RB800 em Bridge e Nano5 PTP nao Funciona!

Ola galera, negocio aqui na cidade ferrou.. rs o que ta acontecendo é q antes tinha uma RB600 repassando o sinal em 4 paineis, fazendo o PTP com Nano5, acontece que queimou todas as LAN ja da RB600 e precisei trocar, e quando coloquei a RB800 ela cria a Bridge tudo certo, mais nao consigo pingar no Nano, e um detalhe: Apenas o LED Laramjado ascende da LAN da RB, fiz muitos testes perdi 2 dias com isso, e no final peguei uma 433UHA e fiz a Bridge espetei no Nano5 e comecou a pingar e funcionar, detalhe, os LEDS VERDE e LARANJA ficam acesas, alguem sabe me falar se tem q fazer rota na RB800 pra reconhece ou se isso é PAU mesmo de OS, ja q a RB nen aceita a versao 3.30, so da 4.xx pra frente reconhece..
Abraço!!

Citação:

---

Postado originalmente por vanderleisistema

Ola galera, negocio aqui na cidade ferrou.. rs o que ta acontecendo é q antes tinha uma RB600 repassando o sinal em 4 paineis, fazendo o PTP com Nano5, acontece que queimou todas as LAN ja da RB600 e precisei trocar, e quando coloquei a RB800 ela cria a Bridge tudo certo, mais nao consigo pingar no Nano, e um detalhe: Apenas o LED Laramjado ascende da LAN da RB, fiz muitos testes perdi 2 dias com isso, e no final peguei uma 433UHA e fiz a Bridge espetei no Nano5 e comecou a pingar e funcionar, detalhe, os LEDS VERDE e LARANJA ficam acesas, alguem sabe me falar se tem q fazer rota na RB800 pra reconhece ou se isso é PAU mesmo de OS, ja q a RB nen aceita a versao 3.30, so da 4.xx pra frente reconhece..
Abraço!!

---

Só analisando o Hardware amigo. pelo seu relato, parece erro de hardware mesmo .

Também acho que é hardware. Mas amigo, você alterou algo na configuração depois da troca?

Cara, vc configurou as bridge todas corretamente, tipo adicionou todas as ports às bridges? e os PTP como está a configuração? passa pra agente.. :p

Opa, beleza, entao era uma RB600 com o Nano5 que estava tudo funcionando! dai caiu um raio nao sei muito certo o que houve parou tudo.
Peguei a RB800 que tinha de reserva criaei a Bridge, configurei tudo certin, espetei la e nada, o estranho de tudo isso que tenho duas RB800 novas, e ta tudo assim, o LED VERDE nao ascende nen com bomba, so o laranja, so tao ascendendo os dois LEDS se eu plugar o RB no PC direto ai sim ascende as duas..
Abraço!

Citação:

---

Postado originalmente por Squire

Cara, vc configurou as bridge todas corretamente, tipo adicionou todas as ports às bridges? e os PTP como está a configuração? passa pra agente.. :p

---

O PTP esta tudo OK, a gnt fez o teste, quando subimos na torre, ja tem um cabo de rede descendo da torre pra fazer testes, espetei o nano direto no note em baixo e esta fechando tudo certo, pingando normal, reconhecendo o outro lado tudo certin!
Abraço.

As regras..
Posta pra gente

Ja trocou o cabo d rede q vai para a RB? usa fonte no nano ou liga direto no cabo? a RB vc faz os filtros da bridge? coloca ip so na porta q usa o nano e tenta pingar ele! ai dpois vc cria a bridge, melhor e vc restaurar a config da Rb a padrao, ai vc testa, conecta ela num cabo separado e coloca o ip na porta do nano e acessa ela via mac, e testa, c num resolver manda trocar! rs
qlq coisa estamos ai!

