Rockwell International HCF 56k V90
Garela,
Eu gostaria de saber como fazer para configurar o meu modem corretamente e como faco para conectar a um provedor.
eu tenho um modem Rockwell International HCF 56k V90 FaxModem .
O minha Distribuição é da Conectiva e a versão 8.0 com o Kernel 2.4.18.
Eu consegui obter alguma informações sobre o meu modem, com os seguintes comandos:
lspci
cat /proc/pci
-------------------------
lspci
00:00.0 Host bridge: Intel Corporation: Unknown device 1130 (rev 02)
00:01.0 PCI bridge: Intel Corporation: Unknown device 1131 (rev 02)
00:1e.0 PCI bridge: Intel Corporation: Unknown device 244e (rev 02)
00:1f.0 ISA bridge: Intel Corporation: Unknown device 2440 (rev 02)
00:1f.1 IDE interface: Intel Corporation: Unknown device 244b (rev 02)
00:1f.2 USB Controller: Intel Corporation: Unknown device 2442 (rev 02)
00:1f.3 SMBus: Intel Corporation: Unknown device 2443 (rev 02)
00:1f.4 USB Controller: Intel Corporation: Unknown device 2444 (rev 02)
01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 03)
02:0b.0 Serial controller: Rockwell International HCF 56k V90 FaxModem (rev 01)
02:0c.0 Multimedia audio controller: Avance Logic Inc. ALS4000 Audio Chipset
02:0d.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)
02:0e.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
------------------
cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 2).
Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
Bus 0, device 1, function 0:
PCI bridge: PCI device 8086:1131 (Intel Corp.) (rev 2).
Master Capable. No bursts. Min Gnt=8.
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 2).
Master Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 2).
Bus 0, device 31, function 1:
IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 2).
I/O at 0xb800 [0xb80f].
Bus 0, device 31, function 2:
USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A) (rev 2).
IRQ 9.
I/O at 0xb400 [0xb41f].
Bus 0, device 31, function 3:
SMBus: Intel Corp. 82820 820 (Camino 2) Chipset SMBus (rev 2).
IRQ 10.
I/O at 0xe800 [0xe80f].
Bus 0, device 31, function 4:
USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub B) (rev 2).
IRQ 9.
I/O at 0xb000 [0xb01f].
Bus 1, device 0, function 0:
VGA compatible controller: S3 Inc. Savage 4 (rev 3).
IRQ 11.
Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
Non-prefetchable 32 bit memory at 0xef000000 [0xef07ffff].
Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff].
Bus 2, device 11, function 0
Serial controller: Rockwell International HCF 56k Data/Fax Modem (rev 1).
IRQ 9.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xed810000 [0xed81ffff].
Bus 2, device 12, function 0:
Multimedia audio controller: Avance Logic Inc. ALS4000 Audio Chipset (rev 0).
IRQ 9.
Master Capable. Latency=32.
I/O at 0xd800 [0xd87f].
Bus 2, device 13, function 0:
Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 34).
IRQ 9.
Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0xd400 [0xd47f].
Non-prefetchable 32 bit memory at 0xee000000 [0xee00007f].
Bus 2, device 14, function 0:
Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 4<IMG SRC="images/forum/icons/icon_cool.gif">.
IRQ 5.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0xd000 [0xd07f].
Non-prefetchable 32 bit memory at 0xed800000 [0xed80007f].
--------------
Alguém saberia me ajudar....
Grato Marcfee
Rockwell International HCF 56k V90
Rockwell International HCF 56k V90
Opá e ai legal..
Poxa eu dá um olhada em www.jcmp3.org ou www.linmodems.org procure algo sobre seu modem driver legal..
para configurar um modem vc deve saber qual a port ttyS0 ttyS1 ttyS2 ttyS3 no windows com 1 significa ttyS0 ok e assim por diante depois disso deveria ser mais ou menos assim
root# setserial -a /dev/ttyS0
/dev/ttyS0, Line 0, uart: 16550A, port: 0x03f8, irq 4
baud_base: 115200, close_ delay: 50, divisor: 0
closing_wait: 3000
flags: spd_normal skip test bom depois q tiver essas informações...
agora vc dev configurar a porta do modem
root# cd /dev
root# setserial ttyS0 uart 16550 irq 4 port 0x03f8
para manter a configuração coloque o comando no arquivo etc/rc.d/rc.serial legal
A seguir apague o link chamado /dev/modem e o faça outro apontando para o ttyS0
root# cd /dev
root# rm modem
root# ln -s ttyS0 modem
bom é um exemplo mais ou menos blz... espero q ajude
para obter mais informação sobre a suas placas pode acrescentar -vvv no root# lspci -vvv
bom espero q ajude em algo até mais velho...
