Versão Imprimível
Caros colegas,
Estou precisando de ajuda da comunidade pra configurar dois cartões orinoco wireless no mesmo servidor, um consigo configurar mas outro não faco ideia como proceder pra levantar o outro cartão, alguem poderia dar ulguma sugestão.
Atenciosamente,
Odair Borges
Velho .. é o seguinte .. o procedimento é mesmo que vc fez para levantar o primeiro cartao....
verifique se nao esta havendo nenhum conflito de IRQ... etc
da uma olhanda nos logs..
posta pra nois ai os erros q tao dando...
blza
By
Kernel Panic
Colega,
Vc estava certo o S.O esta levantando os dois cartões agora, so que ele assume o ultimo ip para os dois cartões...segue o network.opts
case "$ADDRESS" in
*,*,*,*)
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT="eth0"
# Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
DHCP="n"
# If you need to explicitly specify a hostname for DHCP requests
DHCP_HOSTNAME=""
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.168.8.150"
NETMASK="255.255.255.0"
NETWORK="192.168.8.0"
BROADCAST="192.168.8.255"
# Gateway address for static routing
GATEWAY=""
# Things to add to /etc/resolv.conf for this interface
DOMAIN=""
SEARCH=""
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# If you need to override the interface's MTU...
MTU=""
# For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
# Extra stuff to do after setting up the interface
start_fn () { return; }
# Extra stuff to do before shutting down the interface
stop_fn () { return; }
# Card eject policy options
NO_CHECK=n
NO_FUSER=n
;;
esac
case "$ADDRESS" in
*,*,*,*)
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT="eth0"
# Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
DHCP="n"
# If you need to explicitly specify a hostname for DHCP requests
DHCP_HOSTNAME=""
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.168.1.150"
NETMASK="255.255.255.0"
NETWORK="192.168.1.0"
BROADCAST="192.168.1.255"
# Gateway address for static routing
GATEWAY=""
# Things to add to /etc/resolv.conf for this interface
DOMAIN=""
SEARCH=""
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# If you need to override the interface's MTU...
MTU=""
# For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
# Extra stuff to do after setting up the interface
start_fn () { return; }
# Extra stuff to do before shutting down the interface
stop_fn () { return; }
# Card eject policy options
NO_CHECK=n
NO_FUSER=n
;;
esac
Colega,
Vc estava certo o S.O esta levantando os dois cartões agora, so que ele assume o ultimo ip para os dois cartões...segue o network.opts
case "$ADDRESS" in
*,*,*,*)
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT="eth0"
# Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
DHCP="n"
# If you need to explicitly specify a hostname for DHCP requests
DHCP_HOSTNAME=""
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.168.8.150"
NETMASK="255.255.255.0"
NETWORK="192.168.8.0"
BROADCAST="192.168.8.255"
# Gateway address for static routing
GATEWAY=""
# Things to add to /etc/resolv.conf for this interface
DOMAIN=""
SEARCH=""
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# If you need to override the interface's MTU...
MTU=""
# For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
# Extra stuff to do after setting up the interface
start_fn () { return; }
# Extra stuff to do before shutting down the interface
stop_fn () { return; }
# Card eject policy options
NO_CHECK=n
NO_FUSER=n
;;
esac
case "$ADDRESS" in
*,*,*,*)
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT="eth0"
# Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)? [y/n]
DHCP="n"
# If you need to explicitly specify a hostname for DHCP requests
DHCP_HOSTNAME=""
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.168.1.150"
NETMASK="255.255.255.0"
NETWORK="192.168.1.0"
BROADCAST="192.168.1.255"
# Gateway address for static routing
GATEWAY=""
# Things to add to /etc/resolv.conf for this interface
DOMAIN=""
SEARCH=""
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# If you need to override the interface's MTU...
MTU=""
# For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
# Extra stuff to do after setting up the interface
start_fn () { return; }
# Extra stuff to do before shutting down the interface
stop_fn () { return; }
# Card eject policy options
NO_CHECK=n
NO_FUSER=n
;;
esac
Tenho diversos rádios, o WAP 11 por R$ 315,00 o SWL 3300 por US$ 230,00 com Pig Tail o AP900+ por US$ 115,00 e ainda outros rádios, conectores , Pig tail , antenas, etc... Tenho antena por R$ 57,00 , tenho o Senao por US$ 220,00 , Ovislink US$ 113,00
, WET11 por US$ 125,00
[email protected] fone: 6351.4365
Citação:
Postado originalmente por Glaucia
po so ajuda no spam?
Especifique os ips para os radiosCitação:
Postado originalmente por Odair
ifconfig eth0 192.168.1.1 netmask 255.255.255.0
ifconfig eth0 192.168.2.1 netmask 255.255.255.0
o mesmo voce tem que fazer nas configuracoes do radio ex:
iwconfig eth0 essid Radio1
iwconfig eth1 essid Radio2
e assim por diante.