ao iniciar o Bind ele dá Falhou, como descubro onde está o problema?
Quais os arquivos de configurações necessarios eu devo postar aqui pra vcs me ajudarem?
Versão Imprimível
ao iniciar o Bind ele dá Falhou, como descubro onde está o problema?
Quais os arquivos de configurações necessarios eu devo postar aqui pra vcs me ajudarem?
este é o meu /var/named/named.caCitação:
Postado originalmente por jrctec
; This file holds the information on root name servers needed to
; initialize cache of Internet domain name servers
; (e.g. reference this file in the "cache . "
; configuration file of BIND domain name servers).
;
; This file is made available by InterNIC registration services
; under anonymous FTP as
; file /domain/named.root
; on server FTP.RS.INTERNIC.NET
; -OR- under Gopher at RS.INTERNIC.NET
; under menu InterNIC Registration Services (NSI)
; submenu InterNIC Registration Archives
; file named.root
;
; last update: Aug 22, 1997
; related version of root zone: 1997082200
;
;
; formerly NS.INTERNIC.NET
;
. 3600000 IN NS A.ROOT-SERVERS.NET.
A.ROOT-SERVERS.NET. 3600000 A 198.41.0.4
;
; formerly NS1.ISI.EDU
;
. 3600000 NS B.ROOT-SERVERS.NET.
B.ROOT-SERVERS.NET. 3600000 A 128.9.0.107
;
; formerly C.PSI.NET
;
. 3600000 NS C.ROOT-SERVERS.NET.
C.ROOT-SERVERS.NET. 3600000 A 192.33.4.12
;
; formerly TERP.UMD.EDU
;
. 3600000 NS D.ROOT-SERVERS.NET.
D.ROOT-SERVERS.NET. 3600000 A 128.8.10.90
;
; formerly NS.NASA.GOV
;
. 3600000 NS E.ROOT-SERVERS.NET.
E.ROOT-SERVERS.NET. 3600000 A 192.203.230.10
;
; formerly NS.ISC.ORG
;
. 3600000 NS F.ROOT-SERVERS.NET.
F.ROOT-SERVERS.NET. 3600000 A 192.5.5.241
;
; formerly NS.NIC.DDN.MIL
;
. 3600000 NS G.ROOT-SERVERS.NET.
G.ROOT-SERVERS.NET. 3600000 A 192.112.36.4
;
; formerly AOS.ARL.ARMY.MIL
;
. 3600000 NS H.ROOT-SERVERS.NET.
H.ROOT-SERVERS.NET. 3600000 A 128.63.2.53
;
; formerly NIC.NORDU.NET
;
. 3600000 NS I.ROOT-SERVERS.NET.
I.ROOT-SERVERS.NET. 3600000 A 192.36.148.17
;
; temporarily housed at NSI (InterNIC)
;
. 3600000 NS J.ROOT-SERVERS.NET.
J.ROOT-SERVERS.NET. 3600000 A 198.41.0.10
;
; housed in LINX, operated by RIPE NCC
;
. 3600000 NS K.ROOT-SERVERS.NET.
K.ROOT-SERVERS.NET. 3600000 A 193.0.14.129
;
; temporarily housed at ISI (IANA)
;
. 3600000 NS L.ROOT-SERVERS.NET.
L.ROOT-SERVERS.NET. 3600000 A 198.32.64.12
;
; housed in Japan, operated by WIDE
;
. 3600000 NS M.ROOT-SERVERS.NET.
M.ROOT-SERVERS.NET. 3600000 A 202.12.27.33
; End of File
este é o /var/named/named.local
@ IN SOA localhost. root.localhost. (
1997022700 ; Serial
28800 ; Refresh
14400 ; Retry
3600000 ; Expire
86400 ) ; Minimum
IN NS localhost.
1 IN PTR localhost.
esse é o /var/named/synapse.com.br.db
synapse.com.br. IN SOA lablinux.synapse.com.br. root.lablinux.synapse.com.br. (
950000
86400
3600
3600000
3600 )
synapse.com.br. IN A 192.168.0.254
synapse.com.br. IN NS lablinux.synapse.com.br.
synapse.com.br. IN MX 5 lablinux.synapse.com.br.
www IN A 192.168.0.254
esse é o /var/named/synapse.com.br.rev
0.168.192.in-addr.arpa. IN SOA lablinux.synapse.com.br. root.lablinux.synapse.com.br. (
950000
86400
3600
3600000
3600 )
0.168.192.in-addr.arpa. IN NS lablinux.synapse.com.br.
1 IN PTR lablinux.synapse.com.br.
e esse é o /etc/named/named.conf
// generated by named-bootconf.pl
options {
directory "/var/named";
/*
* If there is a firewall between you and nameservers you want
* to talk to, you might need to uncomment the query-source
* directive below. Previous versions of BIND always asked
* questions using port 53, but BIND 8.1 uses an unprivileged
* port by default.
*/
// query-source address * port 53;
dump-file "/var/named/dump/named_dump.db";
statistics-file "/var/named/dump/named.stats";
memstatistics-file "/var/named/dump/named.memstats";
// remove this next line if you want named to listen on
// all available interfaces, or adjust add new ones as
// you see fit
listen-on { 192.168.0.254;127.0.0.1/32; };
};
//
// a caching only nameserver config
//
zone "." {
type hint;
file "named.ca";
};
zone "0.0.127.in-addr.arpa" {
type master;
file "named.local";
};
zone "synapse.com.br" {
type master;
file "synapse.com.br.db";
};
zone "0.168.192.in-addr.arpa" {
type master;
file "synapse.com.br.rev";
};
//
// a shared secret for the rndc tool
// this key must be the same one that is in the
// /etc/rndc.conf file
//
//
// a control channel for the new rndc tool
//
controls {
inet 127.0.0.1 allow { localhost; } keys { key_rndc; };
};
eu só fiz esses arquivos de acordo com o tutorial que eu li e estou tentando passo a passo.
e estão deste jeito que eu postei, na hora de startar ele só dá falhou e nenhuma mensagem.
inicia o servidor com -g;
não sei sua dist, mas localiza o executavel, tipo :
ele mostra a depuracao e te diz o erro.Código :
/usr/bin/named -g
A minha distro é conectiva 10.Citação:
Postado originalmente por 354mp
Não eu certo,
tentei /etc/init.d/named start -g
tentei /etc/init.d/named -g
tentei /etc/init.d/named -g start
só a primeira deu a mesma mensagem falhou
e mais nada
E no /var/log/messages não aparece nada de erro?
hehe, vc não entendeu!
Em /etc/init.d não é o executável, é um script de inicializacao que chama o executavel.
digita aídepois, sabendo qual o path, faz o que eu te passei antes...Código :
type named
root@lablinux sysop]# type namedCitação:
Postado originalmente por 354mp
bash: type: named: not found
[root@lablinux sysop]#
hehehe... acho que o named não tá instalado...
no /var/log/messages tá assim:
May 12 07:40:02 caught syslogd 1.4.1: restart.
