc.)
    SSLCertificateFile /servidor/apache/conf/ssl.crt/server.crt
    #SSLCertificateFile /servidor/apache/conf/ssl.crt/server-dsa.crt

    # Server Private Key:
    # If the key is not combined with the certificate, use this
    # directive to point at the key file. Keep in mind that if
    # you&acute;ve both a RSA and a DSA private key you can configure
    # both in parallel (to also allow the use of DSA ciphers, etc.)
    SSLCertificateKeyFile /servidor/apache/conf/ssl.key/server.key
    #SSLCertificateKeyFile /servidor/apache/conf/ssl.key/server-dsa.key

    # Server Certificate Chain:
    # Point SSLCertificateChainFile at a file containing the
    # concatenation of PEM encoded CA certificates which form the
    # certificate chain for the server certificate. Alternatively
    # the referenced file can be the same as SSLCertificateFile
    # when the CA certificates are directly appended to the server
    # certificate for convinience.
    #SSLCertificateChainFile /servidor/apache/conf/ssl.crt/ca.crt

    # Certificate Authority (CA):
    # Set the CA certificate verification path where to find CA
    # certificates for client authentication or alternatively one
    # huge file containing all of them (file must be PEM encoded)
    # Note: Inside SSLCACertificatePath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCACertificatePath /servidor/apache/conf/ssl.crt
    #SSLCACertificateFile /servidor/apache/conf/ssl.crt/ca-bundle.crt

    # Certificate Revocation Lists (CRL):
    # Set the CA revocation path where to find CA CRLs for client
    # authentication or alternatively one huge file containing all
    # of them (file must be PEM encoded)
    # Note: Inside SSLCARevocationPath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath /servidor/apache/conf/ssl.crl
    #SSLCARevocationFile /servidor/apache/conf/ssl.crl/ca-bundle.crl

    # Client Authentication (Type):
    # Client certificate verification type and depth. Types are
    # none, optional, require and optional_no_ca. Depth is a
    # number which specifies how deeply to verify the certificate
    # issuer chain before deciding the certificate is not valid.
    #SSLVerifyClient require
    #SSLVerifyDepth 10

    # Access Control:
    # With SSLRequire you can do per-directory access control based
    # on arbitrary complex boolean expressions containing server
    # variable checks and other lookup directives. The syntax is a
    # mixture between C and Perl. See the mod_ssl documentation
    # for more details.
    <Location /servidor/apache/htdocs>
    SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
    and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    </Location>

    # SSL Engine Options:
    # Set various options for the SSL engine.
    # o FakeBasicAuth:
    # Translate the client X.509 into a Basic Authorisation. This means that
    # the standard Auth/DBMAuth methods can be used for access control. The
    # user name is the `one line&acute; version of the client&acute;s X.509 certificate.
    # Note that no password is obtained from the user. Every entry in the user
    # file needs this password: `xxj31ZMTZzkVA&acute;.
    # o ExportCertData:
    # This exports two additional environment variables: SSL_CLIENT_CERT and
    # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    # server (always existing) and the client (only existing when client
    # authentication is used). This can be used to import the certificates
    # into CGI scripts.
    # o StdEnvVars:
    # This exports the standard SSL/TLS related `SSL_*&acute; environment variables.
    # Per default this exportation is switched off for performance reasons,
    # because the extraction step is an expensive operation and is usually
    # useless for serving static content. So one usually enables the
    # exportation for CGI and SSI requests only.
    # o CompatEnvVars:
    # This exports obsolete environment variables for backward compatibility
    # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
    # to provide compatibility to existing CGI scripts.
    # o StrictRequire:
    # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    # under a "Satisfy any" situation, i.e. when it applies access is denied
    # and no other module can change it.
    # o OptRenegotiate:
    # This enables optimized SSL connection renegotiation handling when SSL
    # directives are used in per-directory context.
    #SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
    <Files ~ "\.(cgi|shtml|html|phtml|php?)$">
    SSLOptions +StdEnvVars
    </Files>
    <Directory "/servidor/apache/htdocs">
    SSLOptions +StdEnvVars
    </Directory>