Citação:

---

Postado originalmente por nonoque

As regras..
Posta pra gente

---

Ai colega!!
é estranho.. rs so pra confirmar, eu liguei ela dinovo no servidor com essas configuraçoes e apenas a LED laranja ascende, apos isso desconectei e conectei direto no PC e as duas LEDS ascendem, "laranja e verde". :confused:
[admin@MegaNet - Bridge/RB600 Painel de 15Dbi Ideal] > export
# jan/01/1970 20:09:29 by RouterOS 4.13
# software id = W64S-DCXH
#
/interface bridge
add admin-mac=00:40:F4:DC:E2:26 ageing-time=5m arp=enabled auto-mac=no \
comment="Interface Bridge" disabled=no forward-delay=15s l2mtu=1600 \
max-message-age=20s mtu=1500 name="Bridge RB600" priority=0x8000 \
protocol-mode=rstp transmit-hold-count=6
/interface ethernet
set 0 arp=enabled auto-negotiation=yes comment="Interfaces LAN" disabled=no \
full-duplex=yes l2mtu=1600 mac-address=00:0C:42:73:00:39 mtu=1500 name=\
LAN1 speed=100Mbps
set 1 arp=enabled auto-negotiation=yes comment="" disabled=no full-duplex=yes \
l2mtu=1600 mac-address=00:0C:42:73:00:3B mtu=1500 name=LAN3 speed=100Mbps
set 2 arp=enabled auto-negotiation=yes comment="" disabled=no full-duplex=yes \
l2mtu=1600 mac-address=00:0C:42:73:00:3A mtu=1500 name=LAN2 speed=100Mbps
/interface wireless security-profiles
set default authentication-types="" eap-methods=passthrough group-ciphers="" \
group-key-update=5m interim-update=0s management-protection=disabled \
management-protection-key="" mode=none name=default \
radius-eap-accounting=no radius-mac-accounting=no \
radius-mac-authentication=no radius-mac-caching=disabled \
radius-mac-format=XX:XX:XX:XX:XX:XX radius-mac-mode=as-username \
static-algo-0=none static-algo-1=none static-algo-2=none static-algo-3=\
none static-key-0="" static-key-1="" static-key-2="" static-key-3="" \
static-sta-private-algo=none static-sta-private-key="" \
static-transmit-key=key-0 supplicant-identity=MikroTik tls-certificate=\
none tls-mode=no-certificates unicast-ciphers="" wpa-pre-shared-key="" \
wpa2-pre-shared-key=""
/interface wireless
set 0 ack-timeout=dynamic adaptive-noise-immunity=none allow-sharedkey=no \
antenna-gain=0 antenna-mode=ant-a area="" arp=enabled band=2.4ghz-b \
basic-rates-a/g="" basic-rates-b=11Mbps burst-time=disabled comment="" \
compression=no country=no_country_set default-ap-tx-limit=0 \
default-authentication=yes default-client-tx-limit=0 default-forwarding=\
yes dfs-mode=none disable-running-check=no disabled=no \
disconnect-timeout=3s frame-lifetime=0 frequency=2447 frequency-mode=\
manual-txpower frequency-offset=0 hide-ssid=no \
hw-fragmentation-threshold=disabled hw-protection-mode=none \
hw-protection-threshold=0 hw-retries=4 l2mtu=2290 mac-address=\
00:02:6F:7B:C8:9E max-station-count=2007 mode=ap-bridge mtu=1500 name=\
Mega-Oeste noise-floor-threshold=default on-fail-retry-time=100ms \
periodic-calibration=default periodic-calibration-interval=60 \
preamble-mode=both proprietary-extensions=post-2.9.25 radio-name=\
00026F7BC89E rate-set=configured scan-list=default security-profile=\
default ssid=Mega-Oeste station-bridge-clone-mac=00:00:00:00:00:00 \
supported-rates-a/g="" supported-rates-b=11Mbps tx-power=23 \
tx-power-mode=all-rates-fixed update-stats-interval=disabled \
wds-cost-range=50-150 wds-default-bridge=none wds-default-cost=100 \
wds-ignore-ssid=no wds-mode=disabled wmm-support=disabled
set 1 ack-timeout=dynamic adaptive-noise-immunity=none allow-sharedkey=no \
antenna-gain=0 antenna-mode=ant-a area="" arp=enabled band=2.4ghz-b \
basic-rates-a/g="" basic-rates-b=11Mbps burst-time=disabled comment=\
"Interface Wireless" compression=no country=no_country_set \
default-ap-tx-limit=0 default-authentication=yes default-client-tx-limit=\
0 default-forwarding=yes dfs-mode=none disable-running-check=no disabled=\
no disconnect-timeout=3s frame-lifetime=0 frequency=2437 frequency-mode=\
manual-txpower frequency-offset=0 hide-ssid=no \
hw-fragmentation-threshold=disabled hw-protection-mode=none \