May 12 07:40:02 caught syslog: syslogd startup succeeded
May 12 07:40:02 caught kernel: klogd 1.4.1, log source = /proc/kmsg started.
May 12 07:40:02 caught kernel: Inspecting /boot/System.map-2.6.5-63077cl
May 12 07:40:02 caught syslog: klogd startup succeeded
May 12 07:40:02 caught kernel: Loaded 29534 symbols from /boot/System.map-2.6.5-63077cl.
May 12 07:40:02 caught kernel: Symbols match kernel version 2.6.5.
May 12 07:40:02 caught kernel: No module symbols loaded - kernel modules not enabled.
May 12 07:40:02 caught kernel: Linux version 2.6.5-63077cl ([email protected]) (gcc version 3.3.3 (release)) #1 Thu Jun 17 20:05:07 BRT 2004
May 12 07:40:02 caught kernel: BIOS-provided physical RAM map:
May 12 07:40:02 caught kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
May 12 07:40:02 caught kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
May 12 07:40:02 caught kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
May 12 07:40:02 caught kernel: BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
May 12 07:40:02 caught kernel: BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
May 12 07:40:02 caught kernel: BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
May 12 07:40:02 caught kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
May 12 07:40:02 caught kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
May 12 07:40:02 caught kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
May 12 07:40:02 caught kernel: Warning only 896MB will be used.
May 12 07:40:02 caught kernel: Use a HIGHMEM enabled kernel.
May 12 07:40:02 caught kernel: 896MB LOWMEM available.
May 12 07:40:02 caught kernel: On node 0 totalpages: 229376
May 12 07:40:02 caught kernel: DMA zone: 4096 pages, LIFO batch:1
May 12 07:40:02 caught kernel: Normal zone: 225280 pages, LIFO batch:16
May 12 07:40:02 caught kernel: HighMem zone: 0 pages, LIFO batch:1
May 12 07:40:02 caught kernel: DMI 2.3 present.
May 12 07:40:02 caught kernel: ACPI: RSDP (v000 ASUS ) @ 0x000f5710
May 12 07:40:02 caught kernel: ACPI: RSDT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
May 12 07:40:02 caught kernel: ACPI: FADT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc0c0
May 12 07:40:02 caught kernel: ACPI: BOOT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc030
May 12 07:40:02 caught kernel: ACPI: MADT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc058
May 12 07:40:02 caught kernel: ACPI: DSDT (v001 ASUS P4S800 0x00001000 MSFT 0x0100000b) @ 0x00000000
May 12 07:40:02 caught kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May 12 07:40:02 caught kernel: Processor #0 15:3 APIC version 20
May 12 07:40:02 caught kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
May 12 07:40:02 caught kernel: Processor #1 15:3 APIC version 20
May 12 07:40:02 caught kernel: WARNING: NR_CPUS limit of 1 reached. Processor ignored.
May 12 07:40:02 caught kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
May 12 07:40:02 caught kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
May 12 07:40:02 caught kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
May 12 07:40:02 caught kernel: IOAPIC[0]: Assigned apic_id 2
May 12 07:40:02 caught kernel: IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
May 12 07:40:02 caught kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
May 12 07:40:02 caught kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
May 12 07:40:02 caught kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
May 12 07:40:02 caught kernel: Using ACPI (MADT) for SMP configuration information
May 12 07:40:02 caught kernel: Built 1 zonelists
May 12 07:40:02 caught kernel: Kernel command line: root=/dev/hda1 vga=0x317 splash=silent 5
May 12 07:40:02 caught random: Iniciando gerador de números aleatórios: succeeded
May 12 07:40:02 caught kernel: bootsplash: silent mode.
May 12 07:40:02 caught kernel: Initializing CPU#0
May 12 07:40:02 caught kernel: PID hash table entries: 4096 (order 12: 32768 bytes)
May 12 07:40:02 caught kernel: Detected 3000.173 MHz processor.
May 12 07:40:02 caught kernel: Using tsc for high-res timesource
May 12 07:40:02 caught kernel: Console: colour dummy device 80x25
May 12 07:40:02 caught kernel: Memory: 903988k/917504k available (1768k kernel code, 12756k reserved, 876k data, 312k init, 0k highmem)
May 12 07:40:02 caught kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
May 12 07:40:02 caught kernel: Calibrating delay loop... 5931.00 BogoMIPS
May 12 07:40:02 caught kernel: Security Scaffold v1.0.0 initialized
May 12 07:40:02 caught kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 12 07:40:02 caught kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 12 07:40:02 caught kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
May 12 07:40:02 caught kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
May 12 07:40:02 caught kernel: Freeing initrd memory: 435k freed
May 12 07:40:02 caught kernel: monitor/mwait feature present.
May 12 07:40:02 caught kernel: using mwait in idle threads.
May 12 07:40:02 caught kernel: CPU: Trace cache: 12K uops
May 12 07:40:02 caught kernel: CPU: L2 cache: 1024K
May 12 07:40:02 caught kernel: Intel machine check architecture supported.
May 12 07:40:02 caught kernel: Intel machine check reporting enabled on CPU#0.
May 12 07:40:02 caught kernel: CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
May 12 07:40:02 caught kernel: CPU#0: Thermal monitoring enabled
May 12 07:40:02 caught kernel: CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
May 12 07:40:02 caught kernel: Enabling fast FPU save and restore... done.
May 12 07:40:02 caught kernel: Enabling unmasked SIMD FPU exception support... done.
May 12 07:40:02 caught kernel: Checking 'hlt' instruction... OK.
May 12 07:40:02 caught kernel: POSIX conformance testing by UNIFIX
May 12 07:40:02 caught kernel: enabled ExtINT on CPU#0
May 12 07:40:02 caught kernel: ESR value before enabling vector: 00000000
May 12 07:40:02 caught kernel: ESR value after enabling vector: 00000000
May 12 07:40:02 caught kernel: ENABLING IO-APIC IRQs
May 12 07:40:02 caught kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
May 12 07:40:02 caught kernel: Using local APIC timer interrupts.
May 12 07:40:02 caught kernel: calibrating APIC timer ...
May 12 07:40:02 caught kernel: ..... CPU clock speed is 2999.0583 MHz.
May 12 07:40:02 caught kernel: ..... host bus clock speed is 199.0972 MHz.
May 12 07:40:02 caught kernel: NET: Registered protocol family 16
May 12 07:40:02 caught kernel: EISA bus registered
May 12 07:40:02 caught kernel: PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1
May 12 07:40:02 caught kernel: PCI: Using configuration type 1
May 12 07:40:02 caught kernel: mtrr: v2.0 (20020519)
May 12 07:40:02 caught kernel: ACPI: Subsystem revision 20040326
May 12 07:40:02 caught kernel: ACPI: Interpreter enabled
May 12 07:40:02 caught kernel: ACPI: Using IOAPIC for interrupt routing
May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
May 12 07:40:02 caught kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
May 12 07:40:02 caught kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
May 12 07:40:02 caught kernel: PCI: Probing PCI hardware (bus 00)
May 12 07:40:02 caught kernel: Enabling SiS 96x SMBus.
