Página 1 de 2 12 ÚltimoÚltimo
+ Responder ao Tópico



  1. #1
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Ola,
    Estou tendo alguns problemas ao atualizar meu kernel para a 2.6.5

    1) Primeiro, como disse no email anterior meu touchpad esta funcionando parcialmente (o clique no touchpad nao funciona)

    2) Ao dar o boot, a tela fica toda preta e nao aparece as mensagens de inicializacao e o kernel esta configurado com suporte
    a frame buffer. Como arrumar isso?

    3) Depois de recompilar o novo kernel ao instalar os modulos varias mensagens de "Unresolved symbol in module" apareceram,
    principalmente nos modulos referentes ao som e ao iptables. Qual o problema?

    Obrigado,
    L.F.Estivalet

  2. #2

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Sobre a questão 3)
    Provavelmente, você compilou estes módulos junto ao kernel, e por isso, eles não estão disponíveis para serem carregados como módulos... Por isso, vc está com este problema...
    Para resolver isto, vc tem que mudar o arquivo
    /etc/modules.conf
    e retirar estes módulos deste arquivo...

    Sobre o touch pad, vc conseguiu achar os drivers destes touch pads no kernel? marcou eles para serem compilados, ou para serem carregados com módulos?

  3. #3
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Antes de compilar o kernel 2.6.5 carreguei as configuracoes do meu kernel antigo 2.4.20. Na verdade o touchpad eh visto como um mouse PS/2. Pelo que andei pesquisando a nova versao do kernel fez algumas alteracoes em /dev/psaux e acho que isso deve ser o problema...Mas e como resolver...o problema acho que ja achei agora so falta a solucao Alguma ideia?

  4. #4

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    O grande problema nisso tudo é que algumas (muitas) coisas mudaram do 2.4 para o 2.6...
    Por isso cara não sei se carregar a configuração antiga... é uma boa idéia...
    Se eu fosse você tentaria fazer tudo na mão novamente...


    Abraços
    Dirceu

  5. #5
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    o problema eh q sao tantas opcoes...nunca sei o que setar o que nao setar, o que setar como built-in, o que setar como modulo... as perco mais de meia hora so configurando o tal do kernel... depois fica mais meia hora compilando e compilando... e depois do reboot vem a surpresa...nao funciona...a maioria das vezes acontece isso comigo...acho q deveria exitir um programa tipo autodetect para facilitar as coisas um pouco... tem coisas que eu nem sei o que significa...e ficar na tentativa e erro eh muito demorado sem falar que eh muito chato...

  6. #6

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    executa ai um
    cat /proc/pci
    tudo o que aparecer ai tem no seu micro... Digo placas de som vídeo, etc...
    Isso dai, vc tem que setar como built in...
    Na compilação do kernel não sete nada como módulo... A não ser que vc tenha um hardaware, que não utilize sempre e deseje carregar como módulo....
    No mais, sete as opções referentes ao seu processador (intel ou amd) e é só...
    Também gastei meia hora, na primeira vez, li todos os helps que apareciam e diziam o que tal função fazia...., agora já vou "mais no tapa" do que na razão...
    Algumas vezes funciona, outras não, mas a vida é assim mesmo...
    Só mais uma coisa, senão me engano vc também tem que setar as funçòes de partição,por exemplo, se quer que o linux leia fat, tem que setar fat lá na configuração...

    Qualquer coisa, posta ai um cat /proc/pci
    e também o seu .config do diretório onde vc está tentando compilar o seu kernel, agente te ajuda

  7. #7
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Nao tenho acesso ao meu micro de casa, mas assim que chegar vou colocar aqui para vcs me darem uma ajuda... ja recompilei umas 5x o kernel 2.6.5 e nao consigo passar nem do boot... ou aparece um L e fica pendurado ou da uma msg de EBDA too big... sei la... to quase desistindo...

    Posso adiantar que o meu micro eh um Celeron 1.2 256Mb, com tudo integrado... placa mae ECS video Sis630, placa som Sis 7018 ide Sis5513, rede Realtek tudo onboard...

