ta depois que tu da o No e configura tu grava na flash a auteraçao ???
com o comando write memory
depois de todo processo que vc fizer
digita
wr mem
e reinicie o roteador
Versão Imprimível
ta depois que tu da o No e configura tu grava na flash a auteraçao ???
com o comando write memory
depois de todo processo que vc fizer
digita
wr mem
e reinicie o roteador
..entao NO-->comandos configuração-->write memory ( reboot )
vou testar ..... mas so uma duvida !! por padrao o BOOT deve buscar a imagem de configuração em que local ?
olha depois que tu salvar ele vai ir direto para a flash
Cara fiz do geito que vc falou ... configurei so o ip da Fastethernet pra agilizar dei write memory --->building .... depois desliguei o router e de novo ele aparece a tela
Would you like to enter the initial configuration dialog?( yes/no )
to achando q o boot dele ta indo pra outro lugar ....vo copiar oq ele ta fazendo e colocar ai
ystem Bootstrap, Version 12.2(1r)XE1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support
Copyright (c) 2001 by cisco Systems, Inc.
C1700 platform with 65536 Kbytes of main memory
Allocating additional 5955395 bytes to IO Memory.
PMem allocated: 57713293 bytes; IOMem allocated: 9395571 bytes
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Allocating additional 5955395 bytes to IO Memory.
Allocating additional 5955395 bytes to IO Memory.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 9513
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SY7-M), Version 12.3(15b), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 25-Aug-05 20:28 by ssearch
Image text-base: 0x8000816C, data-base: 0x80E5340C
cisco 1751 (MPC860P) processor (revision 0x600) with 56360K/9176K bytes of memor
y.
Processor board ID JAD06370DZR (3022442426), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: