Redundancia só funciona se Desabilitar a Interface que está Down

[jpmarlen]

Olá pessoal estou com um pequeno problema aqui na empresa onde trabalho, tem um mk 450G com 2 link´s da VELOX e 1 Link Dedicado, Só que quando um um dos links cai o outro só assume depois que eu desconecto o cabo de rede ou quando eu desativo a interface dele.
Fazendo um pesquisa por alto vi que é possivel ir em: tools\ netwatch criar um host para cada link e fazer um script para quando um cair o outro assumir.
Alguém poderia me ajudar com esse problema? ou postar uma solução?


Segue como está minha configuração:


LAN 192.168.0.1
DEDICADO= ISP1 192.168.2.1
VELOX= ISP2 192.168.1.1
VELOX2= ISP3 192.168.3.1




/ip firewall mangle
add action=accept chain=prerouting comment="" disabled=no dst-address=\
192.168.1.0/24 in-interface=LAN
add action=accept chain=prerouting comment="" disabled=no dst-address=\
192.168.2.0/24 in-interface=LAN
add action=accept chain=prerouting comment="aceita conex\E3o velox2" \
disabled=no dst-address=192.168.3.0/24 in-interface=LAN
add action=mark-connection chain=prerouting comment="" connection-mark=\
no-mark disabled=no in-interface=ISP1 new-connection-mark=ISP1_conn \
passthrough=yes
add action=mark-connection chain=prerouting comment="" connection-mark=\
no-mark disabled=no in-interface=ISP2 new-connection-mark=ISP2_conn \
passthrough=yes
add action=mark-connection chain=prerouting comment="Marca para Velox2" \
connection-mark=no-mark disabled=no in-interface=ISP3 \
new-connection-mark=ISP3_conn passthrough=yes
add action=mark-connection chain=prerouting comment="" connection-mark=\
no-mark disabled=no dst-address-type=!local in-interface=LAN \
new-connection-mark=ISP1_conn passthrough=yes per-connection-classifier=\
both-addresses:3/0
add action=mark-connection chain=prerouting comment="" connection-mark=\
no-mark disabled=no dst-address-type=!local in-interface=LAN \
new-connection-mark=ISP2_conn passthrough=yes per-connection-classifier=\
both-addresses:3/1
add action=mark-connection chain=prerouting comment="Classifica para Velox2" \
connection-mark=no-mark disabled=no dst-address-type=!local in-interface=\
LAN new-connection-mark=ISP3_conn passthrough=yes \
per-connection-classifier=both-addresses:3/2
add action=mark-routing chain=prerouting comment="" connection-mark=ISP1_conn \
disabled=no in-interface=LAN new-routing-mark=to_ISP1 passthrough=yes
add action=mark-routing chain=prerouting comment="" connection-mark=ISP2_conn \
disabled=no in-interface=LAN new-routing-mark=to_ISP2 passthrough=yes
add action=mark-routing chain=prerouting comment="Marca pra sair pela Velox2" \
connection-mark=ISP3_conn disabled=no in-interface=LAN new-routing-mark=\
to_ISP3 passthrough=yes
add action=mark-routing chain=output comment="" connection-mark=ISP1_conn \
disabled=no new-routing-mark=to_ISP1 passthrough=yes
add action=mark-routing chain=output comment="" connection-mark=ISP2_conn \
disabled=no new-routing-mark=to_ISP2 passthrough=yes
add action=mark-routing chain=output comment="Saida pelo Velox2" \
connection-mark=ISP3_conn disabled=no new-routing-mark=to_ISP3 \
passthrough=yes