hw-protection-threshold=0 hw-retries=4 l2mtu=2290 mac-address=\
00:02:6F:7B:C8:B5 max-station-count=2007 mode=ap-bridge mtu=1500 name=\
Mega-Leste noise-floor-threshold=default on-fail-retry-time=100ms \
periodic-calibration=default periodic-calibration-interval=60 \
preamble-mode=both proprietary-extensions=post-2.9.25 radio-name=\
00026F7BC8B5 rate-set=configured scan-list=default security-profile=\
default ssid=Mega-Leste station-bridge-clone-mac=00:00:00:00:00:00 \
supported-rates-a/g="" supported-rates-b=11Mbps tx-power=23 \
tx-power-mode=all-rates-fixed update-stats-interval=disabled \
wds-cost-range=50-150 wds-default-bridge=none wds-default-cost=100 \
wds-ignore-ssid=no wds-mode=disabled wmm-support=disabled
set 2 ack-timeout=dynamic adaptive-noise-immunity=none allow-sharedkey=no \
antenna-gain=0 antenna-mode=ant-a area="" arp=enabled band=2.4ghz-b \
basic-rates-a/g="" basic-rates-b=11Mbps burst-time=disabled comment="" \
compression=no country=no_country_set default-ap-tx-limit=0 \
default-authentication=yes default-client-tx-limit=0 default-forwarding=\
yes dfs-mode=none disable-running-check=no disabled=no \
disconnect-timeout=3s frame-lifetime=0 frequency=2427 frequency-mode=\
manual-txpower frequency-offset=0 hide-ssid=no \
hw-fragmentation-threshold=disabled hw-protection-mode=none \
hw-protection-threshold=0 hw-retries=4 l2mtu=2290 mac-address=\
00:02:6F:7B:C8:B0 max-station-count=2007 mode=ap-bridge mtu=1500 name=\
Mega-Sul noise-floor-threshold=default on-fail-retry-time=100ms \
periodic-calibration=default periodic-calibration-interval=60 \
preamble-mode=both proprietary-extensions=post-2.9.25 radio-name=\
00026F7BC8B0 rate-set=configured scan-list=default security-profile=\
default ssid=Mega-Sul station-bridge-clone-mac=00:00:00:00:00:00 \
supported-rates-a/g="" supported-rates-b=11Mbps tx-power=23 \
tx-power-mode=all-rates-fixed update-stats-interval=disabled \
wds-cost-range=50-150 wds-default-bridge=none wds-default-cost=100 \
wds-ignore-ssid=no wds-mode=disabled wmm-support=disabled
set 3 ack-timeout=dynamic adaptive-noise-immunity=none allow-sharedkey=no \
antenna-gain=0 antenna-mode=ant-a area="" arp=enabled band=2.4ghz-b \
basic-rates-a/g="" basic-rates-b=11Mbps burst-time=disabled comment="" \
compression=no country=no_country_set default-ap-tx-limit=0 \
default-authentication=yes default-client-tx-limit=0 default-forwarding=\
yes dfs-mode=none disable-running-check=no disabled=no \
disconnect-timeout=3s frame-lifetime=0 frequency=2457 frequency-mode=\
manual-txpower frequency-offset=0 hide-ssid=no \
hw-fragmentation-threshold=disabled hw-protection-mode=none \
hw-protection-threshold=0 hw-retries=7 l2mtu=2290 mac-address=\
00:02:6F:7B:B2:B3 max-station-count=2007 mode=ap-bridge mtu=1500 name=\
Mega-Norte noise-floor-threshold=default on-fail-retry-time=100ms \
periodic-calibration=default periodic-calibration-interval=60 \
preamble-mode=both proprietary-extensions=post-2.9.25 radio-name=\
00026F7BB2B3 rate-set=configured scan-list=default security-profile=\
default ssid=Mega-Norte station-bridge-clone-mac=00:00:00:00:00:00 \
supported-rates-a/g="" supported-rates-b=11Mbps tx-power=23 \
tx-power-mode=all-rates-fixed update-stats-interval=disabled \
wds-cost-range=50-150 wds-default-bridge=none wds-default-cost=100 \
wds-ignore-ssid=no wds-mode=disabled wmm-support=disabled
/interface wireless nstreme
set Mega-Oeste comment="" disable-csma=no enable-nstreme=no enable-polling=\
yes framer-limit=3200 framer-policy=none
set Mega-Leste comment="Interface Wireless" disable-csma=no enable-nstreme=no \
enable-polling=yes framer-limit=3200 framer-policy=none
set Mega-Sul comment="" disable-csma=no enable-nstreme=no enable-polling=yes \
framer-limit=3200 framer-policy=none
set Mega-Norte comment="" disable-csma=no enable-nstreme=no enable-polling=\
yes framer-limit=3200 framer-policy=none
/interface wireless manual-tx-power-table
set Mega-Oeste comment="" manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbp\

s:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,5\
4Mbps:17,HT20-0:0,HT20-1:0,HT20-2:0,HT20-3:0,HT20-4:0,HT20-5:0,HT20-6:0,HT\
20-7:0,HT40-0:0,HT40-1:0,HT40-2:0,HT40-3:0,HT40-4:0,HT40-5:0,HT40-6:0,HT40\
-7:0"
set Mega-Leste comment="Interface Wireless" manual-tx-powers="1Mbps:17,2Mbps:1\
7,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36M\
bps:17,48Mbps:17,54Mbps:17,HT20-0:0,HT20-1:0,HT20-2:0,HT20-3:0,HT20-4:0,HT\
20-5:0,HT20-6:0,HT20-7:0,HT40-0:0,HT40-1:0,HT40-2:0,HT40-3:0,HT40-4:0,HT40\
-5:0,HT40-6:0,HT40-7:0"
set Mega-Sul comment="" manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:\
17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,54M\
bps:17,HT20-0:0,HT20-1:0,HT20-2:0,HT20-3:0,HT20-4:0,HT20-5:0,HT20-6:0,HT20\
-7:0,HT40-0:0,HT40-1:0,HT40-2:0,HT40-3:0,HT40-4:0,HT40-5:0,HT40-6:0,HT40-7\
:0"
set Mega-Norte comment="" manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbp\
s:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,5\
4Mbps:17,HT20-0:17,HT20-1:17,HT20-2:17,HT20-3:17,HT20-4:17,HT20-5:17,HT20-\
6:17,HT20-7:17,HT40-0:17,HT40-1:17,HT40-2:17,HT40-3:17,HT40-4:17,HT40-5:17\
,HT40-6:17,HT40-7:17"
/ip hotspot profile
set default dns-name="" hotspot-address=0.0.0.0 html-directory=hotspot \
http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=cookie,http-chap \
name=default rate-limit="" smtp-server=0.0.0.0 split-user-domain=no \
use-radius=no
/ip hotspot user profile
set default advertise=no idle-timeout=none keepalive-timeout=2m name=default \
open-status-page=always shared-users=1 status-autorefresh=1m \
transparent-proxy=yes
/ip ipsec proposal
set default auth-algorithms=sha1 comment="" disabled=no enc-algorithms=3des \
lifetime=30m name=default pfs-group=modp1024
/port
set 0 baud-rate=115200 data-bits=8 flow-control=hardware name=serial0 parity=\
none stop-bits=1
set 1 baud-rate=115200 data-bits=8 flow-control=none name=serial1 parity=none \
stop-bits=1
/ppp profile
set default change-tcp-mss=yes comment="" name=default only-one=default \
use-compression=default use-encryption=default use-vj-compression=default
set default-encryption change-tcp-mss=yes comment="" name=default-encryption \
only-one=default use-compression=default use-encryption=yes \
use-vj-compression=default
/queue type
set default kind=pfifo name=default pfifo-limit=50
set ethernet-default kind=pfifo name=ethernet-default pfifo-limit=50
set wireless-default kind=sfq name=wireless-default sfq-allot=1514 \
sfq-perturb=5
set synchronous-default kind=red name=synchronous-default red-avg-packet=1000 \
red-burst=20 red-limit=60 red-max-threshold=50 red-min-threshold=10
set hotspot-default kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=\
5
set default-small kind=pfifo name=default-small pfifo-limit=10
/routing bgp instance
set default as=65530 client-to-client-reflection=yes comment="" disabled=no \
ignore-as-path-len=no name=default out-filter="" redistribute-connected=\
no redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \
redistribute-static=no router-id=0.0.0.0 routing-table=""
/routing ospf instance
set default comment="" disabled=no distribute-default=never in-filter=ospf-in \
metric-bgp=auto metric-connected=20 metric-default=1 metric-other-ospf=\
auto metric-rip=20 metric-static=20 name=default out-filter=ospf-out \
redistribute-bgp=no redistribute-connected=no redistribute-other-ospf=no \
redistribute-rip=no redistribute-static=no router-id=0.0.0.0
/routing ospf area
set backbone area-id=0.0.0.0 comment="" disabled=no instance=default name=\
backbone type=default
/snmp
set contact="" enabled=no engine-boots=0 engine-id="" location="" \
time-window=15 trap-sink=0.0.0.0 trap-version=1
/snmp community
set public address=0.0.0.0/0 authentication-password="" \
authentication-protocol=MD5 encryption-password="" encryption-protocol=\
DES name=public read-access=yes security=none write-access=no
/system logging action
set memory memory-lines=100 memory-stop-on-full=no name=memory target=memory
set disk disk-file-count=2 disk-file-name=log disk-lines-per-file=100 \
disk-stop-on-full=no name=disk target=disk
set echo name=echo remember=yes target=echo
set remote bsd-syslog=no name=remote remote=0.0.0.0:514 src-address=0.0.0.0 \
syslog-facility=daemon syslog-severity=auto target=remote
/system routerboard settings
set baud-rate=115200 boot-delay=2s boot-device=nand-if-fail-then-ethernet \
boot-protocol=bootp cpu-frequency=800MHz enable-jumper-reset=yes \
enter-setup-on=any-key force-backup-booter=no memory-data-rate=400DDR \
silent-boot=no
set baud-rate=115200 boot-delay=2s boot-device=nand-if-fail-then-ethernet \
boot-protocol=bootp cpu-frequency=800MHz enable-jumper-reset=yes \
enter-setup-on=any-key force-backup-booter=no memory-data-rate=400DDR \
silent-boot=no
/user group
add comment="" name=read policy="local,telnet,ssh,reboot,read,test,winbox,pass\
word,web,sniff,sensitive,!ftp,!write,!policy"
add comment="" name=write policy="local,telnet,ssh,reboot,read,write,test,winb\
ox,password,web,sniff,sensitive,!ftp,!policy"
add comment="" name=full policy="local,telnet,ssh,ftp,reboot,read,write,policy\
,test,winbox,password,web,sniff,sensitive"
/interface bridge filter
add action=accept chain=forward comment="Drop NetBios TCP Bridge" disabled=no \
dst-port=135-139 ip-protocol=tcp mac-protocol=ip
add action=accept chain=forward comment="Drop NetBios UDP Bridge" disabled=no \
dst-port=135-139 ip-protocol=udp mac-protocol=ip
add action=accept chain=forward comment="Drop NetBios TCP 455 Bridge" \
disabled=no dst-port=455 ip-protocol=tcp mac-protocol=ip
/interface bridge port
add bridge="Bridge RB600" comment="" disabled=no edge=auto external-fdb=auto \
horizon=none interface=LAN1 path-cost=10 point-to-point=auto priority=\
0x80
add bridge="Bridge RB600" comment="" disabled=no edge=auto external-fdb=auto \

