+ Responder ao Tópico



  1. #1

    Padrão Ping alto, dmesg estranho, s.o.s.

    Amigos, tenho um pedaço da minha rede que é um canal entre um AP-1000 e do outro lado uma maquina linux com card pcmcia ORINOCO. O sinal entre os pontos é excelente mas tem horas que o ping fica muito alto até mesmo com baixo trafego.

    Abaixo passo o ping e o dmesg do linux:

    Ping

    PING gw-sg.brasweb.com.br (192.168.4.2): 56 octets data
    64 octets from 192.168.4.2: icmp_seq=0 ttl=64 time=1559.8 ms
    wrong data byte #0 should be 0x13 but was 0x1212 be ef 41 14 dc 0 0
    8 9 a b c d e f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27
    28 29 2a 2b 2c 2d 2e 2f
    64 octets from 192.168.4.2: icmp_seq=1 ttl=64 time=1706.3 ms
    wrong data byte #0 should be 0x14 but was 0x1313 be ef 41 e6 d7 0 0
    8 9 a b c d e f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27
    28 29 2a 2b 2c 2d 2e 2f
    64 octets from 192.168.4.2: icmp_seq=2 ttl=64 time=1902.3 ms
    wrong data byte #0 should be 0x15 but was 0x1414 be ef 41 dc d7 0 0
    8 9 a b c d e f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27
    28 29 2a 2b 2c 2d 2e 2f



    FINAL DO DMESG




    eth2: New link status: AP Out of Range (0004)
    eth2: New link status: AP In Range (0005)
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth3: MAC controller error (WTERR). Ignoring.
    eth3: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: MAC controller error (WTERR). Ignoring.
    eth2: New link status: AP Out of Range (0004)
    eth2: New link status: AP In Range (0005)
    eth2: New link status: Disconnected (0002)
    eth2: New link status: Connected (0001)
    eth2: New link status: AP Out of Range (0004)
    eth2: New link status: AP In Range (0005)
    eth2: New link status: Disconnected (0002)
    eth2: New link status: Connected (0001)
    eth2: MAC controller error (WTERR). Ignoring.
    eth3: MAC controller error (WTERR). Ignoring.
    eth2: New link status: AP Out of Range (0004)
    eth2: New link status: AP In Range (0005)
    eth2: New link status: Disconnected (0002)
    eth2: New link status: Connected (0001)


    Alguem tem ideia do que esteja acontecendo e alguma solucao para isso.

    Outra coisa, nesse momento o trafego estava na casa de 1 Mbps, mas ocorre esse problema até com trafego de 256 Kbps.

    Valeu ...

  2. #2
    fabianocese
    Visitante

    Padrão ping alto

    ola. qual ap esta usando? ela controla mac? ta em ad-hoc? tem wep?

    qual a qualidade do link?

  3. #3

    Padrão Ping alto, dmesg estranho, s.o.s.

    Ja tive esse problema varias veses, umas erram apens mal contato no cartao com o adaptador, outra ate problemas no cartao, principlamente em cartoes Prism, e ate mal contato no slot do PC..