Compartilhar Arquivos Rede Interna 8 PCs apos implantação de Balance PCC

[diogosantos]

[ RESOLVIDO ] EU mesmo funçando consegui resolver

Ola

Amigos faz algum tempo que ando afastado do mundo das redes. Graças a Deus tava td fluindo na minha rede até eu me enraivar da internet que tenho (Oi) e colocar mais uma internet via Radio para backup e upload maior, e para isso funcionar fiz um balance PCC na rede, vi um tutorial no YT e coloquei ele pra funcionar.. e esta indo bem, to gostando do resuldado.

O problema que tenho é relacionado ao acesso nos computadores da loja, uso compartilhamento interno aqui na loja, entre assistencia, balcão, servidor, notebook escritorio, computadores de acesso na lan house, e celulares. Tudo funcionava, qlqr pc na rede era so digitar o ip no Explorar de Arquivos e estava la o outro computador sendo acessado os arquivos.. agora não acessa nenhum computador na rede.
Me ajudem a resolver essa questão, não manjo das configurações de MK.


Equipamento usado RouterBOARD 941-2nD Hap Lite
Explicando um pouco sobre meu esquema de ligação

Adiquiri um link de 6mb via radio que coloquei na porta 1 da RB e um da Oi que ja possuiu antes, de 10mb na porta 2 ,
Ativei o wifi da rb e tive que fazer uma bridge nas portas de saida (porta 3 e 4 e wfi) então oq conectar por la sai tudo na mesma faixa de IP 192.168.3.2-254
Ether1 Radio - 192.168.2.1
Ether 2 Oi - 192.168.1.1
Saida na Ether 3 4 Wifi (Bridge) - 192.168.3.1
(Ta escrito Antenas ou Cliente ou algo a mais ai pq peguei do video e não mudei tudo as coisas, pois ja refiz os processos p ver onde errei e ate agora nada de consertar esse problema de acesso a rede interna.)

abaixo vou colocar meu script backup que esta funcionando, se alguem puder me ajudar a arrumar..


Grato desde ja.

[diogosantos]

Balance PCC completo da minha rede, caso alguem precise é só usar

/interface bridgeadd name=Bridge_Lan_WiFi
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce \
    disabled=no frequency=auto mode=ap-bridge name=Wi_Fi_SimTech radio-name=\
    SIMTECH ssid="SimTech Info_Clientes" wds-default-bridge=Bridge_Lan_WiFi \
    wds-mode=dynamic wps-mode=disabled
/interface ethernet
set [ find default-name=ether1 ] name=Link-1_Radio
set [ find default-name=ether2 ] name=Link-2_Oi
set [ find default-name=ether3 ] name=Porta-3_Lan
set [ find default-name=ether4 ] name=Porta-4_Antenas
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods="" \
    group-ciphers=tkip,aes-ccm group-key-update=1h management-protection=\
    allowed mode=dynamic-keys supplicant-identity=MikroTik unicast-ciphers=\
    tkip,aes-ccm wpa-pre-shared-key=testewifi123 wpa2-pre-shared-key=\
    testewifi123
/ip pool
add name=DHCP ranges=192.168.3.2-192.168.3.254
/ip dhcp-server
add address-pool=DHCP disabled=no interface=Bridge_Lan_WiFi lease-time=10h \
    name="Servidor DHCP 1"
/queue simple
add max-limit=256k/2M name=192.168.3.3 target=192.168.3.3/32
/interface bridge port
add bridge=Bridge_Lan_WiFi interface=Porta-3_Lan
add bridge=Bridge_Lan_WiFi interface=Wi_Fi_SimTech
add bridge=Bridge_Lan_WiFi interface=Porta-4_Antenas
/ip address
add address=192.168.3.1/24 comment="Endereco da Rede Lan Porta 3" \
    interface=Porta-3_Lan network=192.168.3.0
add address=192.168.3.1/24 comment="Bridge Endereco da Rede e Wi-Fi" \
    interface=Bridge_Lan_WiFi network=192.168.3.0
/ip arp
add address=192.168.3.230 comment=Roteador_Nano_SimTech interface=\
    Bridge_Lan_WiFi mac-address=00:27:22:96:41:22
add address=192.168.3.50 comment=SimTech_Servidor interface=Bridge_Lan_WiFi \
    mac-address=90:2B:34:FB:54:B6
/ip dhcp-client
add default-route-distance=0 dhcp-options=hostname,clientid disabled=no \
    interface=Link-1_Radio
add default-route-distance=0 dhcp-options=hostname,clientid disabled=no \
    interface=Link-2_Oi
/ip dhcp-server lease
add address=192.168.3.202 client-id=1:64:eb:8c:a4:1e:75 comment=Epson_L455 \
    mac-address=64:EB:8C:A4:1E:75 server="Servidor DHCP 1"
/ip dhcp-server network
add address=192.168.3.0/24 dns-server=192.168.3.1 gateway=192.168.3.1 \
    netmask=24
/ip dns
set allow-remote-requests=yes cache-max-ttl=5d cache-size=4096KiB
/ip firewall filter
add action=drop chain=output comment="NAO ACEITA CONEXAO INVALIDA" \
    connection-state=invalid
/ip firewall mangle
add chain=prerouting comment="==== NO BALANCE ====" dst-address-list=\
    sembalance dst-port=443 in-interface=Bridge_Lan_WiFi protocol=tcp
add chain=prerouting comment="==== ACEITAR TRAFEGO REDE INTERNA =====" \
    dst-address=192.168.3.0/24 src-address=192.168.3.0/24
add action=mark-connection chain=prerouting comment=\
    "==== MARCAR CONEXOES LINK 1 E 2 ====" connection-mark=no-mark \
    in-interface=Link-1_Radio new-connection-mark=CONN_LINK1 protocol=tcp
add action=mark-connection chain=prerouting connection-mark=no-mark \
    in-interface=Link-2_Oi new-connection-mark=CONN_LINK2 protocol=tcp
add action=mark-connection chain=prerouting comment=\
    "==== MARCAR DIVISAO LINK 6MB RADIO ====" connection-mark=no-mark \
    dst-address-type=!local in-interface=Bridge_Lan_WiFi new-connection-mark=\
    CONN_LINK1 per-connection-classifier=both-addresses:4/0
add action=mark-connection chain=prerouting connection-mark=no-mark \
    dst-address-type=!local in-interface=Bridge_Lan_WiFi new-connection-mark=\
    CONN_LINK1 per-connection-classifier=both-addresses:4/1
add action=mark-connection chain=prerouting comment=\
    "==== MARCAR DIVISAO LINK 10MB OI ====" connection-mark=no-mark \
    dst-address-type=!local in-interface=Bridge_Lan_WiFi new-connection-mark=\
    CONN_LINK2 per-connection-classifier=both-addresses:4/2
add action=mark-connection chain=prerouting connection-mark=no-mark \
    dst-address-type=!local in-interface=Bridge_Lan_WiFi new-connection-mark=\
    CONN_LINK2 per-connection-classifier=both-addresses:4/3
add action=mark-routing chain=prerouting comment=\
    "==== MARCAR ROTA PARA OS LINKS ====" connection-mark=CONN_LINK1 \
    in-interface=Bridge_Lan_WiFi new-routing-mark=ROTA_LINK1
add action=mark-routing chain=prerouting connection-mark=CONN_LINK2 \
    in-interface=Bridge_Lan_WiFi new-routing-mark=ROTA_LINK2
add action=mark-routing chain=output comment=\
    "==== MARCANDO ROTA DE SAIDA DOS LINKS ====" connection-mark=CONN_LINK1 \
    new-routing-mark=ROTA_LINK1
add action=mark-routing chain=output connection-mark=CONN_LINK2 \
    new-routing-mark=ROTA_LINK2
/ip firewall nat
add action=masquerade chain=srcnat comment=Link-1_Radio out-interface=\
    Link-1_Radio
add action=masquerade chain=srcnat comment=Link-2_Oi out-interface=Link-2_Oi
/ip route
add check-gateway=ping distance=1 gateway=192.168.1.1 routing-mark=ROTA_LINK1
add check-gateway=ping distance=1 gateway=192.168.2.1 routing-mark=ROTA_LINK2
add distance=1 gateway=192.168.2.1
add distance=1 gateway=192.168.1.1
/ip service
set www-ssl disabled=no
/system clock
set time-zone-name=America/Sao_Paulo
/system identity
set name=SimTech_Info_Cel
/system ntp client
set enabled=yes primary-ntp=200.160.0.8 secondary-ntp=200.160.7.186
/system routerboard settings
set cpu-frequency=650MHz protected-routerboot=disabled
/system scheduler
add interval=1d name=RebootAuto on-event=RebootAuto policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive start-date=\
    sep/13/2017 start-time=05:00:00
add interval=3h name=LimparCache on-event=LimparCache policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive start-time=\
    startup
/system script
add name=RebootAuto owner=admin policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive source=\
    "/ system reboot"
add name=LimparCache owner=admin policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive source=\
    "/ ip dns cache flush"

[diogosantos]

Ola.

Quebrei cabeça hoje aqui e consegui fazer funcionar..

Fui testando ate descobrir. Fiz um masquerede sem setar out-interface e funcionou minha rede interna totalmente.

/ip firewall nat
add action=masquerade chain=srcnat comment=Link-1_Radio out-interface=Link-1_Radio
add action=masquerade chain=srcnat comment=Rede_Interna
add action=masquerade chain=srcnat comment=Link-2_Oi out-interface=Link-2_Oi


Grato desde ja.

E fica a dica pra quem precisar resolver esse problema.

/ip firewall nat
add action=masquerade chain=srcnat comment=Link-1_Radio out-interface=Link-1_Radio
add action=masquerade chain=srcnat comment=Rede_Interna
add action=masquerade chain=srcnat comment=Link-2_Oi out-interface=Link-2_Oi