  8. #8
    Administrador Avatar de Fernando
    Ingresso
    Jul 2001
    Localização
    Campinas Area
    Posts
    4.996
    Posts de Blog
    4

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Voce pode começar copiando a config do kernel antigo para nao se deparar com erros deste tipo:

    cp /usr/src/linux-2.4.20/.config /usr/src/linux-2.6.5/

    Ai sim rode o make config/menuconfig/xconfig e somente adicione coisas nas novas opcoes de configuracao do kernel

  9. #9
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    a ultima vez foi exatamento isso que eu fiz. Deu problema igaul...nem chegou a dar boot. Deu a seguinte msg:EBDA too big. Alguma ideia?

  10. #10

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Psy, isso não gera problemas por ele vir do kernel 2.4 para o kernel 2.6?

  11. #11
    Administrador Avatar de Fernando
    Ingresso
    Jul 2001
    Localização
    Campinas Area
    Posts
    4.996
    Posts de Blog
    4

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Citação Postado originalmente por vonlinkerstain
    Psy, isso não gera problemas por ele vir do kernel 2.4 para o kernel 2.6?
    Tem se ele nao configurar as novas opcoes do kernel 2.6.x, mas se configurar teoricamente funcionaria perfeitamente.

    Citação Postado originalmente por luisoft
    a ultima vez foi exatamento isso que eu fiz. Deu problema igaul...nem chegou a dar boot. Deu a seguinte msg:EBDA too big. Alguma ideia?
    Qual distro. voce esta usando?

  12. #12
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    slackware 9 (kernel 2.4.20)

  13. #13

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Agora vc conquistou o psy de vez
    ehehheheeh

  14. #14
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    gosto muita do slackware, uso ele desde as primeiras versoes... estou meio por fora das mudancas que ocorreram do 2.4 para o 2.6 mas nao pensei que fosse encontrar tanta dificuldade, ja que quando fiz a atualizacao do 2.2 para o 2.4 foi bem mais tranquila. O problema eh que nem consigo bootar...com esse problema de EBDA (Extended BIOS Data Area). Pesquisei rapidamente, me parece um problema do lilo nem seria a questao do kernel eu acho... preciso de alguma luz para solucionar esse problema

  15. #15
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Segue o cat do meu /proc/pci:


    PCI devices found:
    Bus 0, device 0, function 0:
    Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 49).
    Master Capable. Latency=64.
    Non-prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
    Bus 0, device 0, function 1:
    IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).
    Master Capable. Latency=16.
    I/O at 0xff00 [0xff0f].
    Bus 0, device 1, function 0:
    ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0).
    Bus 0, device 1, function 2:
    USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7).
    IRQ 5.
    Master Capable. Latency=32. Max Lat=80.
    Non-prefetchable 32 bit memory at 0xdffd0000 [0xdffd0fff].
    Bus 0, device 1, function 3:
    USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7).
    IRQ 5.
    Master Capable. Latency=32. Max Lat=80.
    Non-prefetchable 32 bit memory at 0xdffe0000 [0xdffe0fff].
    Bus 0, device 1, function 4:
    Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 2).
    IRQ 11.
    Master Capable. Latency=32. Min Gnt=2.Max Lat=24.
    I/O at 0xd400 [0xd4ff].
    Non-prefetchable 32 bit memory at 0xdfff0000 [0xdfff0fff].
    Bus 0, device 1, function 6:
    Modem: Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link HAMR5600 compatible) (rev 160).
    IRQ 10.
    Master Capable. Latency=32. Min Gnt=52.Max Lat=11.
    I/O at 0xdc00 [0xdcff].
    I/O at 0xd800 [0xd87f].
    Bus 0, device 2, function 0:
    PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).
    Master Capable. No bursts. Min Gnt=10.
    Bus 0, device 5, function 0:
    Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16).
    IRQ 10.
    Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
    I/O at 0xd000 [0xd0ff].
    Non-prefetchable 32 bit memory at 0xdffc0000 [0xdffc00ff].
    Bus 1, device 0, function 0:
    VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 49).
    Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
    Non-prefetchable 32 bit memory at 0xdfee0000 [0xdfefffff].
    I/O at 0xac80 [0xacff].