May 12 07:40:02 caught kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
May 12 07:40:02 caught kernel: drivers/usb/core/usb.c: registered new driver usbfs
May 12 07:40:02 caught kernel: drivers/usb/core/usb.c: registered new driver hub
May 12 07:40:02 caught kernel: testing the IO APIC.......................
May 12 07:40:02 caught kernel: .................................... done.
May 12 07:40:02 caught kernel: PCI: Using ACPI for IRQ routing
May 12 07:40:02 caught kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
May 12 07:40:02 caught kernel: vesafb: framebuffer at 0xfc000000, mapped to 0xf8809000, size 4096k
May 12 07:40:02 caught kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=0
May 12 07:40:02 caught kernel: vesafb: protected mode interface info at c000:0336
May 12 07:40:02 caught kernel: vesafb: scrolling: redraw
May 12 07:40:02 caught kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
May 12 07:40:02 caught kernel: fb0: VESA VGA frame buffer device
May 12 07:40:02 caught kernel: Simple Boot Flag at 0x3a set to 0x1
May 12 07:40:02 caught kernel: Machine check exception polling timer started.
May 12 07:40:02 caught kernel: Total HugeTLB memory allocated, 0
May 12 07:40:02 caught kernel: ikconfig 0.7 with /proc/config*
May 12 07:40:02 caught kernel: VFS: Disk quotas dquot_6.5.1
May 12 07:40:02 caught kernel: Initializing Cryptographic API
May 12 07:40:02 caught kernel: isapnp: Scanning for PnP cards...
May 12 07:40:02 caught kernel: isapnp: No Plug & Play device found
May 12 07:40:02 caught kernel: bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 23674 bytes, found (1024x768, 18444 bytes, v3).
May 12 07:40:02 caught kernel: Console: switching to colour frame buffer device 128x38
May 12 07:40:02 caught kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
May 12 07:40:02 caught kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 12 07:40:02 caught kernel: Using anticipatory io scheduler
May 12 07:40:02 caught kernel: Floppy drive(s): fd0 is 1.44M
May 12 07:40:02 caught kernel: FDC 0 is a post-1991 82077
May 12 07:40:02 caught kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
May 12 07:40:02 caught kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
May 12 07:40:02 caught kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 12 07:40:02 caught kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5
May 12 07:40:02 caught kernel: SIS5513: chipset revision 0
May 12 07:40:02 caught kernel: SIS5513: not 100%% native mode: will probe irqs later
May 12 07:40:02 caught kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
May 12 07:40:02 caught kernel: ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
May 12 07:40:02 caught kernel: ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
May 12 07:40:02 caught kernel: hda: Maxtor 6Y120L0, ATA DISK drive
May 12 07:40:02 caught kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 12 07:40:02 caught kernel: hdc: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive
May 12 07:40:02 caught kernel: hdd: ATAPI-CD ROM-DRIVE-56MAX, ATAPI CD/DVD-ROM drive
May 12 07:40:02 caught kernel: ide1 at 0x170-0x177,0x376 on irq 15
May 12 07:40:02 caught kernel: hda: max request size: 128KiB
May 12 07:40:02 caught kernel: hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
May 12 07:40:02 caught kernel: hda: hda1 hda2
May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.0: irq 169, pci mem f8c17000
May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
May 12 07:40:02 caught kernel: hub 1-0:1.0: USB hub found
May 12 07:40:02 caught kernel: hub 1-0:1.0: 3 ports detected
May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.1: irq 209, pci mem f8c19000
May 12 07:40:02 caught kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
May 12 07:40:02 caught kernel: hub 2-0:1.0: USB hub found
May 12 07:40:02 caught kernel: hub 2-0:1.0: 3 ports detected
May 12 07:40:02 caught kernel: USB Universal Host Controller Interface driver v2.2
May 12 07:40:02 caught kernel: drivers/usb/core/usb.c: registered new driver hiddev
May 12 07:40:02 caught kernel: drivers/usb/core/usb.c: registered new driver hid
May 12 07:40:02 caught kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
May 12 07:40:02 caught kernel: mice: PS/2 mouse device common for all mice
May 12 07:40:02 caught kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
May 12 07:40:02 caught kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
May 12 07:40:02 caught kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
May 12 07:40:02 caught kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
May 12 07:40:02 caught kernel: EISA: Probing bus 0 at eisa0
May 12 07:40:02 caught kernel: EISA: Detected 0 cards.
May 12 07:40:02 caught kernel: NET: Registered protocol family 2
May 12 07:40:02 caught kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
May 12 07:40:02 caught kernel: TCP: Hash tables configured (established 262144 bind 65536)
May 12 07:40:02 caught kernel: NET: Registered protocol family 1
May 12 07:40:02 caught kernel: NET: Registered protocol family 17
May 12 07:40:02 caught kernel: NET: Registered protocol family 8
May 12 07:40:02 caught kernel: NET: Registered protocol family 20
May 12 07:40:02 caught kernel: ACPI: (supports S0 S1 S4 S5)
May 12 07:40:02 caught kernel: md: Autodetecting RAID arrays.
May 12 07:40:02 caught kernel: md: autorun ...
May 12 07:40:02 caught kernel: md: ... autorun DONE.
May 12 07:40:02 caught kernel: RAMDISK: Compressed image found at block 0
May 12 07:40:02 caught kernel: VFS: Mounted root (minix filesystem).
May 12 07:40:02 caught kernel: found reiserfs format "3.6" with standard journal
May 12 07:40:02 caught kernel: reiserfs: using ordered data mode
May 12 07:40:02 caught kernel: Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
May 12 07:40:02 caught kernel: reiserfs: checking transaction log (hda1) for (hda1)
May 12 07:40:02 caught kernel: Using r5 hash to sort names
May 12 07:40:02 caught kernel: Freeing unused kernel memory: 312k freed
May 12 07:40:02 caught kernel: Real Time Clock Driver v1.12
May 12 07:40:02 caught kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
May 12 07:40:02 caught kernel: ts: Compaq touchscreen protocol output
May 12 07:40:02 caught kernel: input: PC Speaker
May 12 07:40:02 caught kernel: ALSA sound/pci/ac97/ac97_codec.c:1835: AC'97 0 analog subsections not ready
May 12 07:40:02 caught kernel: intel8x0_measure_ac97_clock: measured 49405 usecs
May 12 07:40:02 caught kernel: intel8x0: clocking to 48000
May 12 07:40:02 caught kernel: kjournald starting. Commit interval 5 seconds
May 12 07:40:02 caught kernel: EXT3 FS on hda2, internal journal
May 12 07:40:02 caught kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 12 07:40:02 caught kernel: Supermount version 2.0.4 for kernel 2.6
May 12 07:40:02 caught kernel: Linux agpgart interface v0.100 (c) Dave Jones
May 12 07:40:02 caught kernel: agpgart: Detected SiS 648 chipset
May 12 07:40:02 caught kernel: agpgart: Maximum main memory to use for agp memory: 816M
May 12 07:40:02 caught kernel: agpgart: AGP aperture is 64M @ 0xf4000000
May 12 07:40:02 caught kernel: ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
May 12 07:40:02 caught kernel: ehci_hcd 0000:00:03.3: irq 225, pci mem f8d78000
May 12 07:40:02 caught kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
May 12 07:40:02 caught kernel: PCI: cache line size of 128 is not supported by device 0000:00:03.3
May 12 07:40:02 caught kernel: ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
May 12 07:40:02 caught kernel: hub 3-0:1.0: USB hub found
May 12 07:40:02 caught kernel: hub 3-0:1.0: 6 ports detected
May 12 07:40:02 caught kernel: Linux Kernel Card Services
May 12 07:40:02 caught kernel: options: [pci] [cardbus] [pm]
May 12 07:40:02 caught kernel: Intel ISA PCIC probe: not found.