    # SSL Protocol Adjustments:
    # The safe and default but still SSL/TLS standard compliant shutdown
    # approach is that mod_ssl sends the close notify alert but doesn&acute;t wait for
    # the close notify alert from client. When you need a different shutdown
    # approach you can use one of the following variables:
    # o ssl-unclean-shutdown:
    # This forces an unclean shutdown when the connection is closed, i.e. no
    # SSL close notify alert is send or allowed to received. This violates
    # the SSL/TLS standard but is needed for some brain-dead browsers. Use
    # this when you receive I/O errors because of the standard approach where
    # mod_ssl sends the close notify alert.
    # o ssl-accurate-shutdown:
    # This forces an accurate shutdown when the connection is closed, i.e. a
    # SSL close notify alert is send and mod_ssl waits for the close notify
    # alert of the client. This is 100% SSL/TLS standard compliant, but in
    # practice often causes hanging connections with brain-dead browsers. Use
    # this only for browsers where you know that their SSL implementation
    # works correctly.
    # Notice: Most problems of broken clients are also related to the HTTP
    # keep-alive facility, so you usually additionally want to disable
    # keep-alive for those clients, too. Use variable "nokeepalive" for this.
    # Similarly, one has to force some clients to use HTTP/1.0 to workaround
    # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
    # "force-response-1.0" for this.
    SetEnvIf User-Agent ".*MSIE.*" \
    nokeepalive ssl-unclean-shutdown \
    downgrade-1.0 force-response-1.0

    # Per-Server Logging:
    # The home of a custom SSL log file. Use this when you want a
    # compact non-error SSL logfile on a virtual host basis.
    CustomLog /servidor/apache/logs/ssl_request_log \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

    </VirtualHost>

    </IfDefine>

    ##################################################

    AddType application/x-httpd-php .php
    LoadModule ssl_module modules/libssl.so

    ##################################################

    Valeu pela ajuda!



  17. #17
    AndrewAmorimdaSilva
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    Fala Kara, faça um backup do httpd.conf seu e substitua por esse...não mude nada ok!!

    Alias, revise , pois você precisa tirar as \ que o frum colocam antes das aspas ok.....qualquer barra antes em uma aspa retire ok!!!!!Se não não vai funcinar, é um erro do forum ok!!!!!



    ##
    ## httpd.conf -- Apache HTTP server configuration file
    ##

    #
    # Based upon the NCSA server configuration files originally by Rob McCool.
    #
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do. They&acute;re here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    #
    # After this file is processed, the server will look for and process
    # /servidor/apache/conf/srm.conf and then /servidor/apache/conf/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    #
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the &acute;global environment&acute.
    # 2. Directives that define the parameters of the &acute;main&acute; or &acute;default&acute; server,
    # which responds to requests that aren&acute;t handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server&acute;s control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache" will be interpreted by the
    # server as "/usr/local/apache/logs/foo.log".
    #

    ### Section 1: Global Environment
    #
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    #

    #
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    #
    ServerType standalone

    #
    # ServerRoot: The top of the directory tree under which the server&acute;s
    # configuration, error, and log files are kept.
    #
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation
    # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>;
    # you will save yourself a lot of trouble.
    #
    ServerRoot "/servidor/apache"

    #
    # The LockFile directive sets the path to the lockfile used when Apache
    # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
    # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
    # its default value. The main reason for changing it is if the logs
    # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
    # DISK. The PID of the main server process is automatically appended to
    # the filename.
    #
    #LockFile /servidor/apache/logs/httpd.lock

    #
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    #
    PidFile /servidor/apache/logs/httpd.pid

    #
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you&acute;ll know because
    # this file will be created when you run Apache) then you *must* ensure that
    # no two invocations of Apache share the same scoreboard file.
    #
    ScoreBoardFile /servidor/apache/logs/httpd.scoreboard

    #
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf

    #
    # Timeout: The number of seconds before receives and sends time out.
    #
    Timeout 300

    #
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    #
    KeepAlive On

    #
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    #
    MaxKeepAliveRequests 100

    #
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    #
    KeepAliveTimeout 15

    #
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    #
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    #
    MinSpareServers 5
    MaxSpareServers 10