  16. #16
    Administrador Avatar de Fernando
    Ingresso
    Jul 2001
    Localização
    Campinas Area
    Posts
    4.996
    Posts de Blog
    4

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    Quanto ao touchpad, voce configurou o kernel para reconhecer ele como touchpad?

    device drivers/input device support/event interface/mice/ps-2/synaptics touchpad


    Voce ta usando o bare.i como imagem dele?
    Tenta usar outra imagem de kernel pra ele, pode ser este o problema, boota com o CD e roda o lilo denovo (linux -r).


    Sem contar que o proprio mpparse ja acusa o bug neh heheh:

    /usr/src/linux/arch/i386/kernel/mpparse.c: * NOTE! There are Linux loaders that will corrupt the EBDA
    /usr/src/linux/arch/i386/kernel/mpparse.c: printk(KERN_WARNING "WARNING: MP table in the EBDA can be UNSAFE, contact [email protected] if you experience SMP problems!\n");


    De qualquer forma eu acho que se voce bootar com o CD e simplesmente re-executar o lilo ele vai funcionar certinho...

  17. #17

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    E o config e o config e o config??????????
    Esqueceu dele????

  18. #18
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    esqueci do config...mando logo apos o meio-dia...o problema do EBDA eu resolvi...baixei a ultima versao do lilo e instalei...funcionou...Dai entrou...so que nao achou minha placa de rede Realtek 8139too e reclamou da ide tbm!?? Lembro que no 2.4.20 tudo funcionava blz...

  19. #19
    luisoft
    Visitante

    Padrão problemas ao atualizar kernel 2.4.20 para 2.6.5

    ah me esqueci...depois disso tentei recompilar novamente...dessa vez tirei o suporte a emulacao scsi...e a varias outras coisas que nem me lembro...mas dai nem deu boot novamente... Ficou Loading 2.6.5 . e parou nisso sem mensagem nenhuma... uma pergunta: Tenho q ter suporte a EIDE? ou basta IDE? Tinha posto suporte ao antigo /proc/pci mas da vez que consegui bootar ele nao havia criado o /proc/pci... e coloquei suporte como built-in e nao como modulo... coisas estranhas....

  20. #20
    luisoft
    Visitante

    Padrão ai vai o meu config

    ok la vai meu config... essa ultima configuracao nem conseguir fazer o boot:


    #
    # Automatically generated make config: don't edit
    #
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_CLEAN_COMPILE=y
    CONFIG_STANDALONE=y
    CONFIG_BROKEN_ON_SMP=y

    #
    # General setup
    #
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_SYSCTL=y
    CONFIG_LOG_BUF_SHIFT=14
    CONFIG_HOTPLUG=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    # CONFIG_MODULE_UNLOAD is not set
    CONFIG_OBSOLETE_MODPARM=y
    # CONFIG_MODVERSIONS is not set
    CONFIG_KMOD=y

    #
    # Processor type and features
    #
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    CONFIG_M486=y
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    # CONFIG_MPENTIUM4 is not set
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    CONFIG_X86_GENERIC=y
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_X86_PPRO_FENCE=y
    CONFIG_X86_F00F_BUG=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_ALIGNMENT_16=y
    CONFIG_X86_INTEL_USERCOPY=y
    # CONFIG_HPET_TIMER is not set
    # CONFIG_HPET_EMULATE_RTC is not set
    # CONFIG_SMP is not set
    # CONFIG_PREEMPT is not set
    # CONFIG_X86_UP_APIC is not set
    # CONFIG_X86_MCE is not set
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    CONFIG_MICROCODE=m
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m

    #
    # Firmware Drivers
    #
    # CONFIG_EDD is not set
    CONFIG_NOHIGHMEM=y
    # CONFIG_HIGHMEM4G is not set
    # CONFIG_HIGHMEM64G is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_REGPARM is not set