May 12 07:40:02 caught kernel: Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
May 12 07:40:02 caught kernel: eth0: ADMtek Comet rev 17 at 0xf8dab000, 00:50:BF:AA:89:A0, IRQ 185.
May 12 07:40:03 caught netfs: Montando outros sistemas de arquivos: succeeded
May 12 07:40:03 caught atd: atd startup succeeded
May 12 07:40:03 caught crond: crond startup succeeded
May 12 07:40:02 caught sysctl: net.ipv4.ip_forward = 0
May 12 07:40:02 caught sysctl: net.ipv4.conf.all.rp_filter = 1
May 12 07:40:02 caught sysctl: net.ipv4.conf.default.rp_filter = 1
May 12 07:40:02 caught sysctl: kernel.sysrq = 1
May 12 07:40:02 caught sysctl: net.ipv4.conf.all.log_martians = 1
May 12 07:40:02 caught sysctl: net.ipv4.ip_dynaddr = 0
May 12 07:40:02 caught sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
May 12 07:40:02 caught sysctl: net.ipv4.conf.all.accept_source_route = 0
May 12 07:40:02 caught sysctl: net.ipv4.icmp_echo_ignore_all = 0
May 12 07:40:02 caught sysctl: net.ipv4.icmp_ratemask = 6169
May 12 07:40:02 caught sysctl: net.ipv4.icmp_ratelimit = 100
May 12 07:40:02 caught sysctl: net.ipv4.tcp_syncookies = 1
May 12 07:40:02 caught sysctl: net.ipv4.conf.all.accept_redirects = 0
May 12 07:40:02 caught network: Configurando parâmetros de rede: succeeded
May 12 07:40:02 caught network: Levantando interface lo: succeeded
May 12 07:40:02 caught network: Bringing up interface eth0: succeeded
May 12 07:40:02 caught portmap: portmap startup succeeded
May 12 07:40:04 caught kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
May 12 07:40:04 caught kernel: parport0: irq 7 detected
May 12 07:40:04 caught kernel: lp0: using parport0 (polling).
May 12 07:40:04 caught kernel: lp0: console ready
May 12 07:40:04 caught cups: cupsd startup succeeded
May 12 07:40:04 caught gpm[2068]: *** info [startup.c(150)]:
May 12 07:40:04 caught gpm[2068]: Started gpm successfully. Entered daemon mode.
May 12 07:40:05 caught gpm: gpm startup succeeded
May 12 07:40:05 caught anacron[2123]: Anacron 2.3 started on 2005-05-12
May 12 07:40:05 caught anacron: anacron startup succeeded
May 12 07:40:05 caught anacron[2123]: Will run job `cron.daily' in 5 min.
May 12 07:40:05 caught anacron[2123]: Will run job `cron.weekly' in 10 min.
May 12 07:40:05 caught anacron[2123]: Will run job `cron.monthly' in 15 min.
May 12 07:40:05 caught anacron[2123]: Jobs will be executed sequentially
May 12 07:40:05 caught kernel: bootsplash: status on console 0 changed to on
May 12 07:40:05 caught kernel: bootsplash: freeing silent jpeg
May 12 07:40:05 caught kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
May 12 07:40:05 caught kernel: apm: overridden by ACPI.
May 12 07:40:06 caught modprobe: FATAL: Error inserting apm (/lib/modules/2.6.5-63077cl/kernel/arch/i386/kernel/apm.ko): No such device
May 12 07:40:06 caught kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
May 12 07:40:06 caught kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
May 12 07:40:06 caught kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
May 12 07:40:06 caught kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
May 12 07:40:51 caught kde(pam_unix)[2174]: session opened for user sysop by (uid=0)
May 12 07:41:06 caught kernel: hdc: ATAPI 52X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
May 12 07:41:06 caught kernel: Uniform CD-ROM driver Revision: 3.20
May 12 07:41:06 caught kernel: hdd: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
May 12 07:42:21 caught kernel: usb 2-1: new full speed USB device using address 2
May 12 07:43:51 caught kernel: usb 2-1: USB disconnect, address 2
May 12 07:45:05 caught anacron[2123]: Job `cron.daily' started
May 12 07:45:05 caught anacron[2349]: Updated timestamp for job `cron.daily' to 2005-05-12
May 12 07:45:07 caught kernel: end_request: I/O error, dev fd0, sector 0
May 12 07:45:07 caught last message repeated 2 times
May 12 07:45:22 caught anacron[2123]: Job `cron.daily' terminated
May 12 07:50:05 caught anacron[2123]: Job `cron.weekly' started
May 12 07:50:05 caught anacron[2413]: Updated timestamp for job `cron.weekly' to 2005-05-12
May 12 07:51:02 caught anacron[2123]: Job `cron.weekly' terminated
May 12 07:55:05 caught anacron[2123]: Job `cron.monthly' started
May 12 07:55:05 caught anacron[2123]: Job `cron.monthly' terminated
May 12 07:55:05 caught anacron[2123]: Normal exit (3 jobs run)
May 12 07:55:05 caught anacron[8394]: Updated timestamp for job `cron.monthly' to 2005-05-12
May 12 08:23:57 caught gconfd (sysop-8433): iniciando (versão 2.6.1), pid 8433 usuário 'sysop'
May 12 08:23:57 caught gconfd (sysop-8433): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
May 12 08:23:57 caught gconfd (sysop-8433): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
May 12 08:23:57 caught gconfd (sysop-8433): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
May 12 08:28:27 caught gconfd (sysop-8433): O servidor GConf não está sendo usado, desligando.