    #
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    #
    StartServers 5

    #
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #
    MaxClients 150

    #
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn&acute;t really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    #
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    #
    #MaxRequestsPerChild 0

    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #
    #Listen 3000
    #Listen 12.34.56.78:80

    #
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #
    #BindAddress *

    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule&acute; lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Please read the file http://httpd.apache.org/docs/dso.html for more
    # details about the DSO mechanism and run `httpd -l&acute; for the list of already
    # built-in (statically linked and thus always available) modules in your httpd
    # binary.
    #
    # Note: The order in which modules are loaded is important. Don&acute;t change
    # the order below without expert advice.
    #
    # Example:
    # LoadModule foo_module libexec/mod_foo.so
    LoadModule rewrite_module libexec/mod_rewrite.so
    LoadModule proxy_module libexec/libproxy.so

    # Reconstruction of the complete module list from all available modules
    # (static and shared ones) to achieve correct module execution order.
    # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
    ClearModuleList
    AddModule mod_env.c
    AddModule mod_log_config.c
    AddModule mod_mime.c
    AddModule mod_negotiation.c
    AddModule mod_status.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_rewrite.c
    AddModule mod_access.c
    AddModule mod_auth.c
    AddModule mod_proxy.c
    AddModule mod_so.c
    AddModule mod_setenvif.c
    <IfDefine SSL>
    AddModule mod_ssl.c
    AddModule libssl.so
    <ifDefine Have_SSL>
    LoadModule ssl_module mod_ssl.c
    LoadModule ssl_module libssl.so

    </IfDefine>
    AddModule mod_php4.c

    #
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #
    #ExtendedStatus On

    ### Section 2: &acute;Main&acute; server configuration
    #
    # The directives in this section set up the values used by the &acute;main&acute;
    # server, which responds to any requests that aren&acute;t handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #

    #
    # If your ServerType directive (set earlier in the &acute;Global Environment&acute;
    # section) is set to "inetd", the next few directives don&acute;t have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    #

    #
    # Port: The port to which the standalone server listens. For
    # ports < 1023, you will need httpd to be run as root initially.
    #
    Port 80

    ##
    ## SSL Support
    ##
    ## When we also provide SSL we have to listen to the
    ## standard HTTP port (see above) and to the HTTPS port
    ##
    <IfDefine HAVE_SSL>
    Listen 80
    Listen 443
    </IfDefine>

    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    #
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don&acute;t use Group nobody on these systems!
    #
    User apache
    Group apache

    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    #
    ServerAdmin [email protected]

    #
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it&acute;s different than the one the program would get (i.e., use
    # "www" instead of the host&acute;s real name).
    #
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don&acute;t understand
    # this, ask your network administrator.
    # If your host doesn&acute;t have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    #
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    #
    #ServerName bruno.example.net

    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "/servidor/apache/htdocs"

    #
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    #
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    #
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>

    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something&acute;s not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #

    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory "/servidor/apache/htdocs">

    #
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn&acute;t give it to you.
    #
    Options Indexes FollowSymLinks MultiViews

    #
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all
    </Directory>

    #
    # UserDir: The name of the directory which is appended onto a user&acute;s home
    # directory if a ~user request is received.
    #
    <IfModule mod_userdir.c>
    UserDir public_html
    </IfModule>

    #
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>

    #
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    #
    <IfModule mod_dir.c>
    DirectoryIndex index.html index.htm index.php index.php3 index.shtml
    </IfModule>

    #
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    #
    AccessFileName .htaccess

    #
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    #
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    #
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>

    #
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #
    #CacheNegotiatedDocs

    #
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostnameort that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    #
    UseCanonicalName On

    #
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    #
    <IfModule mod_mime.c>
    TypesConfig /servidor/apache/conf/mime.types
    </IfModule>

