Re: Ubiquiti M2 ou M5 - Debate!
"granlabor" grato por atender o meu pedido e pela resposta... entao vendo o que vc falou, sai relativamente em conta usar uma rede mixta por assim dizer, 2.4 para clientes relativamente perto e com algumas "barreiras" e 5.8 para longos enlaces e digamos clientes mais importantes? certo?!
pretendo cabear alguns ponto tmb, ja entrei em contato com a Vertical Simples, apesar de sair um pouco caro, creio q seja válido. Eu meio q fiz um jeito usar o switch sem a necessidade de um fio alimentador a mais, vou tirar umas fotos e te mostro. Me desanimou um pouco qndo vc falou da nano... axo ela otima pra distancias pequenas, o melhor seria bullets ou ate mesmo airgrid... Qro Usar o airmax, pra mim os produtos da ubnt sao muito bons, e tendo em vista que uma radio na caixa com poe nos fornecedores sai em media de 95 a 120, dependendo da quantidade, e um bullet2 ta em volta de 119,00 prefiro usar o bullet..
Re: Ubiquiti M2 ou M5 - Debate!
Eu vejo muita gente falando que interferencia nao existe, falando do ruido do ambiente, realmente pouca gente sabe realmente o que e interferencia, acho que o que muita gente fala como interferencia sao pessoas no mesmo canal, considera que estes radios novos trabalham muito bem eliminando este problema, mais e bom lembrar que eles fazem isso usando divisao de tempo, lembrando tambem que o 2,4 so tem 3 canais efetivos,(quem nao entendeu favor procurar no forum) quando vc esta com alguem ocupando o mesmo canal que vc ou parte dele o equipamento nao enxerga isso como ruido, ele simplesmente divide o tempo de forma diferente com isso vc acaba perdendo banda(throughput), estes radinhos baratos acaba ficando com 1 mega de banda, sendo que quando vc nao tem ninguem no mesmo canal vc consegue ate 5 megas de banda.
eu to começando uma rede em 5,8 agora usando ubnt, e vou falar com vcs, sempre achei a falta de informaçoes da ubnt um ponto fraco mais a facilidade de instalacao, agilidade e a possibilidade de instalacao com um unico tecnico, sao varios pontos a favor...
guiangelos realmente uma rede mista e o melhor, e nao e tao dificil de controlar...
Re: Ubiquiti M2 ou M5 - Debate!
Citação:
Postado originalmente por
guiangelus
Me desanimou um pouco qndo vc falou da nano... axo ela otima pra distancias pequenas, o melhor seria bullets ou ate mesmo airgrid... Qro Usar o airmax, pra mim os produtos da ubnt sao muito bons
O que eu falei sobre a NANO é o que eu costumo ouvir de vez em quando... Pode substituir o Nano por Rocket, Bullet ou qualquer outro rádio... Como é notório que eu sou fã da Ubiquti, vez ou outra alguém lança este tipo de frase pra agredir.
A Nano é excelente quando aplicada corretamente. Isto se aplica a qualquer outro equipamento de rádio, independente do fabricante.
Se alguém reclamar de algum equipamento, é porque não se deu ao trabalho de aprender a configurar o equipamento além do default.
Expliquei agora?
Abraço,
ZéAlves
INFORMAÇÃO COMPLEMENTAR SOBRE INTERFERÊNCIA
Fonte = http://www.lbagroup.com/associates/intfaq.php
What is Intermodulation Interference?
There are three basic categories of Intermodulation Interference. They are receiver produced, transmitter produced, and "other" radiated intermodulation interference. Transmitter produced intermodulation interference is the result of one or more transmitters impressing a signal in the non-linear final output stage circuitry of another transmitter, usually via antenna coupling. The intermod product frequency is then re-radiated from the transmitter's antenna. Receiver produced intermodulation inteference is the result of two or more transmitter signals mixing in a receiver RF amplifier or mixer stage when operating in a non-linear range.
"Other" radiated intermodulation interference is the result of transmitter signals mixing in other non-linear junctions. These junctions are usually metallic, such as rusty bolts on a tower, dissimilar metallic junctions, or other non-linear metallic junctions in the area. Intermod products can also be caused by non-linearity in the transmission system such as antenna, transmission line, or connectors.
Top of Page
What is Transmitter Harmonic Interference?
Transmitter harmonic interference is due to non-linear characteristics in a transmitter. The harmonics are always fundamental frequency multiples and the non-linear design of the final output stage of the transmitter. If the harmonic signal falls within the passband of a nearby receiver and the signal level is of sufficient amplitude, it can degrade the performance of the receiver.
Top of Page
What is Transmitter Spurious Output Interference?
Transmitter spurious output interference can be attributed to many different factors in a transmitter. The generation of spurious frequencies could be due to non-linear characteristics in a transmitter or possibly the physical placement of components and unwanted coupling. If a spurious signal falls within the passband of a nearby receiver and the signal level is of sufficient amplitude, it can degrade the performance of the receiver.
Top of Page
What is Receiver Desensitization Interference?
Receiver desensitization interference occurs when an undesired signal from a nearby "off-frequency" transmitter is sufficiently close to a receiver's operating frequency. The signal may get through the RF selectivity of the receiver. If this undesired signal is of sufficient amplitude, the receiver's critical voltage and current levels are altered and the performance of the receiver is degraded at its operating frequency. The gain of the receiver is reduced, thereby reducing the performance of the receiver. A high-power transmitter can be operating several megahertz away from the receiver frequency and/or its antenna can be located several thousand feet from the receiver's antenna and still cause "desense" interference.
Top of Page
What is Transmitter Noise Interference?
Transmitter noise interference occurs because a transmitter radiates energy on its operating frequency as well as frequencies above and below the assigned frequency. The energy that is radiated above and below the assigned frequency is known as sideband noise energy and extends for several megahertz on either side of the operating frequency. This undesired noise energy can fall within the passband of a nearby receiver even if the receiver's operating frequency is several megahertz away. The transmitter noise appears as "on-channel" noise interference and cannot be filtered out at the receiver. It is on the receiver's operating frequency and competes with the desired signal, which in effect, degrades the operational performance.
Re: Ubiquiti M2 ou M5 - Debate!
sobre qual radio escolher na magia da ubnt tem um sheet que demostra as diferenças dos radios
http://www.ubnt.com/downloads/airmax_comparison.pdf
Re: Ubiquiti M2 ou M5 - Debate!
Só de curiosidade para vocês, eu tenho ponto aqui com Noise de -36, rsrsrs, estou migrando este ponto para 5.8 e resolvendo o problema.