May 12 08:28:27 caught gconfd (sysop-8433): Terminando
May 12 08:32:34 caught su(pam_unix)[8509]: session opened for user root by (uid=500)
May 12 08:32:34 caught su(pam_unix)[8509]: session closed for user root
May 12 08:32:34 caught su(pam_unix)[8514]: session opened for user root by (uid=500)
May 12 08:32:34 caught kernel: Capability LSM initialized
May 12 08:32:34 caught webmin: startup succeeded
May 12 08:32:34 caught su(pam_unix)[8514]: session closed for user root
May 12 08:33:39 caught network: Desligando interface eth0: succeeded
May 12 08:33:39 caught sysctl: net.ipv4.ip_forward = 0
May 12 08:33:39 caught sysctl: net.ipv4.conf.all.rp_filter = 1
May 12 08:33:39 caught sysctl: net.ipv4.conf.default.rp_filter = 1
May 12 08:33:39 caught sysctl: kernel.sysrq = 1
May 12 08:33:39 caught sysctl: net.ipv4.conf.all.log_martians = 1
May 12 08:33:39 caught sysctl: net.ipv4.ip_dynaddr = 0
May 12 08:33:39 caught sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
May 12 08:33:39 caught sysctl: net.ipv4.conf.all.accept_source_route = 0
May 12 08:33:39 caught sysctl: net.ipv4.icmp_echo_ignore_all = 0
May 12 08:33:39 caught sysctl: net.ipv4.icmp_ratemask = 6169
May 12 08:33:39 caught sysctl: net.ipv4.icmp_ratelimit = 100
May 12 08:33:39 caught sysctl: net.ipv4.tcp_syncookies = 1
May 12 08:33:39 caught sysctl: net.ipv4.conf.all.accept_redirects = 0
May 12 08:33:39 caught network: Configurando parâmetros de rede: succeeded
May 12 08:33:39 caught network: Levantando interface lo: succeeded
May 12 08:33:39 caught network: Bringing up interface eth0: succeeded
May 12 08:33:43 caught network: Desligando interface eth0: succeeded
May 12 08:33:43 caught sysctl: net.ipv4.ip_forward = 0
May 12 08:33:43 caught sysctl: net.ipv4.conf.all.rp_filter = 1
May 12 08:33:43 caught sysctl: net.ipv4.conf.default.rp_filter = 1
May 12 08:33:43 caught sysctl: kernel.sysrq = 1
May 12 08:33:43 caught sysctl: net.ipv4.conf.all.log_martians = 1
May 12 08:33:43 caught sysctl: net.ipv4.ip_dynaddr = 0
May 12 08:33:43 caught sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
May 12 08:33:43 caught sysctl: net.ipv4.conf.all.accept_source_route = 0
May 12 08:33:43 caught sysctl: net.ipv4.icmp_echo_ignore_all = 0
May 12 08:33:43 caught sysctl: net.ipv4.icmp_ratemask = 6169
May 12 08:33:43 caught sysctl: net.ipv4.icmp_ratelimit = 100
May 12 08:33:43 caught sysctl: net.ipv4.tcp_syncookies = 1
May 12 08:33:43 caught sysctl: net.ipv4.conf.all.accept_redirects = 0
May 12 08:33:43 caught network: Configurando parâmetros de rede: succeeded
May 12 08:33:43 caught network: Levantando interface lo: succeeded
May 12 08:33:43 caught network: Bringing up interface eth0: succeeded
May 12 09:02:38 caught gconfd (sysop-9495): iniciando (versão 2.6.1), pid 9495 usuário 'sysop'
May 12 09:02:38 caught gconfd (sysop-9495): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
May 12 09:02:38 caught gconfd (sysop-9495): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
May 12 09:02:38 caught gconfd (sysop-9495): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
May 12 09:05:08 caught gconfd (sysop-9495): O servidor GConf não está sendo usado, desligando.
May 12 09:05:08 caught gconfd (sysop-9495): Terminando
May 12 09:19:04 caught su(pam_unix)[9560]: session opened for user root by sysop(uid=500)
May 12 09:23:17 caught cups: cupsd shutdown succeeded
May 12 09:23:18 caught cups: cupsd startup succeeded
May 12 09:23:31 caught gconfd (root-9776): iniciando (versão 2.6.1), pid 9776 usuário 'root'
May 12 09:23:31 caught gconfd (root-9776): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
May 12 09:23:31 caught gconfd (root-9776): Endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
May 12 09:23:31 caught gconfd (root-9776): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
May 12 09:23:34 caught gconfd (root-9776): Terminando
May 12 09:24:36 caught gconfd (sysop-9926): iniciando (versão 2.6.1), pid 9926 usuário 'sysop'
May 12 09:24:37 caught gconfd (sysop-9926): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
May 12 09:24:37 caught gconfd (sysop-9926): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
May 12 09:24:37 caught gconfd (sysop-9926): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
May 12 09:24:44 caught webmin: shutdown succeeded
May 12 09:24:45 caught webmin: startup succeeded
May 12 09:24:48 caught webmin: shutdown succeeded
May 12 09:24:48 caught webmin: startup succeeded
May 12 09:24:53 caught webmin: shutdown succeeded
May 12 09:24:54 caught webmin: startup succeeded
May 12 09:28:07 caught gconfd (sysop-9926): O servidor GConf não está sendo usado, desligando.
May 12 09:28:07 caught gconfd (sysop-9926): Terminando
May 12 09:32:01 caught kernel: Kernel logging (proc) stopped.
May 12 09:32:01 caught kernel: Kernel log daemon terminating.
May 12 09:32:02 caught syslog: klogd shutdown succeeded
May 12 09:32:02 caught exiting on signal 15
May 12 09:32:02 lablinux syslogd 1.4.1: restart.
May 12 09:32:02 lablinux syslog: syslogd startup succeeded
May 12 09:32:02 lablinux kernel: klogd 1.4.1, log source = /proc/kmsg started.
May 12 09:32:02 lablinux kernel: Inspecting /boot/System.map-2.6.5-63077cl
May 12 09:32:02 lablinux syslog: klogd startup succeeded
May 12 09:32:03 lablinux kernel: Loaded 29534 symbols from /boot/System.map-2.6.5-63077cl.
May 12 09:32:03 lablinux kernel: Symbols match kernel version 2.6.5.
May 12 09:32:03 lablinux kernel: No module symbols loaded - kernel modules not enabled.
May 12 09:32:02 lablinux syslog: syslogd shutdown succeeded
May 12 09:32:34 lablinux su(pam_unix)[9560]: session closed for user root
May 12 10:00:31 lablinux gconfd (sysop-10751): iniciando (versão 2.6.1), pid 10751 usuário 'sysop'
May 12 10:00:31 lablinux gconfd (sysop-10751): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
May 12 10:00:31 lablinux gconfd (sysop-10751): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
May 12 10:00:31 lablinux gconfd (sysop-10751): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
May 12 10:04:01 lablinux gconfd (sysop-10751): O servidor GConf não está sendo usado, desligando.
May 12 10:04:01 lablinux gconfd (sysop-10751): Terminando
May 12 10:05:08 lablinux gconfd (sysop-10876): iniciando (versão 2.6.1), pid 10876 usuário 'sysop'
May 12 10:05:08 lablinux gconfd (sysop-10876): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
May 12 10:05:08 lablinux gconfd (sysop-10876): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
May 12 10:05:08 lablinux gconfd (sysop-10876): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
May 12 10:05:38 lablinux gconfd (sysop-10876): O servidor GConf não está sendo usado, desligando.
May 12 10:05:38 lablinux gconfd (sysop-10876): Terminando
May 12 10:08:03 lablinux su(pam_unix)[10902]: session opened for user root by sysop(uid=500)
May 12 10:08:41 lablinux gconfd (sysop-10925): iniciando (versão 2.6.1), pid 10925 usuário 'sysop'
May 12 10:08:41 lablinux gconfd (sysop-10925): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
May 12 10:08:41 lablinux gconfd (sysop-10925): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
May 12 10:08:41 lablinux gconfd (sysop-10925): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
May 12 10:15:43 lablinux network: Desligando interface eth0: succeeded
May 12 10:15:43 lablinux sysctl: net.ipv4.ip_forward = 0
May 12 10:15:43 lablinux sysctl: net.ipv4.conf.all.rp_filter = 1
May 12 10:15:43 lablinux sysctl: net.ipv4.conf.default.rp_filter = 1
May 12 10:15:43 lablinux sysctl: kernel.sysrq = 1
May 12 10:15:43 lablinux sysctl: net.ipv4.conf.all.log_martians = 1
May 12 10:15:43 lablinux sysctl: net.ipv4.ip_dynaddr = 0
May 12 10:15:43 lablinux sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
May 12 10:15:43 lablinux sysctl: net.ipv4.conf.all.accept_source_route = 0
May 12 10:15:43 lablinux sysctl: net.ipv4.icmp_echo_ignore_all = 0
May 12 10:15:43 lablinux sysctl: net.ipv4.icmp_ratemask = 6169
May 12 10:15:43 lablinux sysctl: net.ipv4.icmp_ratelimit = 100
May 12 10:15:43 lablinux sysctl: net.ipv4.tcp_syncookies = 1
May 12 10:15:43 lablinux sysctl: net.ipv4.conf.all.accept_redirects = 0
May 12 10:15:43 lablinux network: Configurando parâmetros de rede: succeeded
May 12 10:15:43 lablinux network: Levantando interface lo: succeeded
May 12 10:15:43 lablinux network: Bringing up interface eth0: succeeded
May 12 10:16:27 lablinux su(pam_unix)[10902]: session closed for user root
May 12 10:16:56 lablinux su(pam_unix)[11646]: session opened for user root by sysop(uid=500)
May 12 10:32:40 lablinux named[11753]: starting BIND 9.2.3 -u named -t /var/named
May 12 10:32:40 lablinux named[11753]: using 1 CPU
May 12 10:32:40 lablinux named[11753]: loading configuration from '/etc/named.conf'
May 12 10:32:40 lablinux named[11753]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
May 12 10:32:40 lablinux named[11753]: no IPv6 interfaces found
May 12 10:32:40 lablinux named[11753]: listening on IPv4 interface lo, 127.0.0.1#53
May 12 10:32:40 lablinux named[11753]: listening on IPv4 interface eth0, 192.168.0.254#53
May 12 10:32:40 lablinux named[11753]: command channel listening on 127.0.0.1#953
May 12 10:32:40 lablinux named[11753]: couldn't open pid file '/var/run/named/named.pid': Permission denied
May 12 10:32:40 lablinux named[11753]: exiting (due to early fatal error)
May 12 10:34:06 lablinux su(pam_unix)[11646]: session closed for user root
May 12 10:39:14 lablinux named[12005]: starting BIND 9.2.3 -u named -t /var/named
May 12 10:39:14 lablinux named[12005]: using 1 CPU
May 12 10:39:14 lablinux named[12005]: loading configuration from '/etc/named.conf'
May 12 10:39:14 lablinux named[12005]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
May 12 10:39:14 lablinux named[12005]: no IPv6 interfaces found
May 12 10:39:14 lablinux named[12005]: listening on IPv4 interface lo, 127.0.0.1#53
May 12 10:39:14 lablinux named[12005]: listening on IPv4 interface eth0, 192.168.0.254#53
May 12 10:39:14 lablinux named[12005]: command channel listening on 127.0.0.1#953
May 12 10:39:14 lablinux named[12005]: couldn't open pid file '/var/run/named/named.pid': Permission denied
May 12 10:39:14 lablinux named[12005]: exiting (due to early fatal error)
May 12 10:40:57 lablinux named[12605]: starting BIND 9.2.3 -u named -t /var/named
May 12 10:40:57 lablinux named[12605]: using 1 CPU
May 12 10:40:57 lablinux named[12605]: loading configuration from '/etc/named.conf'
May 12 10:40:57 lablinux named[12605]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
May 12 10:40:57 lablinux named[12605]: no IPv6 interfaces found
May 12 10:40:57 lablinux named[12605]: listening on IPv4 interface lo, 127.0.0.1#53
May 12 10:40:57 lablinux named[12605]: listening on IPv4 interface eth0, 192.168.0.254#53
May 12 10:40:57 lablinux named[12605]: command channel listening on 127.0.0.1#953
May 12 10:40:57 lablinux named[12605]: couldn't open pid file '/var/run/named/named.pid': Permission denied
May 12 10:40:57 lablinux named[12605]: exiting (due to early fatal error)
May 12 10:51:48 lablinux su(pam_unix)[12647]: session opened for user root by sysop(uid=500)
May 12 11:00:11 lablinux gconfd (sysop-10925): O servidor GConf não está sendo usado, desligando.
May 12 11:00:11 lablinux gconfd (sysop-10925): Terminando
May 12 11:00:13 lablinux su(pam_unix)[12647]: session closed for user root
May 12 11:39:51 lablinux gconfd (sysop-12731): iniciando (versão 2.6.1), pid 12731 usuário 'sysop'
May 12 11:39:52 lablinux gconfd (sysop-12731): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
May 12 11:39:52 lablinux gconfd (sysop-12731): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
May 12 11:39:52 lablinux gconfd (sysop-12731): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
May 12 11:43:56 lablinux su(pam_unix)[12745]: session opened for user root by sysop(uid=500)
May 12 11:44:26 lablinux named[12772]: starting BIND 9.2.3 -u named -t /var/named
May 12 11:44:26 lablinux named[12772]: using 1 CPU
May 12 11:44:26 lablinux named[12772]: loading configuration from '/etc/named.conf'
May 12 11:44:26 lablinux named[12772]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
May 12 11:44:26 lablinux named[12772]: no IPv6 interfaces found
May 12 11:44:26 lablinux named[12772]: listening on IPv4 interface lo, 127.0.0.1#53
May 12 11:44:26 lablinux named[12772]: listening on IPv4 interface eth0, 192.168.0.254#53
May 12 11:44:26 lablinux named[12772]: command channel listening on 127.0.0.1#953
May 12 11:44:26 lablinux named[12772]: couldn't open pid file '/var/run/named/named.pid': Permission denied
May 12 11:44:26 lablinux named[12772]: exiting (due to early fatal error)
May 12 11:45:27 lablinux named: named shutdown failed
May 12 11:45:27 lablinux named[12864]: starting BIND 9.2.3 -u named -t /var/named
May 12 11:45:27 lablinux named[12864]: using 1 CPU
May 12 11:45:27 lablinux named[12864]: loading configuration from '/etc/named.conf'
May 12 11:45:27 lablinux named[12864]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
May 12 11:45:27 lablinux named[12864]: no IPv6 interfaces found
May 12 11:45:27 lablinux named[12864]: listening on IPv4 interface lo, 127.0.0.1#53
May 12 11:45:27 lablinux named[12864]: listening on IPv4 interface eth0, 192.168.0.254#53
May 12 11:45:27 lablinux named[12864]: command channel listening on 127.0.0.1#953
May 12 11:45:27 lablinux named[12864]: couldn't open pid file '/var/run/named/named.pid': Permission denied
May 12 11:45:27 lablinux named[12864]: exiting (due to early fatal error)
May 12 11:48:46 lablinux su(pam_unix)[12745]: session closed for user root
May 12 11:48:52 lablinux gconfd (sysop-12731): O servidor GConf não está sendo usado, desligando.