    #
    # Power management options (ACPI, APM)
    #
    # CONFIG_PM is not set

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    # CONFIG_ACPI is not set

    #
    # CPU Frequency scaling
    #
    # CONFIG_CPU_FREQ is not set

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    CONFIG_PCI_GOBIOS=y
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    # CONFIG_PCI_GOANY is not set
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_LEGACY_PROC=y
    CONFIG_PCI_NAMES=y
    CONFIG_ISA=y
    CONFIG_EISA=y
    CONFIG_EISA_VLB_PRIMING=y
    CONFIG_EISA_PCI_EISA=y
    CONFIG_EISA_VIRTUAL_ROOT=y
    CONFIG_EISA_NAMES=y
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set

    #
    # PCMCIA/CardBus support
    #
    # CONFIG_PCMCIA is not set
    CONFIG_PCMCIA_PROBE=y

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=m
    CONFIG_BINFMT_MISC=m

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    # CONFIG_FW_LOADER is not set

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=y
    CONFIG_PARPORT_PC=y
    CONFIG_PARPORT_PC_CML1=y
    CONFIG_PARPORT_SERIAL=y
    # CONFIG_PARPORT_PC_FIFO is not set
    # CONFIG_PARPORT_PC_SUPERIO is not set
    # CONFIG_PARPORT_OTHER is not set
    CONFIG_PARPORT_1284=y

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    CONFIG_ISAPNP=y
    # CONFIG_PNPBIOS is not set

    #
    # Block devices
    #
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_DEV_XD is not set
    CONFIG_PARIDE=y
    CONFIG_PARIDE_PARPORT=y

    #
    # Parallel IDE high-level drivers
    #
    CONFIG_PARIDE_PD=y
    CONFIG_PARIDE_PCD=y
    CONFIG_PARIDE_PF=y
    # CONFIG_PARIDE_PT is not set
    CONFIG_PARIDE_PG=y

    #
    # Parallel IDE protocol modules
    #
    # CONFIG_PARIDE_ATEN is not set
    # CONFIG_PARIDE_BPCK is not set
    # CONFIG_PARIDE_BPCK6 is not set
    # CONFIG_PARIDE_COMM is not set
    # CONFIG_PARIDE_DSTR is not set
    # CONFIG_PARIDE_FIT2 is not set
    # CONFIG_PARIDE_FIT3 is not set
    # CONFIG_PARIDE_EPAT is not set
    # CONFIG_PARIDE_EPIA is not set
    # CONFIG_PARIDE_FRIQ is not set
    # CONFIG_PARIDE_FRPW is not set
    # CONFIG_PARIDE_KBIC is not set
    # CONFIG_PARIDE_KTTI is not set
    # CONFIG_PARIDE_ON20 is not set
    # CONFIG_PARIDE_ON26 is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    CONFIG_BLK_DEV_LOOP=y
    # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    CONFIG_BLK_DEV_NBD=y
    # CONFIG_BLK_DEV_CARMEL is not set
    # CONFIG_BLK_DEV_RAM is not set
    # CONFIG_LBD is not set

    #
    # ATA/ATAPI/MFM/RLL support
    #
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    # CONFIG_IDEDISK_MULTI_MODE is not set
    # CONFIG_IDEDISK_STROKE is not set
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    # CONFIG_IDE_TASK_IOCTL is not set
    # CONFIG_IDE_TASKFILE_IO is not set

    #
    # IDE chipset support/bugfixes
    #
    CONFIG_IDE_GENERIC=y
    CONFIG_BLK_DEV_CMD640=y
    # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=y
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    CONFIG_BLK_DEV_ADMA=y
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_ATIIXP is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    # CONFIG_BLK_DEV_PIIX is not set
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    CONFIG_BLK_DEV_SIS5513=y
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_IDE_CHIPSETS is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    # CONFIG_SCSI is not set