horizon=none interface=LAN2 path-cost=10 point-to-point=auto priority=\
0x80
add bridge="Bridge RB600" comment="" disabled=no edge=auto external-fdb=auto \
horizon=none interface=LAN3 path-cost=10 point-to-point=auto priority=\
0x80
add bridge="Bridge RB600" comment="" disabled=no edge=auto external-fdb=auto \
horizon=none interface=Mega-Leste path-cost=10 point-to-point=auto \
priority=0x80
add bridge="Bridge RB600" comment="" disabled=no edge=auto external-fdb=auto \
horizon=none interface=Mega-Norte path-cost=10 point-to-point=auto \
priority=0x80
add bridge="Bridge RB600" comment="" disabled=no edge=auto external-fdb=auto \
horizon=none interface=Mega-Oeste path-cost=10 point-to-point=auto \
priority=0x80
add bridge="Bridge RB600" comment="" disabled=no edge=auto external-fdb=auto \
horizon=none interface=Mega-Sul path-cost=10 point-to-point=auto \
priority=0x80
/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=\
no
/interface l2tp-server server
set authentication=pap,chap,mschap1,mschap2 default-profile=\
default-encryption enabled=no max-mru=1460 max-mtu=1460 mrru=disabled
/interface ovpn-server server
set auth=sha1,md5 certificate=none cipher=blowfish128,aes128 default-profile=\
default enabled=no keepalive-timeout=60 mac-address=FE:B3:99:01:A7:A3 \
max-mtu=1500 mode=ip netmask=24 port=1194 require-client-certificate=no
/interface pptp-server server
set authentication=mschap1,mschap2 default-profile=default-encryption \
enabled=no keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled
/interface wireless align
set active-mode=yes audio-max=-20 audio-min=-100 audio-monitor=\
00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 frame-size=300 \
frames-per-second=25 receive-all=no ssid-all=no
/interface wireless sniffer
set channel-time=200ms file-limit=10 file-name="" memory-limit=10 \
multiple-channels=no only-headers=no receive-errors=no streaming-enabled=\
no streaming-max-rate=0 streaming-server=0.0.0.0
/interface wireless snooper
set channel-time=200ms multiple-channels=yes receive-errors=no
/ip accounting
set account-local-traffic=no enabled=no threshold=256
/ip accounting web-access
set accessible-via-web=no address=0.0.0.0/0
/ip address
add address=10.0.0.1/24 broadcast=10.0.0.255 comment=Bridge disabled=no \
interface="Bridge RB600" network=10.0.0.0
/ip dhcp-server config
set store-leases-disk=5m
/ip dns
set allow-remote-requests=no cache-max-ttl=1w cache-size=2048KiB \
max-udp-packet-size=512
/ip firewall connection tracking
set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \
tcp-close-wait-timeout=10s tcp-established-timeout=1d \
tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \
tcp-syn-received-timeout=5s tcp-syn-sent-timeout=5s tcp-syncookie=no \
tcp-time-wait-timeout=10s udp-stream-timeout=3m udp-timeout=10s
/ip firewall service-port
set ftp disabled=yes ports=21
set tftp disabled=yes ports=69
set irc disabled=yes ports=6667
set h323 disabled=yes
set sip disabled=yes ports=5060,5061
set pptp disabled=yes
/ip hotspot service-port
set ftp disabled=no ports=21
/ip neighbor discovery
set LAN1 discover=yes
set "Bridge RB600" discover=yes
set Mega-Oeste discover=no
set Mega-Leste discover=no
set Mega-Sul discover=no
set LAN3 discover=yes
set LAN2 discover=yes
set Mega-Norte discover=no
/ip proxy
set always-from-cache=no cache-administrator=webmaster cache-hit-dscp=4 \
cache-on-disk=no enabled=no max-cache-size=none max-client-connections=\
600 max-fresh-time=3d max-server-connections=600 parent-proxy=0.0.0.0 \
parent-proxy-port=0 port=8080 serialize-connections=no src-address=\
0.0.0.0
/ip service
set telnet address=0.0.0.0/0 disabled=yes port=23