    #
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain

    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the &acute;Global
    # Environment&acute; section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it&acute;s enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    #
    <IfModule mod_mime_magic.c>
    MIMEMagicFile /servidor/apache/conf/magic
    </IfModule>

    #
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it&acute;d be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    #
    HostnameLookups Off

    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host&acute;s errors will be logged there and not here.
    #
    ErrorLog /servidor/apache/logs/error_log

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog /servidor/apache/logs/access_log common

    #
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #
    #CustomLog /servidor/apache/logs/referer_log referer
    #CustomLog /servidor/apache/logs/agent_log agent

    #
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog /servidor/apache/logs/access_log combined

    #
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    #
    ServerSignature On

    # EBCDIC configuration:
    # (only for mainframes using the EBCDIC codeset, currently one of:
    # Fujitsu-Siemens&acute; BS2000/OSD, IBM&acute;s OS/390 and IBM&acute;s TPF)!!
    # The following default configuration assumes that "text files"
    # are stored in EBCDIC (so that you can operate on them using the
    # normal POSIX tools like grep and sort) while "binary files" are
    # stored with identical octets as on an ASCII machine.
    #
    # The directives are evaluated in configuration file order, with
    # the EBCDICConvert directives applied before EBCDICConvertByType.
    #
    # If you want to have ASCII HTML documents and EBCDIC HTML documents
    # at the same time, you can use the file extension to force
    # conversion off for the ASCII documents:
    # > AddType text/html .ahtml
    # > EBCDICConvert Off=InOut .ahtml
    #
    # EBCDICConvertByType On=InOut text/* message/* multipart/*
    # EBCDICConvertByType On=In application/x-www-form-urlencoded
    # EBCDICConvertByType On=InOut application/postscript model/vrml
    # EBCDICConvertByType Off=InOut */*


    #
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    #
    <IfModule mod_alias.c>

    #
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn&acute;t aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    #
    Alias /icons/ "/servidor/apache/icons/"

    <Directory "/servidor/apache/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>

    # This Alias will project the on-line documentation tree under /manual/
    # even if you change the DocumentRoot. Comment it if you don&acute;t want to
    # provide access to the on-line documentation.
    #
    Alias /manual/ "/servidor/apache/htdocs/manual/"

    <Directory "/servidor/apache/htdocs/manual">
    Options Indexes FollowSymlinks MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    #
    ScriptAlias /cgi-bin/ "/servidor/apache/cgi-bin/"

    #
    # "/servidor/apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "/servidor/apache/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>

    </IfModule>
    # End of aliases.

    #
    # Redirect allows you to tell clients about documents which used to exist in
    # your server&acute;s namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    #

    #
    # Directives controlling the display of server-generated directory listings.
    #
    <IfModule mod_autoindex.c>

    #
    # FancyIndexing is whether you want fancy directory indexing or standard
    #
    IndexOptions FancyIndexing

    #
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    #
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*

    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core

    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^

    #
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    #
    DefaultIcon /icons/unknown.gif

    #
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz

    #
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    #
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    #
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn&acute;t exist, the server will then look for name.txt and include
    # it as plaintext if found.
    #
    ReadmeName README
    HeaderName HEADER

    #
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    #
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

    </IfModule>
    # End of indexing directives.

    #
    # Document types.
    #
    <IfModule mod_mime.c>

    #
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    #
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz

    #
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    #
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    #
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character &acute;Language&acute; abbreviation is not
    # identical to the two character &acute;Country&acute; code for its country,
    # E.g. &acute;Danmark/dk&acute; versus &acute;Danish/da&acute;.
    #
    # Note 3: In the case of &acute;ltz&acute; we violate the RFC by using a three char
    # specifier. But there is &acute;work in progress&acute; to fix this and get
    # the reference data for rfc1766 cleaned up.
    #
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    #
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .sv
    AddLanguage cz .cz
    AddLanguage ru .ru
    AddLanguage zh-tw .tw
    AddLanguage tw .tw
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8

    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    #
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    #
    <IfModule mod_negotiation.c>
    LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
    </IfModule>

    #
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    #
    AddType application/x-tar .tgz
    AddType image/x-icon .ico

    #
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    #
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    #
    # To use CGI scripts:
    #
    #AddHandler cgi-script .cgi

    #
    # To use server-parsed HTML files
    #
    AddType text/html .shtml
    AddHandler server-parsed .shtml

    #
    # Uncomment the following line to enable Apache&acute;s send-asis HTTP file
    # feature
    #
    #AddHandler send-as-is asis

    #
    # If you wish to use server-parsed imagemap files, use
    #
    #AddHandler imap-file map

    #
    # To enable type maps, you might want to use
    #
    #AddHandler type-map var

    </IfModule>
    # End of document types.