    #
    # Old CD-ROM drivers (not SCSI, not IDE)
    #
    CONFIG_CD_NO_IDESCSI=y
    # CONFIG_AZTCD is not set
    # CONFIG_GSCD is not set
    CONFIG_SBPCD=y
    # CONFIG_MCD is not set
    # CONFIG_MCDX is not set
    # CONFIG_OPTCD is not set
    # CONFIG_CM206 is not set
    # CONFIG_SJCD is not set
    # CONFIG_ISP16_CDI is not set
    # CONFIG_CDU31A is not set
    # CONFIG_CDU535 is not set

    #
    # Multi-device support (RAID and LVM)
    #
    # CONFIG_MD is not set

    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set

    #
    # IEEE 1394 (FireWire) support
    #
    # CONFIG_IEEE1394 is not set

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Networking support
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=y
    # CONFIG_PACKET_MMAP is not set
    CONFIG_NETLINK_DEV=y
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    CONFIG_IP_MULTIPLE_TABLES=y
    CONFIG_IP_ROUTE_FWMARK=y
    CONFIG_IP_ROUTE_NAT=y
    CONFIG_IP_ROUTE_MULTIPATH=y
    CONFIG_IP_ROUTE_TOS=y
    CONFIG_IP_ROUTE_VERBOSE=y
    CONFIG_IP_PNP=y
    CONFIG_IP_PNP_DHCP=y
    CONFIG_IP_PNP_BOOTP=y
    CONFIG_IP_PNP_RARP=y
    CONFIG_NET_IPIP=y
    CONFIG_NET_IPGRE=y
    # CONFIG_NET_IPGRE_BROADCAST is not set
    CONFIG_IP_MROUTE=y
    # CONFIG_IP_PIMSM_V1 is not set
    # CONFIG_IP_PIMSM_V2 is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set

    #
    # IP: Virtual Server Configuration
    #
    # CONFIG_IP_VS is not set
    # CONFIG_IPV6 is not set
    # CONFIG_DECNET is not set
    # CONFIG_BRIDGE is not set
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set

    #
    # IP: Netfilter Configuration
    #
    CONFIG_IP_NF_CONNTRACK=y
    CONFIG_IP_NF_FTP=y
    CONFIG_IP_NF_IRC=y
    CONFIG_IP_NF_TFTP=y
    CONFIG_IP_NF_AMANDA=y
    CONFIG_IP_NF_QUEUE=y
    CONFIG_IP_NF_IPTABLES=y
    CONFIG_IP_NF_MATCH_LIMIT=y
    CONFIG_IP_NF_MATCH_IPRANGE=y
    CONFIG_IP_NF_MATCH_MAC=y
    CONFIG_IP_NF_MATCH_PKTTYPE=y
    CONFIG_IP_NF_MATCH_MARK=y
    CONFIG_IP_NF_MATCH_MULTIPORT=y
    CONFIG_IP_NF_MATCH_TOS=y
    CONFIG_IP_NF_MATCH_RECENT=y
    CONFIG_IP_NF_MATCH_ECN=y
    CONFIG_IP_NF_MATCH_DSCP=y
    CONFIG_IP_NF_MATCH_AH_ESP=y
    CONFIG_IP_NF_MATCH_LENGTH=y
    CONFIG_IP_NF_MATCH_TTL=y
    CONFIG_IP_NF_MATCH_TCPMSS=y
    CONFIG_IP_NF_MATCH_HELPER=y
    CONFIG_IP_NF_MATCH_STATE=y
    CONFIG_IP_NF_MATCH_CONNTRACK=y
    CONFIG_IP_NF_MATCH_OWNER=y
    CONFIG_IP_NF_FILTER=y
    CONFIG_IP_NF_TARGET_REJECT=y
    CONFIG_IP_NF_NAT=y
    CONFIG_IP_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=y
    CONFIG_IP_NF_TARGET_REDIRECT=y
    CONFIG_IP_NF_TARGET_NETMAP=y
    CONFIG_IP_NF_TARGET_SAME=y
    CONFIG_IP_NF_NAT_LOCAL=y
    # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
    CONFIG_IP_NF_NAT_IRC=y
    CONFIG_IP_NF_NAT_FTP=y
    CONFIG_IP_NF_NAT_TFTP=y
    CONFIG_IP_NF_NAT_AMANDA=y
    CONFIG_IP_NF_MANGLE=y
    CONFIG_IP_NF_TARGET_TOS=y
    CONFIG_IP_NF_TARGET_ECN=y
    CONFIG_IP_NF_TARGET_DSCP=y
    CONFIG_IP_NF_TARGET_MARK=y
    CONFIG_IP_NF_TARGET_CLASSIFY=y
    CONFIG_IP_NF_TARGET_LOG=y
    CONFIG_IP_NF_TARGET_ULOG=y
    CONFIG_IP_NF_TARGET_TCPMSS=y
    CONFIG_IP_NF_ARPTABLES=y
    CONFIG_IP_NF_ARPFILTER=y
    CONFIG_IP_NF_ARP_MANGLE=y
    CONFIG_XFRM=y
    # CONFIG_XFRM_USER is not set