set ftp address=0.0.0.0/0 disabled=yes port=21
set www address=0.0.0.0/0 disabled=no port=809
set ssh address=0.0.0.0/0 disabled=yes port=22
set www-ssl address=0.0.0.0/0 certificate=none disabled=yes port=443
set api address=0.0.0.0/0 disabled=yes port=8728
set winbox address=0.0.0.0/0 disabled=no port=8291
/ip socks
set connection-idle-timeout=2m enabled=no max-connections=200 port=1080
/ip traffic-flow
set active-flow-timeout=30m cache-entries=4k enabled=no \
inactive-flow-timeout=15s interfaces=all
/ip upnp
set allow-disable-external-interface=yes enabled=no show-dummy-rule=yes
/mpls
set dynamic-label-range=16-1048575 propagate-ttl=yes
/mpls interface
add comment="" disabled=no interface=all mpls-mtu=1508
/mpls ldp
set distribute-for-default-route=no enabled=no hop-limit=255 loop-detect=no \
lsr-id=0.0.0.0 path-vector-limit=255 transport-address=0.0.0.0 \
use-explicit-null=no
/ppp aaa
set accounting=yes interim-update=0s use-radius=no
/queue interface
set LAN1 queue=ethernet-default
set "Bridge RB600" queue=default
set Mega-Oeste queue=wireless-default
set Mega-Leste queue=wireless-default
set Mega-Sul queue=wireless-default
set LAN3 queue=ethernet-default
set LAN2 queue=ethernet-default
set Mega-Norte queue=wireless-default
/radius incoming
set accept=no port=3799
/routing bfd interface
set all comment="" disabled=no interface=all interval=0.2sec min-rx=0.2sec \
multiplier=5
/routing mme
set bidirectional-timeout=2 gateway-class=none gateway-keepalive=1m \
gateway-selection=no-gateway origination-interval=5s preferred-gateway=\
0.0.0.0 timeout=1m ttl=50
/routing rip
set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 \
metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \
redistribute-connected=no redistribute-ospf=no redistribute-static=no \
routing-table=main timeout-timer=3m update-timer=30s
/store
add comment="" disabled=no disk=system name=web-proxy1 type=web-proxy
/system clock
set time-zone-name=America/Campo_Grande
/system clock manual
set dst-delta=+00:00 dst-end="jan/01/1970 00:00:00" dst-start=\
"jan/01/1970 00:00:00" time-zone=+00:00
/system console
add disabled=no port=serial0 term=vt102
/system health
set fan-mode=manual use-fan=main
/system identity
set name="MegaNet - Bridge/RB600 Painel de 15Dbi Ideal"
/system logging
add action=memory disabled=no prefix="" topics=info
add action=memory disabled=no prefix="" topics=error
add action=memory disabled=no prefix="" topics=warning
add action=echo disabled=no prefix="" topics=critical
/system note
set note="" show-at-login=yes
/system ntp client
set enabled=no mode=broadcast primary-ntp=0.0.0.0 secondary-ntp=0.0.0.0
/system upgrade mirror
set check-interval=1d enabled=no primary-server=0.0.0.0 secondary-server=\
0.0.0.0 user=""
/system watchdog
set auto-send-supout=no automatic-supout=yes no-ping-delay=5m watch-address=\
none watchdog-timer=yes
/tool bandwidth-server
set allocate-udp-ports-from=2000 authenticate=yes enabled=yes max-sessions=10
/tool e-mail
set from=<> password="" server=0.0.0.0:25 username=""
/tool graphing
set page-refresh=300 store-every=5min
/tool mac-server
add disabled=no interface=all
/tool mac-server ping
set enabled=yes
/tool sms
set allowed-number="" channel=0 keep-max-sms=0 receive-enabled=no secret=""
/tool sniffer
set file-limit=10 file-name="" filter-address1=0.0.0.0/0:0-65535 \
filter-address2=0.0.0.0/0:0-65535 filter-protocol=ip-only filter-stream=\
yes interface=all memory-limit=10 memory-scroll=no only-headers=no \
streaming-enabled=no streaming-server=0.0.0.0
/user aaa
set accounting=yes default-group=read interim-update=0s use-radius=no
[admin@MegaNet - Bridge/RB600 Painel de 15Dbi Ideal] >