    #
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    #

    #
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #
    #MetaDir .web

    #
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #
    #MetaSuffix .meta

    #
    # Customizable error response (Apache style)
    # these come in three flavors
    #
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (" marks it as text, it does not get output
    #
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    #
    # 3) external redirects
    #ErrorDocument 402 http://some.other-server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will *not* be available to such a script.

    #
    # Customize behaviour based on the browser
    #
    <IfModule mod_setenvif.c>

    #
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    #
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0

    #
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    #
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0

    </IfModule>
    # End of browser customization directives

    #
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your-domain.com" to match your domain to enable.
    #
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>

    #
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your-domain.com" to match your domain to enable.
    #
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>

    #
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>

    #
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #
    #<IfModule mod_proxy.c>
    # ProxyRequests On

    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    # </Directory>

    #
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #
    # ProxyVia On

    #
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    #
    # CacheRoot "/servidor/apache/proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a-domain.com another-domain.edu joes.garage-sale.com

    #</IfModule>
    # End of proxy directives.

    ### Section 3: Virtual Hosts
    #
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn&acute;t need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    #
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    #
    # You may use the command line option &acute;-S&acute; to verify your virtual host
    # configuration.

    #
    # Use name-based virtual hosting.
    #
    #NameVirtualHost *

    #
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #
    #<VirtualHost *>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>

    #<VirtualHost _default_:*>
    #</VirtualHost>

    ##
    ## SSL Global Context
    ##
    ## All SSL configuration in this context applies both to
    ## the main server and all SSL-enabled virtual hosts.
    ##

    #
    # Some MIME-types for downloading Certificates and CRLs
    #
    <IfDefine HAVE_SSL>
    AddType application/x-x509-ca-cert .crt
    AddType application/x-pkcs7-crl .crl
    </IfDefine>

    <IfModule mod_ssl.c>

    # Pass Phrase Dialog:
    # Configure the pass phrase gathering process.
    # The filtering dialog program (`builtin&acute; is a internal
    # terminal dialog) has to provide the pass phrase on stdout.
    SSLPassPhraseDialog builtin

    # Inter-Process Session Cache:
    # Configure the SSL Session Cache: First the mechanism
    # to use and second the expiring timeout (in seconds).
    #SSLSessionCache none
    #SSLSessionCache shmht:/servidor/apache/logs/ssl_scache(512000)
    #SSLSessionCache shmcb:/servidor/apache/logs/ssl_scache(512000)
    SSLSessionCache dbm:/servidor/apache/logs/ssl_scache
    SSLSessionCacheTimeout 300

    # Semaphore:
    # Configure the path to the mutual exclusion semaphore the
    # SSL engine uses internally for inter-process synchronization.
    SSLMutex file:/servidor/apache/logs/ssl_mutex

    # Pseudo Random Number Generator (PRNG):
    # Configure one or more sources to seed the PRNG of the
    # SSL library. The seed data should be of good random quality.
    # WARNING! On some platforms /dev/random blocks if not enough entropy
    # is available. This means you then cannot use the /dev/random device
    # because it would lead to very long connection times (as long as
    # it requires to make more entropy available). But usually those
    # platforms additionally provide a /dev/urandom device which doesn&acute;t
    # block. So, if available, use this one instead. Read the mod_ssl User
    # Manual for more details.
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    #SSLRandomSeed startup file:/dev/random 512
    #SSLRandomSeed startup file:/dev/urandom 512
    #SSLRandomSeed connect file:/dev/random 512
    #SSLRandomSeed connect file:/dev/urandom 512