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_SCTP is not set
    # CONFIG_ATM is not set
    # CONFIG_VLAN_8021Q is not set
    CONFIG_LLC=y
    # CONFIG_LLC2 is not set
    CONFIG_IPX=y
    CONFIG_IPX_INTERN=y
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # CONFIG_NET_FASTROUTE is not set
    # CONFIG_NET_HW_FLOWCONTROL is not set

    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    CONFIG_NETDEVICES=y

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set
    CONFIG_DUMMY=y
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_ETHERTAP is not set
    # CONFIG_NET_SB1000 is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    CONFIG_NET_VENDOR_3COM=y
    # CONFIG_EL1 is not set
    # CONFIG_EL2 is not set
    # CONFIG_ELPLUS is not set
    # CONFIG_EL16 is not set
    # CONFIG_EL3 is not set
    # CONFIG_3C515 is not set
    # CONFIG_VORTEX is not set
    # CONFIG_TYPHOON is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set

    #
    # Tulip family network device support
    #
    # CONFIG_NET_TULIP is not set
    # CONFIG_AT1700 is not set
    # CONFIG_DEPCA is not set
    # CONFIG_HP100 is not set
    # CONFIG_NET_ISA is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_AC3200 is not set
    # CONFIG_APRICOT is not set
    # CONFIG_B44 is not set
    # CONFIG_FORCEDETH is not set
    # CONFIG_CS89x0 is not set
    # CONFIG_DGRS is not set
    # CONFIG_EEPRO100 is not set
    # CONFIG_E100 is not set
    # CONFIG_LNE390 is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_NE3210 is not set
    # CONFIG_ES3210 is not set
    # CONFIG_8139CP is not set
    CONFIG_8139TOO=y
    # CONFIG_8139TOO_PIO is not set
    CONFIG_8139TOO_TUNE_TWISTER=y
    CONFIG_8139TOO_8129=y
    # CONFIG_8139_OLD_RX_RESET is not set
    CONFIG_8139_RXBUF_IDX=2
    CONFIG_SIS900=y
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_NET_POCKET is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SIS190 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_TIGON3 is not set

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_IXGB is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    CONFIG_PLIP=y
    CONFIG_PPP=y
    # CONFIG_PPP_MULTILINK is not set
    CONFIG_PPP_FILTER=y
    CONFIG_PPP_ASYNC=y
    CONFIG_PPP_SYNC_TTY=y
    CONFIG_PPP_DEFLATE=y
    CONFIG_PPP_BSDCOMP=y
    # CONFIG_PPPOE is not set
    CONFIG_SLIP=y
    CONFIG_SLIP_COMPRESSED=y
    CONFIG_SLIP_SMART=y
    # CONFIG_SLIP_MODE_SLIP6 is not set

    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set
    # CONFIG_RCPCI is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set

