Balanceador 4 Links Adsl Só usa 1 Link

EthLinkA - pppoe-out1
EthLinkB - pppoe-out2
EthLinkC - pppoe-out3
EthLinkD - pppoe-out4
modem em bridge
nao consigo fazer ele usar os 4 Links o que pode ta errado nessa configuraçao
MAGLE
add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local in-interface=Local new-connection-mark=conn_ma0 passthrough=yes per-connection-classifier=both-addresses:4/0
add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local in-interface=Local new-connection-mark=conn_mb1 passthrough=yes per-connection-classifier=both-addresses:4/1
add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local in-interface=Local new-connection-mark=conn_mc2 passthrough=yes per-connection-classifier=both-addresses:4/2
add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local in-interface=Local new-connection-mark=conn_mc3 passthrough=yes per-connection-classifier=both-addresses:4/3
add action=mark-connection chain=input comment="" connection-state=new disabled=no in-interface=EthLinkA new-connection-mark=conn_na passthrough=yes
add action=mark-connection chain=input comment="" connection-state=new disabled=no in-interface=EthLinkB new-connection-mark=conn_nb passthrough=yes
add action=mark-connection chain=input comment="" connection-state=new disabled=no in-interface=EthLinkC new-connection-mark=conn_nc passthrough=yes
add action=mark-connection chain=input comment="" connection-state=new disabled=no in-interface=EthLinkD new-connection-mark=conn_nd passthrough=yes
add action=mark-routing chain=output comment="" connection-mark=conn_na disabled=no new-routing-mark=to_ra passthrough=no
add action=mark-routing chain=output comment="" connection-mark=conn_nb disabled=no new-routing-mark=to_rb passthrough=no
add action=mark-routing chain=output comment="" connection-mark=conn_nc disabled=no new-routing-mark=to_rc passthrough=no
add action=mark-routing chain=output comment="" connection-mark=conn_nd disabled=no new-routing-mark=to_rd passthrough=no
add action=mark-routing chain=prerouting comment="" connection-mark=conn_ma0 disabled=no in-interface=Local new-routing-mark=to_nra passthrough=no
add action=mark-routing chain=prerouting comment="" connection-mark=conn_mb1 disabled=no in-interface=Local new-routing-mark=to_nrb passthrough=no
add action=mark-routing chain=prerouting comment="" connection-mark=conn_mc2 disabled=no in-interface=Local new-routing-mark=to_nrc passthrough=no
add action=mark-routing chain=prerouting comment="" connection-mark=conn_mc3 disabled=no in-interface=Local new-routing-mark=to_nrd passthrough=no

ROTA
add comment="" disabled=no distance=2 dst-address=0.0.0.0/0 gateway=EthLinkA scope=30 target-scope=10
add comment="" disabled=no distance=3 dst-address=0.0.0.0/0 gateway=EthLinkB scope=30 target-scope=10
add comment="" disabled=no distance=4 dst-address=0.0.0.0/0 gateway=EthLinkC scope=30 target-scope=10
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=EthLinkD scope=30 target-scope=10

add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=EthLinkA routing-mark=to_nra
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=EthLinkB routing-mark=to_nrb
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=EthLinkC routing-mark=to_nrc
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=EthLinkD routing-mark=to_nrd
NAT
add action=masquerade chain=srcnat comment="MASCARAMENTO PCC" disabled=no out-interface=EthLinkA
add action=masquerade chain=srcnat comment="" disabled=no out-interface=EthLinkB
add action=masquerade chain=srcnat comment="" disabled=no out-interface=EthLinkC
add action=masquerade chain=srcnat comment="" disabled=no out-interface=EthLinkD

Vc tem de usar a interface pppoe e não a ether!!!

Citação:

---

Postado originalmente por juniorcarvalho

Se os modens estão em bridge você usa o pppoe para chegar no GW da operadora então usa-se o pppoe nas regras e não a interface.

