Saiu a nova versão airos 5.5

[kaluham]

Olá amigos,
saiu a nova versão airos 5.5, não baixei ainda, mas vi que tem algumas novidades, como poder usar canalização de 3 e 8 mhz na linha m900.
Também na linha m2/m5 a possibilidade de canalização de 8 e 30 mhz,
vamos atualizar e ver as novas funcionalidades!

[sidicol]

opa ja to testando....

[naldo864]

hummmmm
interressante e por causa do airfiber ,compatibilidade .

[alexsuarezferreira]

As Novidades.




AirOS V Firmware Revision History====================================================================Supported products * Bullet M, Titanium * Rocket M * NanoStation M * AirGrid M / AirGrid HP M * NanoBridge M * PowerBridge M * PicoStation M * NanoStation Loco M * AirRouter * PowerAP N * Rocket M365 * Rocket M900 * NanoStation M365 * NanoStation Loco M900 * NanoBridge M365 * NanoBridge M900 * NanoBridge M3 * PowerBridge M10====================================================================Version 5.5 - Final Release (April 10, 2012)--------------------------------------------New product support:- New: Bullet M2 Titanium- New: Bullet M5 TitaniumNew functionality:- New: Management VLAN support- New: Advanced network settings configuration mode- New: RADIUS MAC authentication- New: Low TX power mode support for all M series models- New: AirMax client support for 802.11 a/b/g products- New: DHCP relay functionality in Router/SOHO Router mode- New: UPnP server support in Router/SOHO Router modes- New: Ability to Block WAN Access in SOHO Router mode- New: Fallback IP for PPPoE client- New: 3/8 MHz channel width support for M900- New: 8/30 MHz channel width support for M2/M5- New: 8/25 MHz channel width support for M3- New: 25 MHz channel width support for M365- New: Full range of channel width options in Compliance mode- New: Max allowed MTU size for newer HW revision models is 2024 bytes- New: Make Device name the Product Model by default- New: Separate throughput graphs for LAN0/LAN1 interfaces- New: Option to create support info file with ping watchdog before device reboot- New: Enable/Disable CDP option in Device Discovery section- New: Check for existing uploaded firmware image when opening System page- New: Prepare for IPv6 support- New: Traffic shaper for ingress traffic- New: Notification for software updates- New: Add PPPoE service name configuration- New: Kernel patches for SIP conntrack/NAT support- New: Show AirMax priority in Main page for Station modeFixes:- Fix: Configuration change causes device with a long uptime to lock up- Fix: Device stops passing traffic after some time and requires a reboot or "kick" to work again- Fix: Dynamic DNS update after PPPoE session initialization- Fix: Station list is empty when there are few stations associated- Fix: Port ID is mandatory in CDP packet- Fix: STA-WDS in bridge mode is passing back multicast/broadcast packets- Fix: "Antenna Gain" and "Cable Loss" fields are locked for LocoM900 with external antenna- Fix: Incorrect connection time reporting- Fix: Timestamps reset because of stuck beacon. Causes other manufacturers' (i.e. Tranzeo) devices to re-associate.- Fix: Can't launch airView with HTTPS enabled on IE8- Fix: Traceroute fails to DNS host with multiple addressesImprovements/Change requests:- Improvement: Linux kernel update to 2.6.32 version- Improvement: AirMax performance in large PtMP networks- Improvement: AirSync performance in PtMP networks- Improvement: ACL List: Dynamic list now allows instant changes (no restart or dropped connections required)- Improvement: ACL List: MAC list limit increased from 64 to unlimited- Improvement: ACL List: Ability to add comments to MACs- Improvement: ACL List: Ability to enable/disable a MAC without removing it from the list- Improvement: DFS functionality improvement according FCC/ETSI requirements- Improvement: Report Horizontal / Vertical antenna instead of "Chain 0 / Chain 1"- Improvement: New look for wireless mode configuration- Improvement: Various WEB GUI tweaks, changes, improvements- Improvement: Send NASID in Access-Request packet.- Improvement: Add internal speed test tool to DMZ exemption ports- Improvement: Hide Discovery Tool for read-only account - Improvement: Extension for Port Forward configuration. Allow to specify Public IPRegional Updates:- New: Initial Login page with Country/Language selection- New: Replace Obey Regulatory rules with Auto Adjust to EIRP Limit functionality- New: Remove possibility to change country for some countries (USA, Spain)- New: Remove indoor range for Brazil (5.1-5.3GHz frequencies)- New: Show Band C for UK Frequencies- New: Add Iraq country code- New: Add Nigeria country code- New: EIRP limits for US Regdomain on 2.4GHz and 5.8GHz band- New: Add German translation- Fix: Regulatory rules update for Australia- Fix: Devices with selected country Ukraine doesn't work in 5GHz bandAdditional Notes:- Note: SNMP interface indexes have changed with v5.5 due to advanced network configuration options- Note: AirControl v1 Configuration changes are not supported with v5.5 firmware- Note: Possible Web UI issues with out of date browsers (i.e. Firefox 3.6). It's recommended to use current browser software

[biohazzard]

Alguem possui um tutorial, de ajuste fino do airos 5.5?
Qual o melhor seria o canal adaquado, e potencia que a galera usa.

Aqui esta assim eu estou comentendo algum erro?


5765
20 Mhz
15 Dbm

[Levi848]

Não consegui usar canal diferente do 5.7xx.. dou um site survey só acha rede que está no canal 5.7xx., voltando para versão 5.3.5 acha todas...

[Levi848]

Já atualizei. Mas só funciona no canal 5.7...