    #
    # Amateur Radio support
    #
    # CONFIG_HAMRADIO is not set

    #
    # IrDA (infrared) support
    #
    # CONFIG_IRDA is not set

    #
    # Bluetooth support
    #
    # CONFIG_BT is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input I/O drivers
    #
    # CONFIG_GAMEPORT is not set
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PARKBD is not set
    # CONFIG_SERIO_PCIPS2 is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_INPORT is not set
    # CONFIG_MOUSE_LOGIBM is not set
    # CONFIG_MOUSE_PC110PAD is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    CONFIG_UNIX98_PTYS=y
    # CONFIG_LEGACY_PTYS is not set
    CONFIG_PRINTER=y
    # CONFIG_LP_CONSOLE is not set
    CONFIG_PPDEV=y
    # CONFIG_TIPAR is not set
    # CONFIG_QIC02_TAPE is not set

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    # CONFIG_HW_RANDOM is not set
    # CONFIG_NVRAM is not set
    CONFIG_RTC=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set
    CONFIG_AGP=y
    # CONFIG_AGP_ALI is not set
    # CONFIG_AGP_ATI is not set
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    # CONFIG_AGP_INTEL is not set
    # CONFIG_AGP_INTEL_MCH is not set
    # CONFIG_AGP_NVIDIA is not set
    CONFIG_AGP_SIS=y
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_EFFICEON is not set
    # CONFIG_DRM is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HANGCHECK_TIMER is not set

    #
    # I2C support
    #
    # CONFIG_I2C is not set

    #
    # Misc devices
    #
    # CONFIG_IBM_ASM is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set

    #
    # Graphics support
    #
    CONFIG_FB=y
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_IMSTT is not set
    CONFIG_FB_VGA16=y
    CONFIG_FB_VESA=y
    # CONFIG_VIDEO_SELECT is not set
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_RIVA is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON_OLD is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    CONFIG_FB_SIS=y
    CONFIG_FB_SIS_300=y
    # CONFIG_FB_SIS_315 is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_VIRTUAL is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y
    # CONFIG_FRAMEBUFFER_CONSOLE is not set

    #
    # Logo configuration
    #
    # CONFIG_LOGO is not set

    #
    # Sound
    #
    CONFIG_SOUND=y

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=y
    CONFIG_SND_TIMER=y
    CONFIG_SND_PCM=y
    CONFIG_SND_RAWMIDI=y
    # CONFIG_SND_SEQUENCER is not set
    # CONFIG_SND_MIXER_OSS is not set
    # CONFIG_SND_PCM_OSS is not set
    # CONFIG_SND_RTCTIMER is not set
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    CONFIG_SND_MPU401_UART=y
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set

    #
    # ISA devices
    #
    # CONFIG_SND_AD1816A is not set
    # CONFIG_SND_AD1848 is not set
    # CONFIG_SND_CS4231 is not set
    # CONFIG_SND_CS4232 is not set
    # CONFIG_SND_CS4236 is not set
    # CONFIG_SND_ES968 is not set
    # CONFIG_SND_ES1688 is not set
    # CONFIG_SND_ES18XX is not set
    # CONFIG_SND_GUSCLASSIC is not set
    # CONFIG_SND_GUSEXTREME is not set
    # CONFIG_SND_GUSMAX is not set
    # CONFIG_SND_INTERWAVE is not set
    # CONFIG_SND_INTERWAVE_STB is not set
    # CONFIG_SND_OPTI92X_AD1848 is not set
    # CONFIG_SND_OPTI92X_CS4231 is not set
    # CONFIG_SND_OPTI93X is not set
    # CONFIG_SND_SB8 is not set
    # CONFIG_SND_SB16 is not set
    # CONFIG_SND_SBAWE is not set
    # CONFIG_SND_WAVEFRONT is not set
    # CONFIG_SND_ALS100 is not set
    # CONFIG_SND_AZT2320 is not set
    # CONFIG_SND_CMI8330 is not set
    # CONFIG_SND_DT019X is not set
    # CONFIG_SND_OPL3SA2 is not set
    # CONFIG_SND_SGALAXY is not set
    # CONFIG_SND_SSCAPE is not set