EthLinkA - pppoe-out1
EthLinkB - pppoe-out2
EthLinkC - pppoe-out3
EthLinkD - pppoe-out4

modem em bridge
nao consigo fazer ele usar os 4 Links o que pode ta errado nessa configuraçao
Creio que não chegou nem a funcionar, a não ser que os modem estejam sem modo router.
Mas partindo que eles estão em bridge, vamos brincar!

MANGLE
add action=mark-connection chain=input comment="" connection-state=new disabled=no in-interface=pppoe-out1 new-connection-mark=conn_na passthrough=yes
add action=mark-connection chain=input comment="" connection-state=new disabled=no in-interface=pppoe-out2 new-connection-mark=conn_nb passthrough=yes
add action=mark-connection chain=input comment="" connection-state=new disabled=no in-interface=pppoe-out3 new-connection-mark=conn_nc passthrough=yes
add action=mark-connection chain=input comment="" connection-state=new disabled=no in-interface=pppoe-out4 new-connection-mark=conn_nd passthrough=yes

add action=mark-routing chain=output comment="" connection-mark=conn_na disabled=no new-routing-mark=to_ra passthrough=no
add action=mark-routing chain=output comment="" connection-mark=conn_nb disabled=no new-routing-mark=to_rb passthrough=no
add action=mark-routing chain=output comment="" connection-mark=conn_nc disabled=no new-routing-mark=to_rc passthrough=no
add action=mark-routing chain=output comment="" connection-mark=conn_nd disabled=no new-routing-mark=to_rd passthrough=no

Em in-interface coloque a sua interface de saida para os clientes, a suposta EthClientes como foi descrita no post do Mestre M4d3, mas pode ser qualquer outro nome a sua escolha..

add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local in-interface=EthClientes new-connection-mark=conn_ma0 passthrough=yes per-connection-classifier=both-addresses:4/0
add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local in-interface=EthClientes new-connection-mark=conn_mb1 passthrough=yes per-connection-classifier=both-addresses:4/1
add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local in-interface=EthClientes new-connection-mark=conn_mc2 passthrough=yes per-connection-classifier=both-addresses:4/2
add action=mark-connection chain=prerouting comment="" disabled=no dst-address-type=!local in-interface=EthClientes new-connection-mark=conn_mc3 passthrough=yes per-connection-classifier=both-addresses:4/3
add action=mark-routing chain=prerouting comment="" connection-mark=conn_ma0 disabled=no in-interface=EthClientes new-routing-mark=to_nra passthrough=no

add action=mark-routing chain=prerouting comment="" connection-mark=conn_mb1 disabled=no in-interface=EthClientes new-routing-mark=to_nrb passthrough=no
add action=mark-routing chain=prerouting comment="" connection-mark=conn_mc2 disabled=no in-interface=EthClientes new-routing-mark=to_nrc passthrough=no
add action=mark-routing chain=prerouting comment="" connection-mark=conn_mc3 disabled=no in-interface=EthClientes new-routing-mark=to_nrd passthrough=no

ROTA, Aqui em distance você especifica sua rota mais confiavel, creio que seja a do pppoe-out1, então damos distance 1 para ele.

add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 scope=30 target-scope=10
add comment="" disabled=no distance=2 dst-address=0.0.0.0/0 gateway=pppoe-out2 scope=30 target-scope=10
add comment="" disabled=no distance=3 dst-address=0.0.0.0/0 gateway=pppoe-out3 scope=30 target-scope=10
add comment="" disabled=no distance=4 dst-address=0.0.0.0/0 gateway=pppoe-out4 scope=30 target-scope=10

add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=to_nra
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 routing-mark=to_nrb
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out3 routing-mark=to_nrc
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out4 routing-mark=to_nrd

NAT

add action=masquerade chain=srcnat comment="" disabled=no out-interface=pppoe-out1
add action=masquerade chain=srcnat comment="" disabled=no out-interface=pppoe-out2
add action=masquerade chain=srcnat comment="" disabled=no out-interface=pppoe-out3
add action=masquerade chain=srcnat comment="" disabled=no out-interface=pppoe-out4

---

Visualize os itens em contraste e divirta-se, não esquecendo de agradecer.