Olá galera under, montei meu servidor de cahe mk_proxy, pelo que percebir esta salvando arquivos tudo beleza, porém nao percebo grande rendimento! minha grande duvida e com relaçao essas regras estao certas? uso rb 433 servidor hotspot, sei que a maioria vai indicar servidor aquele ou outro, porem gostaria de testar esse, e queria saber se as regras estao certa, desde entao agradeço a ajuda e opiniao de todos.
/ip firewall mangle
add action=mark-connection chain=postrouting comment="Marca o com e sem TOS" disabled=no dscp=12 \
new-connection-mark=n-cache passthrough=yes protocol=tcp src-port=3128
add action=mark-connection chain=postrouting disabled=no dscp=!12 new-connection-mark=s-cache passthrough
yes protocol=tcp src-port=3128
add action=mark-packet chain=postrouting comment="Libera cache full" connection-mark=n-cache disabled=no
new-packet-mark=Cache-Packet passthrough=no
/ip firewall nat
add action=dst-nat chain=pre-hotspot disabled=no dst-address=!10.0.0.2 dst-port=80 hotspot=auth protocol=\
tcp src-address=192.168.0.0/22 to-addresses=10.0.0.2 to-ports=3128
add action=masquerade chain=srcnat disabled=no out-interface=LINK_DIRETO
/queue tree
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name=CACHE-FULL \
packet-mark=Cache-Packet parent=global-out priority=8 queue=default
add kind=pcq name=cache pcq-burst-rate=0 pcq-burst-threshold=0 pcq-burst-time=10s \
pcq-classifier=dst-address pcq-dst-address-mask=32 pcq-dst-address6-mask=128 pcq-limit=5
pcq-rate=4800k pcq-src-address-mask=32 pcq-src-address6-mask=128 pcq-total-limit=2000