    #
    # PCI devices
    #
    CONFIG_SND_AC97_CODEC=y
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_HDSP is not set
    CONFIG_SND_TRIDENT=y
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    # CONFIG_SND_INTEL8X0 is not set
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VX222 is not set

    #
    # Open Sound System
    #
    # CONFIG_SOUND_PRIME is not set

    #
    # USB support
    #
    # CONFIG_USB is not set

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set

    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    # CONFIG_EXT2_FS_XATTR is not set
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    # CONFIG_EXT3_FS_POSIX_ACL is not set
    # CONFIG_EXT3_FS_SECURITY is not set
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    CONFIG_REISERFS_FS=y
    # CONFIG_REISERFS_CHECK is not set
    # CONFIG_REISERFS_PROC_INFO is not set
    # CONFIG_JFS_FS is not set
    # CONFIG_XFS_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    CONFIG_QUOTA=y
    # CONFIG_QFMT_V1 is not set
    # CONFIG_QFMT_V2 is not set
    CONFIG_QUOTACTL=y
    CONFIG_AUTOFS_FS=y
    CONFIG_AUTOFS4_FS=y

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_ZISOFS_FS=y
    CONFIG_UDF_FS=m

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_NTFS_FS=m
    # CONFIG_NTFS_DEBUG is not set
    # CONFIG_NTFS_RW is not set

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    # CONFIG_DEVFS_FS is not set
    # CONFIG_DEVPTS_FS_XATTR is not set
    CONFIG_TMPFS=y
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    CONFIG_NFS_FS=y
    CONFIG_NFS_V3=y
    # CONFIG_NFS_V4 is not set
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=y
    CONFIG_NFSD_V3=y
    # CONFIG_NFSD_V4 is not set
    # CONFIG_NFSD_TCP is not set
    # CONFIG_ROOT_NFS is not set
    CONFIG_LOCKD=y
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=y
    CONFIG_SUNRPC=y
    # CONFIG_RPCSEC_GSS_KRB5 is not set
    CONFIG_SMB_FS=y
    # CONFIG_SMB_NLS_DEFAULT is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_INTERMEZZO_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    # CONFIG_OSF_PARTITION is not set
    # CONFIG_AMIGA_PARTITION is not set
    # CONFIG_ATARI_PARTITION is not set
    # CONFIG_MAC_PARTITION is not set
    CONFIG_MSDOS_PARTITION=y
    # CONFIG_BSD_DISKLABEL is not set
    # CONFIG_MINIX_SUBPARTITION is not set
    # CONFIG_SOLARIS_X86_PARTITION is not set
    # CONFIG_UNIXWARE_DISKLABEL is not set
    CONFIG_LDM_PARTITION=y
    # CONFIG_LDM_DEBUG is not set
    # CONFIG_NEC98_PARTITION is not set
    # CONFIG_SGI_PARTITION is not set
    # CONFIG_ULTRIX_PARTITION is not set
    # CONFIG_SUN_PARTITION is not set
    # CONFIG_EFI_PARTITION is not set

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="cp437"
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    CONFIG_NLS_CODEPAGE_860=m
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    CONFIG_NLS_ISO8859_1=y
    CONFIG_NLS_ISO8859_2=m
    CONFIG_NLS_ISO8859_3=m
    CONFIG_NLS_ISO8859_4=m
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    CONFIG_NLS_UTF8=m

    #
    # Profiling support
    #
    # CONFIG_PROFILING is not set

    #
    # Kernel hacking
    #
    # CONFIG_DEBUG_KERNEL is not set
    CONFIG_EARLY_PRINTK=y
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_FRAME_POINTER is not set

    #
    # Security options
    #
    # CONFIG_SECURITY is not set

    #
    # Cryptographic options
    #
    # CONFIG_CRYPTO is not set

    #
    # Library routines
    #
    CONFIG_CRC32=y
    CONFIG_ZLIB_INFLATE=y
    CONFIG_ZLIB_DEFLATE=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_PC=y