May 12 11:48:52 lablinux gconfd (sysop-12731): Terminando
May 12 11:53:50 lablinux gconfd (sysop-12966): iniciando (versão 2.6.1), pid 12966 usuário 'sysop'
May 12 11:53:50 lablinux gconfd (sysop-12966): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração somente leitura na posição 0
May 12 11:53:50 lablinux gconfd (sysop-12966): Endereço "xml:readwrite:/home/sysop/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 1
May 12 11:53:50 lablinux gconfd (sysop-12966): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração somente leitura na posição 2
May 12 11:55:43 lablinux su(pam_unix)[12975]: session opened for user root by sysop(uid=500)
May 12 12:01:08 lablinux su(pam_unix)[12990]: authentication failure; logname=sysop uid=500 euid=0 tty= ruser=sysop rhost= user=root
May 12 12:01:18 lablinux su(pam_unix)[12992]: session opened for user root by sysop(uid=500)
tá sim cara o named não é o BIND??Citação:
Postado originalmente por nod3vic3
[root@lablinux sysop]# apt-get install bind
Lendo Listas de Pacotes... Feito
Construindo Árvore de Dependências... Feito
bind já está na versão mais nova.
0 atualizados, 0 novos instalados, 0 removidos e 2 não atualizados.
[root@lablinux sysop]#
[root@lablinux sysop]#
Cara verifica aí se teu named tá instalado direitinho... se estiver tem que ver esse erro aqui ó
May 12 11:45:27 lablinux named[12864]: couldn't open pid file '/var/run/named/named.pid': Permission denied
onde eu vejo isso? No arquivo /var/log/messages?Citação:
Postado originalmente por nod3vic3
em /var/run não existe a pasta named, eu vi láCitação:
Postado originalmente por jrctec
Apareceu isso aqui: no /ver/log/messagesCitação:
Postado originalmente por nod3vic3
May 12 12:17:10 lablinux named[13707]: starting BIND 9.2.3 -u named -t /var/named
May 12 12:17:10 lablinux named[13707]: using 1 CPU
May 12 12:17:10 lablinux named[13707]: loading configuration from '/etc/named.conf'
May 12 12:17:10 lablinux named[13707]: /etc/named.conf:15: option 'memstatistics-file' is not implemented
May 12 12:17:10 lablinux named[13707]: no IPv6 interfaces found
May 12 12:17:10 lablinux named[13707]: listening on IPv4 interface lo, 127.0.0.1#53
May 12 12:17:10 lablinux named[13707]: listening on IPv4 interface eth0, 192.168.0.254#53
May 12 12:17:10 lablinux named[13707]: command channel listening on 127.0.0.1#953
May 12 12:17:10 lablinux named[13707]: couldn't open pid file '/var/run/named/named.pid': Permission denied
May 12 12:17:10 lablinux named[13707]: exiting (due to early fatal error)
apareceu o erro sim como eu faço então?Citação:
Postado originalmente por jrctec
cara, o named deve estar no /sbin ou no /usr/sbin, e ambos os diretórios devem estar fora do seu path.
verifica se está lá, mas de qquer forma o erro é dito acima. Manda umCódigo :
chown named.named /var/run/named
olha o que deu:Citação:
Postado originalmente por 354mp
[root@lablinux sysop]# chown named.named /var/run/named
chown: impossível acessar `/var/run/named': Arquivo ou diretório não encontrado
ou vc tem msn??Citação:
Postado originalmente por 354mp
foi mal, faltou o -RCódigo :
chown -R named.named /var/run/named/
deu a mesma coisa, não existe o diretório named em /var/runCitação:
Postado originalmente por 354mp
[root@lablinux sysop]# chown -R named.named /var/run/named/
chown: impossível acessar `/var/run/named/': Arquivo ou diretório não encontrado
[root@lablinux sysop]#
execute o mesmo comando em /var/named,, o seu bind está enjaulado, ou seja, ele funciona como se a raiz fosse o dir /var/named.Código :
chown -R named.named /var/named
eu dei um whereis named e achou ele em /usr/binCitação:
Postado originalmente por jrctec
[root@lablinux sysop]# whereis named
named: /usr/sbin/named /etc/named.conf /etc/named.conf~ /usr/share/man/man8/named.8.gz
[root@lablinux sysop]#
mas eu dou um /usr/bin/named -g e ele diz arquivo não encontrado
[root@lablinux sysop]# /usr/bin/named -g
bash: /usr/bin/named: Arquivo ou diretório não encontrado
[root@lablinux sysop]#
será que não é diferente no conectiva 10 não??
então eu dei o comando não deu nenhuma mensagem, foi como se ele tivesse aceitado o comandoCitação:
Postado originalmente por 354mp
[root@lablinux sysop]# chown -R named.named /var/named/
[root@lablinux sysop]#
inicia o bind e ve o resultado...
que isso cara iniciou!!!!!Citação:
Postado originalmente por 354mp
vc é fera, po brigado cara vc ficou um tempão me dando idéia e eu te enchendo o saco, valeu mesmo.
Falou meu amigo, estou às ordens... :good:
Ele iniciou, como faço pra saber se esta funcionando certo como dnsCitação:
Postado originalmente por 354mp
se vc ainda não configurou as zonas, só memo nos logs, como vc já olhou antes, mas se tivesse problemas não teria iniciado.
