Ajudem a Fazer um Load Balance de 5 links

[isacloko]

eu tenho 5 links

Link1=600kbs
Link2=600kbs
Link3=600Kbs
Link4=600kbs
Link5=2M

Meu Mk tem 4 Interface

-Rede
-Wirelles
-Entrada1
-Entrada2
-Bridge1

Rede e rede cabiada para os clientes
Wirelles e a rede wifi dos clientes
bridge1 e a bridge da interface (Rede + Wirelles)

Entrada1 entra os 4 links de 600kbs
Entrada2 entra o Link full de 2Mbts

Ips:

Link1 - 192.168.3.1
Link2 - 192.168.254.254
Link3 - 192.168.50.1
Link4 - 20.1.1.1
Link5 - 189.12.xxx.xxx

Bridge1 - 192.168.0.1

se alguem poder me ajudar a fazer o Load Balance dessas 5 linhas pelo NTH agradeceria muito, pq n guento mais quebrar a cabeça.

[WRSistemas]

isacloko

Fiz um bem parecido com esse seu o meu e o seguinte

link-FULL - 5 Mbps

link-1 - 2.5 Mbps_ADSL
link-2 - 2.5 Mbps_ADSL
link-3 - 2.5 Mbps_ADSL
link-4 - 1.5 Mbps_ADSL

ai tenho um GW de rede onde faço os controles de banda, mac .... ai nesse GW de rede ele indica as rotas p/ o Border-1 que e onde esta o link FULL para clientes com banda garantida e com IP's validos e no Border-2 estão os 4 adsl's balanceados de forma que o nth faça o sorteio .


______________________________________________________
Quem tem medo de perguntar,tem vergonha de aprender...

MSN - [email protected]

Rafael G.T.

[isacloko]

isacloko

Fiz um bem parecido com esse seu o meu e o seguinte

link-FULL - 5 Mbps

link-1 - 2.5 Mbps_ADSL
link-2 - 2.5 Mbps_ADSL
link-3 - 2.5 Mbps_ADSL
link-4 - 1.5 Mbps_ADSL

ai tenho um GW de rede onde faço os controles de banda, mac .... ai nesse GW de rede ele indica as rotas p/ o Border-1 que e onde esta o link FULL para clientes com banda garantida e com IP's validos e no Border-2 estão os 4 adsl's balanceados de forma que o nth faça o sorteio .


vc

______________________________________________________
Quem tem medo de perguntar,tem vergonha de aprender...

MSN - [email protected]

Rafael G.T.

interessante!!!

tem como vc me passar as suas configurações, pra mim fazer um teste
agradeço muito.

msn> [email protected]

[WRSistemas]

Olha so isacloko prefiro te ajudar pq se eu postar as regras aqui vc vai desistir de fazer o balanceamento !!! pra vc ter uma ideia estou tendo problemas p/ restaurar o bkp dela em outra maquina pq preciso de uma maquina rodando de bkp



___________________________________ ___________________
Quem tem medo de perguntar,tem vergonha de aprender...

MSN - [email protected]

[isacloko]

Olha so isacloko prefiro te ajudar pq se eu postar as regras aqui vc vai desistir de fazer o balanceamento !!! pra vc ter uma ideia estou tendo problemas p/ restaurar o bkp dela em outra maquina pq preciso de uma maquina rodando de bkp



___________________________________ ___________________
Quem tem medo de perguntar,tem vergonha de aprender...

MSN - [email protected]

verifica pra mim seu eu fiz certo aqui o load balance

sendo que o:

link1 = 600kbs - dsl
link2 = 600kbs - dsl
link3 = 600kbs - dsl
link4 = 1Mb - dsl
link5 = 2Mb Full Embratel


/ip firewall mangle
add action=mark-connection chain=prerouting comment=Link1 connection-state=\
new disabled=no dst-address-list=!ips in-interface=bridge1 \
new-connection-mark=link1 nth=4,0 passthrough=yes
add action=mark-routing chain=prerouting comment="" connection-mark=link1 \
disabled=no in-interface=bridge1 new-routing-mark=link1 passthrough=no
add action=mark-connection chain=prerouting comment=Link2 connection-state=\
new disabled=no dst-address-list=!ips in-interface=bridge1 \
new-connection-mark=link2 nth=4,1 passthrough=yes
add action=mark-routing chain=prerouting comment="" connection-mark=link2 \
disabled=no in-interface=bridge1 new-routing-mark=link2 passthrough=yes
add action=mark-connection chain=prerouting comment=Link3 connection-state=\
new disabled=no dst-address-list=!ips in-interface=bridge1 \
new-connection-mark=link3 nth=4,2 passthrough=yes
add action=mark-routing chain=prerouting comment="" connection-mark=link3 \
disabled=no in-interface=bridge1 new-routing-mark=link3 passthrough=no
add action=mark-connection chain=prerouting comment=Link4 connection-state=\
new disabled=no dst-address-list=!ips in-interface=bridge1 \
new-connection-mark=link4 nth=4,3 passthrough=yes
add action=mark-routing chain=prerouting comment="" connection-mark=link4 \
disabled=no in-interface=bridge1 new-routing-mark=link4 passthrough=no
add action=mark-connection chain=prerouting comment=Link5 connection-state=\
new disabled=no dst-address-list=!ips in-interface=bridge1 \
new-connection-mark=link5 nth=4,4 passthrough=yes
add action=mark-routing chain=prerouting comment="" connection-mark=link5 \
disabled=no in-interface=bridge1 new-routing-mark=link5 passthrough=no
add action=mark-routing chain=prerouting comment=msn disabled=no dst-port=\
1863 new-routing-mark=link2 passthrough=yes protocol=tcp
add action=mark-packet chain=prerouting comment="" disabled=no \
new-packet-mark=link2 passthrough=yes routing-mark=link2
add action=add-src-to-address-list address-list=ips address-list-timeout=0s \
chain=prerouting comment="" disabled=no in-interface=bridge1

/ip firewall nat
add action=masquerade chain=srcnat comment=Masquarede disabled=no \
src-address=192.168.0.0/24
add action=src-nat chain=srcnat comment="" connection-mark=link1 disabled=no \
to-addresses=192.168.3.1 to-ports=0-65535
add action=src-nat chain=srcnat comment="" connection-mark=link2 disabled=no \
to-addresses=192.168.254.254 to-ports=0-65535
add action=src-nat chain=srcnat comment="" connection-mark=link3 disabled=no \
to-addresses=20.1.1.1 to-ports=0-65535
add action=src-nat chain=srcnat comment="" connection-mark=link4 disabled=no \
to-addresses=187.12.xxx.xxx to-ports=0-65535
add action=src-nat chain=srcnat comment="" connection-mark=link5 disabled=no \
to-addresses=192.168.50.1 to-ports=0-65535

/ip route
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
192.168.3.1 routing-mark=link1 scope=30 target-scope=10
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
192.168.254.254 routing-mark=link2 scope=30 target-scope=10
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=20.1.1.1 \
routing-mark=link3 scope=30 target-scope=10
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
187.12.xxx.xxx routing-mark=link4 scope=30 target-scope=10
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
192.168.50.1 routing-mark=link5 scope=30 target-scope=10

verefica se eu fiz certo os nth, pq n sou muito bom nisso ainda n

desde ja muito obrigado

[olivionet]

Tem um load todo explicado aki nesse link:

https://under-linux.org/forums/11979...e-load-balance

flw !!