    # Logging:
    # The home of the dedicated SSL protocol logfile. Errors are
    # additionally duplicated in the general error log file. Put
    # this somewhere where it cannot be used for symlink attacks on
    # a real server (i.e. somewhere where only root can write).
    # Log levels are (ascending order: higher ones include lower ones):
    # none, error, warn, info, trace, debug.
    SSLLog /servidor/apache/logs/ssl_engine_log
    SSLLogLevel info

    </IfModule>

    <IfDefine SSL>

    ##
    ## SSL Virtual Host Context
    ##

    <VirtualHost _default_:443>

    # General setup for the virtual host
    #DocumentRoot "/servidor/apache/htdocs"
    #ServerName bruno.example.net
    #ServerAdmin [email protected]
    ErrorLog /servidor/apache/logs/error_log
    TransferLog /servidor/apache/logs/access_log

    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on

    # SSL Cipher Suite:
    # List the ciphers that the client is permitted to negotiate.
    # See the mod_ssl documentation for a complete list.
    #SSLCipherSuite
    ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

    # Server Certificate:
    # Point SSLCertificateFile at a PEM encoded certificate. If
    # the certificate is encrypted, then you will be prompted for a
    # pass phrase. Note that a kill -HUP will prompt again. A test
    # certificate can be generated with `make certificate&acute; under
    # built time. Keep in mind that if you&acute;ve both a RSA and a DSA
    # certificate you can configure both in parallel (to also allow
    # the use of DSA ciphers, etc.)
    SSLCertificateFile /servidor/apache/conf/ssl.crt/server.crt
    #SSLCertificateFile /servidor/apache/conf/ssl.crt/server-dsa.crt

    # Server Private Key:
    # If the key is not combined with the certificate, use this
    # directive to point at the key file. Keep in mind that if
    # you&acute;ve both a RSA and a DSA private key you can configure
    # both in parallel (to also allow the use of DSA ciphers, etc.)
    SSLCertificateKeyFile /servidor/apache/conf/ssl.key/server.key
    #SSLCertificateKeyFile /servidor/apache/conf/ssl.key/server-dsa.key

    # Server Certificate Chain:
    # Point SSLCertificateChainFile at a file containing the
    # concatenation of PEM encoded CA certificates which form the
    # certificate chain for the server certificate. Alternatively
    # the referenced file can be the same as SSLCertificateFile
    # when the CA certificates are directly appended to the server
    # certificate for convinience.
    #SSLCertificateChainFile /servidor/apache/conf/ssl.crt/ca.crt

    # Certificate Authority (CA):
    # Set the CA certificate verification path where to find CA
    # certificates for client authentication or alternatively one
    # huge file containing all of them (file must be PEM encoded)
    # Note: Inside SSLCACertificatePath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCACertificatePath /servidor/apache/conf/ssl.crt
    #SSLCACertificateFile /servidor/apache/conf/ssl.crt/ca-bundle.crt

    # Certificate Revocation Lists (CRL):
    # Set the CA revocation path where to find CA CRLs for client
    # authentication or alternatively one huge file containing all
    # of them (file must be PEM encoded)
    # Note: Inside SSLCARevocationPath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath /servidor/apache/conf/ssl.crl
    #SSLCARevocationFile /servidor/apache/conf/ssl.crl/ca-bundle.crl

    # Client Authentication (Type):
    # Client certificate verification type and depth. Types are
    # none, optional, require and optional_no_ca. Depth is a
    # number which specifies how deeply to verify the certificate
    # issuer chain before deciding the certificate is not valid.
    #SSLVerifyClient require
    #SSLVerifyDepth 10

    # Access Control:
    # With SSLRequire you can do per-directory access control based
    # on arbitrary complex boolean expressions containing server
    # variable checks and other lookup directives. The syntax is a
    # mixture between C and Perl. See the mod_ssl documentation
    # for more details.
    #<Location /servidor/apache/htdocs>
    #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
    #and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    #and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    #and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    #and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    #or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    </Location>

