Postado originalmente por
spyderlinux
Senhores(as), Bom Dia.
Venho aqui solicitar o auxilio de vocês.
Tenho o Suse Enterprise dentro de uma Blade.
Inseri um hd externo de 1 TB, no dmesg informa que foi reconhecido.
[21945.122157] scsi 5:0:0:0: Direct-Access Seagate FreeAgent GoFlex 214 PQ: 0 ANSI: 0
[21945.122383] sd 5:0:0:0: Attached scsi generic sg4 type 0
[21945.123150] sd 5:0:0:0: [sda]
1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
[21945.123986] sd 5:0:0:0: [sda] Write Protect is off
[21945.123989] sd 5:0:0:0: [sda] Mode Sense: 0f 00 00 00
[21945.124741] sd 5:0:0:0: [sda] No Caching mode page present
[21945.124743] sd 5:0:0:0: [sda] Assuming drive cache: write through
[21945.126980] sd 5:0:0:0: [sda] No Caching mode page present
[21945.126982] sd 5:0:0:0: [sda] Assuming drive cache: write through
[21945.168072] sda: sda1
Reconheci os módulos:
modprobe uhci-hcd
modprobe ohci-hcd
modprobe ehci-hcd
ainda continuando no dmesg, aparece a seguinte informação:
[37393.177457] FAT-fs (sda1): bogus number of reserved sectors
[37393.177461] FAT-fs (sda1): Can't find a valid FAT filesystem
[38188.750164] CIFS VFS: Error connecting to socket. Aborting operation
[38188.750279] CIFS VFS: cifs_mount failed w/return code = -115
[38202.835466] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel rele
ase 3.1
[38202.940190] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[38202.940200] CIFS VFS: Send error in SessSetup = -13
[38202.993565] CIFS VFS: cifs_mount failed w/return code = -13
[38238.223944] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[38238.223953] CIFS VFS: Send error in SessSetup = -13
[38238.282669] CIFS VFS: cifs_mount failed w/return code = -13
[38263.341191] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[38263.341199] CIFS VFS: Send error in SessSetup = -13
[38263.405945] CIFS VFS: cifs_mount failed w/return code = -13
[41144.503585] usb 1-6: USB disconnect, device number 5
última linha do dmesg:
[8675217.150005] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Inseri em outro Linux e consegui montar, desmontei e formatei como ext3.
Coloquei na Blade onde fica o SO, e NADA.
Algum procedimento cabível para a situação?
Att,