OBS: é o basico o que fiz, apenas criei a bridge add todas interfaces, dei um ip a ela, e fui configurando os cartoes, apenas isso.. o problema que percebi é na parte da RB, pq do NANO pra rede "servidor" esta tudo funcionando e reconhecendo.

Abraço.

Citação:

---

Postado originalmente por rfferraz

Ja trocou o cabo d rede q vai para a RB? usa fonte no nano ou liga direto no cabo? a RB vc faz os filtros da bridge? coloca ip so na porta q usa o nano e tenta pingar ele! ai dpois vc cria a bridge, melhor e vc restaurar a config da Rb a padrao, ai vc testa, conecta ela num cabo separado e coloca o ip na porta do nano e acessa ela via mac, e testa, c num resolver manda trocar! rs
qlq coisa estamos ai!

---

Ola colega, entao a RB ja ta no chao, o que ta rodando la é uma 433 so pra quebra um galho, ja troquei o cabo de rede que vai pra RB800 sim, uso fonte de 5 Amper, é fonte separadas, o POE é do NANAO e a fonte da RB, faço filtro na bridge sim, na RB600 sempre funcionou so nao sei nessa 800, entao, a RB é nova, ja resetei ela via winbox, via hardware e da tudo na mesma coisa, mais o que estranho é que tenho duas RB800 e as duas tao assim, sera pau de OS?
Abraço.

Acho que um pouco atrasado, mas irei postar um detalhe, as regras das sequencias de cores para portas 10/100/1000 são: branco laranja, laranja, branco verde, azul, branco azul, verde, branco marrom e marrom.
tem que ser desse modo nas duas pontas, não trance os pares.

Citação:

---

Postado originalmente por agnaldo52

Acho que um pouco atrasado, mas irei postar um detalhe, as regras das sequencias de cores para portas 10/100/1000 são: branco laranja, laranja, branco verde, azul, branco azul, verde, branco marrom e marrom.
tem que ser desse modo nas duas pontas, não trance os pares.

---

Beleza colega, eu funcionei ela normal o q tava acontecendo é q nao ascende mesmo as luzes e mesmo assim ta normal na base, deve ser pau de versaoo.. mesmo assim, valeu pela dica..

Citação:

---

Postado originalmente por vanderleisistema

Opa, beleza, entao era uma RB600 com o Nano5 que estava tudo funcionando! dai caiu um raio nao sei muito certo o que houve parou tudo.
Peguei a RB800 que tinha de reserva criaei a Bridge, configurei tudo certin, espetei la e nada, o estranho de tudo isso que tenho duas RB800 novas, e ta tudo assim, o LED VERDE nao ascende nen com bomba, so o laranja, so tao ascendendo os dois LEDS se eu plugar o RB no PC direto ai sim ascende as duas..
Abraço!

---

Refaz teus cabos de rede. que tipo voce está usando? Crossover ou normal?

Citação:

---

Postado originalmente por leandrolopeswifi

Refaz teus cabos de rede. que tipo voce está usando? Crossover ou normal?

---

A sequencia é, VB, V, LB, A, AB, L, MB, M, ta funcionando normal, é pau de versao so pode.. tenho funcionando RB1100 tbm q nao ascende a luz verde das LAN... rs
Abraço.