    # SSL Engine Options:
    # Set various options for the SSL engine.
    # o FakeBasicAuth:
    # Translate the client X.509 into a Basic Authorisation. This means that
    # the standard Auth/DBMAuth methods can be used for access control. The
    # user name is the `one line&acute; version of the client&acute;s X.509 certificate.
    # Note that no password is obtained from the user. Every entry in the user
    # file needs this password: `xxj31ZMTZzkVA&acute;.
    # o ExportCertData:
    # This exports two additional environment variables: SSL_CLIENT_CERT and
    # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    # server (always existing) and the client (only existing when client
    # authentication is used). This can be used to import the certificates
    # into CGI scripts.
    # o StdEnvVars:
    # This exports the standard SSL/TLS related `SSL_*&acute; environment variables.
    # Per default this exportation is switched off for performance reasons,
    # because the extraction step is an expensive operation and is usually
    # useless for serving static content. So one usually enables the
    # exportation for CGI and SSI requests only.
    # o CompatEnvVars:
    # This exports obsolete environment variables for backward compatibility
    # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
    # to provide compatibility to existing CGI scripts.
    # o StrictRequire:
    # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    # under a "Satisfy any" situation, i.e. when it applies access is denied
    # and no other module can change it.
    # o OptRenegotiate:
    # This enables optimized SSL connection renegotiation handling when SSL
    # directives are used in per-directory context.
    #SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
    <Files ~ "\.(cgi|shtml|html|phtml|php?)$">
    SSLOptions +StdEnvVars
    </Files>
    <Directory "/servidor/apache/cgi-bin">
    SSLOptions +StdEnvVars
    </Directory>

    # SSL Protocol Adjustments:
    # The safe and default but still SSL/TLS standard compliant shutdown
    # approach is that mod_ssl sends the close notify alert but doesn&acute;t wait for
    # the close notify alert from client. When you need a different shutdown
    # approach you can use one of the following variables:
    # o ssl-unclean-shutdown:
    # This forces an unclean shutdown when the connection is closed, i.e. no
    # SSL close notify alert is send or allowed to received. This violates
    # the SSL/TLS standard but is needed for some brain-dead browsers. Use
    # this when you receive I/O errors because of the standard approach where
    # mod_ssl sends the close notify alert.
    # o ssl-accurate-shutdown:
    # This forces an accurate shutdown when the connection is closed, i.e. a
    # SSL close notify alert is send and mod_ssl waits for the close notify
    # alert of the client. This is 100% SSL/TLS standard compliant, but in
    # practice often causes hanging connections with brain-dead browsers. Use
    # this only for browsers where you know that their SSL implementation
    # works correctly.
    # Notice: Most problems of broken clients are also related to the HTTP
    # keep-alive facility, so you usually additionally want to disable
    # keep-alive for those clients, too. Use variable "nokeepalive" for this.
    # Similarly, one has to force some clients to use HTTP/1.0 to workaround
    # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
    # "force-response-1.0" for this.
    SetEnvIf User-Agent ".*MSIE.*" \
    nokeepalive ssl-unclean-shutdown \
    downgrade-1.0 force-response-1.0

    # Per-Server Logging:
    # The home of a custom SSL log file. Use this when you want a
    # compact non-error SSL logfile on a virtual host basis.
    CustomLog /servidor/apache/logs/ssl_request_log \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

    </VirtualHost>

    </IfDefine>
    <IMG SRC="images/forum/icons/icon_biggrin.gif">

  18. #18
    BrunoPiaui
    Visitante

    Padrão Cadeado FECHADO!!!!!!!!!

    CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!
    CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!
    CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!
    CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!
    CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!
    CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!CONDEGUI!!!!!!!!!!!!!!!!

    Ja mostro como eu fiz p/ funcionar!

    Obrigado galera!!!!!!!!!!!!!
    Obrigado galera!!!!!!!!!!!!!
    Obrigado galera!!!!!!!!!!!!!

    Bruno Piaui <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif"> <IMG SRC="images/forum/icons/icon_biggrin.gif">