Agora dá uma olhada no tutorial para configurar as zonas.
ta okCitação:
Postado originalmente por 354mp
as configurações parecem que estão normais, eu startei o apache mas ele não acessa por www.synapse.com.br, só pelo ip ou pelo localhostCitação:
Postado originalmente por 354mp
ai meu tipow altera ai o teu /etc/resolv.conf pra issu aqui
search www.seudominio.com.br
nameserver ipdoserverdns
e veh ai o que deu!!! :D
coloquei lá, agora ele passou a abrir o apache qdo digito o ip da minha máquina, mas qdo eu digito no browser www.meudominio.com.br não dáCitação:
Postado originalmente por robsonzornitta
no computador na tua lan que vc estiver testandu vc jah colocou o dns primário como sendo o da tua máquina linux server dns?
tente fazer o seguinte c for xp:
coloqu o ip da maquina linux como primario no primeiro campo dns das configurações de rede do xp
se for win98:
a mesma coisa mas coloque tambem como dominio de procura o nome que vc colocou no teu linux no caso naum lembro beim mas eh XXXX.com.br e teste!!!
mande os resultados aqui!!
mas nem no meu servidor tá abrindo, ele mesmo deveria abrirCitação:
Postado originalmente por robsonzornitta
qdo eu ping pra www.meudominio.com.br no servidor dns que está configurado, ele dá host não encontrado
bom talves estaja alguma coisa errada nos teus arquivos de configuração do bind, dah uma olhada nos arquivo que vc mesmo crioh como named.conf e tals, uam boa dica dissu eh vc se basear nos arquivos de template que veim junto cum a documentaçao da distro tente achar os arquivos de ajuda do bind e ponha a maum na maça!!!! vou analizar teus arquivos na primeira pagina e posto pra vc depois aqui!!!
flows eu to olhando lá;Citação:
Postado originalmente por robsonzornitta
qquer ajuda é mto bem vinda
Olha como tá o meu named.conf:
// generated by named-bootconf.pl
options {
directory "/var/named";
/*
* If there is a firewall between you and nameservers you want
* to talk to, you might need to uncomment the query-source
* directive below. Previous versions of BIND always asked
* questions using port 53, but BIND 8.1 uses an unprivileged
* port by default.
*/
// query-source address * port 53;
dump-file "/var/named/dump/named_dump.db";
statistics-file "/var/named/dump/named.stats";
memstatistics-file "/var/named/dump/named.memstats";
// remove this next line if you want named to listen on
// all available interfaces, or adjust add new ones as
// you see fit
listen-on { 192.168.0.254;127.0.0.1/32; };
};
//
// a caching only nameserver config
//
zone "." {
type hint;
file "named.ca";
};
zone "0.0.127.in-addr.arpa" {
type master;
file "named.local";
};
zone "synapse.com.br" {
type master;
file "/var/named/synapse.com.br.hosts";
};
zone "0.168.192.in-addr.arpa" {
type master;
file "/var/named/synapse.com.br.rev";
};
//
// a shared secret for the rndc tool
// this key must be the same one that is in the
// /etc/rndc.conf file
//
//
// a control channel for the new rndc tool
//
controls {
inet 127.0.0.1 allow { localhost; } keys { key_rndc; };
};
Olha só, qdo eu coloco no browser minhamaquina.meudominio.com.br ele abre a página do apache legal, qdo eu coloco www.meudominio.com.br ele dá erro dominio não encontrado.
quando eu coloco www.minhamaquina.meudominio.com.br ele também da erro não foi possivel localizar.
E como está o seu arquivo "/var/named/synapse.com.br.hosts", nele está indicando que o endereço www.meudominio.com.br e o www.minhamaquina.meudominio.com.br estão na sua maquina?
Tá assim:Citação:
Postado originalmente por nod3vic3
$ttl 38400
synapse.com.br. IN SOA lablinux.synapse.com.br. root.lablinux.synapse.com.br. (
1051034896
10800
36000
604800
38400 )
synapse.com.br. IN A 192.168.0.254
synapse.com.br. IN NS lablinux.synapse.com.br.
synapse.com.br. IN MX 5 lablinux.synapse.com.br.
www IN A 192.168.0.254
cara pelo que eu vih acima tu tah apontandu pra lablinux.synapse.com.br
e naum www
soh tah fazendu um redir pra www no ip 192.168.0.254 (que com certeza eh a tua maquina linux!!!!) outra coisa tenta pingar seim o www soh pra teste o synapse.com.br ou lablinux.synapse.com.br tenta ai e me dah uma resposta aqui!!
só ping para lablinux.synapse.com.br sem wwwCitação:
Postado originalmente por robsonzornitta
eu ja editei o arquivo acima e coloquei www antes de todos os endereços para ver se abria e não deu nem pingou
Oque vc acha que pode ser? Acho que é assim mesmo não?
Código :
May 12 10:32:40 lablinux named[11753]: couldn't open pid file '/var/run/named/named.pid': Permission denied
chown named.named /var/run/named/named.pid
chmod 644 /var/run/named/named.pid
service named stop ; service named start
Sds,
isso eu já fiz na página 02 do tópico, só não fiz com .pid, tentei fazer agora edu arquivo não encontradoCitação:
Postado originalmente por karfax
Se não está rodando, não tem pid (deculpe, mas parece óbvio, e eu não notei).
Cheque as permissões de /var/run/named, o bind pode não estar conseguindo gravar nela. Tem que estar 770, named.named
Sds,
não existe a pasta /run em varCitação:
Postado originalmente por karfax
existe /named em /var eu estou confuso
ai em primeiro lugar teim um arquivo teu ai cum probleminha de escrite jah te passo a correção e outra fai o seguinte toh te passandu agora os comandus pra roda issu de uma veze ai vai:
se naum tiver uma pasta chamada /var/run/named vc vai ter que criar
depois de esse comandu: chmod 770 /var/run/named
e coloque esse conteudo no no arquivo named.pid que vai ter que estar na pasta /var/run/named
arquivo named.pid:
//começo do arquivo
2391
//final do arquivo
pronto tah rodandu e outra pra ciriar o arquivo proceda da seguinte forma
cd /var/run/named
vi named.pid
aperte a letra i para inserir no aqruivo e
2391
aperte dai esc e wq e enter tah salvo o arquivo
depois chmod 770 /var/run/named e chmod 770 /var/run/named/named.pid
prontinho
Se não existe, seu sistema está ferrado de verdade. Nesta pasta estão os arquivos contendo os pid's de um monte de serviços do linux. Np arquivo de inicialização do named está indicado exatamente onde devem ser criados os arquivos pid. Se esta pasta não existe, crie-a.
Sds,
Esqueça isto. Toda vez que o named é iniciado ele cria seu proprio .pid com um número diferente - espero - correspondente ao pid que ele está rodando.Citação:
Postado originalmente por robsonzornitta
ps -aux | grep named
Sds,
fiz tudo certinho do jeito que vc falouCitação:
Postado originalmente por robsonzornitta
e relatando tanto o que vc disse qto o amigo acima que postou depois de vc qdo fui verificar a pasta realmente não existia mas qdo eu criei a pasta e setei a permissão como vc falou, apareceu uma porrada de arquivos dentro.
$ttl 38400
synapse.com.br. IN SOA lablinux.synapse.com.br. root.lablinux.synapse.com.br. (
1051034896
10800
36000
604800
38400 )
synapse.com.br. IN A 192.168.0.254
synapse.com.br. IN NS lablinux.synapse.com.br.
synapse.com.br. IN MX 5 lablinux.synapse.com.br.
www A 192.168.0.254
assim eh o arquivo certu do synapse.com.br.zone