+ Responder ao Tópico



  1. #1

    Question Problemas com Controladora Sata - Cdrom e HD

    Caros Amigos...

    Há algum tempo enfrento problemas com o Debian e seus derivados, mais especificamente o Ubuntu-server,
    Do nada é enviado para tela(terminal - console) a seguinte mensagem:

    - Este me parece referente a gravadora
    [125.204343] end_request: I/O error, dev sr0, setor 1431248
    [125.204394] Buffer I/O error on device sr0, logical block 357812

    - Este referente ao HD-SATA
    end_request: I/O error, dev sdb, sector 0
    end_request: I/O error, dev sdd, sector 0
    end_request: I/O error, dev sdc, sector 0


    Pelo que pude notar após várias pesquisas é que são mensagens enviadas pelo kernel para o terminal quando o mesmo não consegue se comunicar de forma correta, no caso com a Gravadora Sata e o HD sata.
    Já fiz várias pesquisas sobre o assunto, ainda não consegui resolver o que me fez testar outras distros.
    Testei o OpenSuse e o CentOS. Ambas não apresentaram o erro. Simulei as mesmas situações onde o Debian e Ubuntu apresentaram os erros acima.. até a mesma máquina foi usada...
    Então hoje uso OpenSuse...
    Testei o Debian Squeeze para saber se o problema já tinha sido corrigido mas ainda continua..
    Sou muito fã do Debian e queria tentar resolver isso para voltar a usar.
    Soluções já tentadas e sem sucesso:
    1 - na inicialização: all_generic_ide
    2 - na inicialização: all_generic_ide=1

    * Lembrando que o erro não acontece quando é gravadora IDE ou HD IDE
    * Lembrando também que as máquinas que testei são novas....

    Para quem achar interessante segue a saída do comando lspci... de uma máquina que testei com o Debian e acabei voltando a intalar o OpenSuse:

    00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
    00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
    00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
    00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
    00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
    01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)


    Para quem quiser mais detalhes de um dos HDs segue a saida do comando smartctl --all /dev/sda

    smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
    Home page is http://smartmontools.sourceforge.net/

    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Caviar Second Generation Serial ATA family
    Device Model: WDC WD1600AABS-00PRA0
    Serial Number: WD-WMAP9E330413
    Firmware Version: 05.06H05
    User Capacity: 160,041,885,696 bytes
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 7
    ATA Standard is: Exact ATA specification draft version not indicated
    Local Time is: Wed Nov 18 11:50:44 2009 UCT
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x84) Offline data collection activity
    was suspended by an interrupting command from host.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: (4380) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 58) minutes.
    Conveyance self-test routine
    recommended polling time: ( 6) minutes.
    SCT capabilities: (0x103f) SCT Status supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0003 159 158 021 Pre-fail Always - 3025
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 230
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
    9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2323
    10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
    11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 226
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 37
    193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 235
    194 Temperature_Celsius 0x0022 101 093 000 Old_age Always - 42
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Completed without error 00% 2323 -
    # 2 Short offline Completed without error 00% 2323 -

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    Me parece que está tudo ok!
    Desde já agradeço a todos que puderem me ajudar..

    Um abraço,
    Fábio.
    Última edição por fabiocs; 18-11-2009 às 13:20.

  2. #2

    Padrão

    Ola meu caro! Também sou fã de Debian, compartilho seus sentimentos =P
    Comigo aconteceu amesma coisa na minha máquina Desktop, no meu caso o HD que esta meio... "capenga".
    Ja testou com outros HDs?
    Ja tentou examinar o mesmo? (fsck)

  3. #3

    Padrão

    Sim.... já fiz os procedimentos
    Testei em máquinas novas e em mais de três, se não me engano...
    Todas hoje estão em produção com o OpenSuse sem apresentar problemas algum...

    Falows
    Fabiocs

  4. #4

    Padrão

    Alguém saberia me dizer se é alguma incompatibilidade com o chipset?
    É possível escolher qual driver que vai ser carregado, no caso o driver que controla os dispositivos satas?