- MALDITO SAMBA!!!!!!
+ Responder ao Tópico
-
MALDITO SAMBA!!!!!!
To com um big bug no samba daki da empresa....
É o seguinte, já tentei configurar ele de todo jeito e não loga, ele dá senha inválida, porém tenho outro samba funcionando aki com o mesmo smb.conf e esse funciona normal, detalhe, é o mesmo samba e a mesma distro, a única diferença é que na máquina que funciona foi instalado full e na que não funciona eu deixei de instalar alguns pacotes porque precisava compilar o php, porém o resto é igual, o que pode ser???
-
MALDITO SAMBA!!!!!!
cara tive um pau aki pq eu copiei um smb.conf de uma maquina pra outra! tive apagar, ae editar ele denovo colocando as mesmas opções.... ae funfou
-
MALDITO SAMBA!!!!!!
Valew 1c3 vou testar depois retorno...
-
MALDITO SAMBA!!!!!!
NADA!!!!!!!!! Acha que é melhor instalar outro samba???
Digo compilar um???
-
MALDITO SAMBA!!!!!!
vc esta com security = USER?
vc criou os usuarios no samba? ou apenas colocou eles no smb.conf?
caso fez tudo isso.. tenta recompilar o samba, as vezes funciona
-
MALDITO SAMBA!!!!!!
Olá Pessoal !!
Não sei quanto à vocês, mas já estou de saco cheio de ficar
atualizando os programas com tantos bugs que estão aparecendo
neste último mês ? Tá parecendo o ruwindows!!!
Também tive problemas com o samba ultimamente !
Quando ia desligar os servidos NBM, dava mensagem de
erro, mas ligava os serviços sem nenhuma mensagem.
Outro problema que tive foi não conseguir visualisar os
arquivos numa pasta compartilhada no windows e o mesmo
visualizava no linux. Apaguei os fontes e instalei através dos
RPMs e agora está beleza. Não me pergunte o porquê ??!!
hasta....Junior
-
MALDITO SAMBA!!!!!!
uso slack + arquivos .tar.gz
e nao estou com problema em nenhum programa..
nem mesmo o samba que muita gente reclama aqui roda super estavel, aqui e nos meus clientes também
-
MALDITO SAMBA!!!!!!
Estou rodando cl7, se eu compilar não vai dar conflito com o samba antigo???
-
MALDITO SAMBA!!!!!!
pode dar uns paus.... faça um backup das configuracoes e remova o antigo
-
MALDITO SAMBA!!!!!!
Meu eu uso o samba faz mais de um ano e nunca deu pau pra mim, unica coisa foi em relação a sistema clipper, eu uso o conectiva 8 atualmente e está tudo certinho.
naum fiz nenhum update nada, só configurei o smb.conf.
Agora se vc for passar do cl7 para um samba atula instala com rpm -uvh q é para dar update ele naum muda nada, pega todas as configurações do antigo... e toma cuidado com as permissões, ou seja, aquele negócio de oculto, arquivo, sistema...
falou..
-
MALDITO SAMBA!!!!!!
Mediante todas as opniões já mencioandas, posso dizer que tenho vários servidores samba rodando inclusive vários servidores mantendo relações de compartilhamentos e tudo funciona uma beleza.
Lembrando que não é apenas copiar o smb.conf existe toda uma estrutura de compartilhamentos, usuários do sistema e usuários do samba dentre outros parametros, verifique esses detalhes e vc com certeza resolverá seus problemas.
Boa Sorte!
-
MALDITO SAMBA!!!!!!
Tive um problema semelhante .....
o nome do adaptador estava diferente do nome do hosts....
ve se eh isso!
<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2003-04-17 17:22, Notielc wrote:
Meu eu uso o samba faz mais de um ano e nunca deu pau pra mim, unica coisa foi em relação a sistema clipper, eu uso o conectiva 8 atualmente e está tudo certinho.
naum fiz nenhum update nada, só configurei o smb.conf.
Agora se vc for passar do cl7 para um samba atula instala com rpm -uvh q é para dar update ele naum muda nada, pega todas as configurações do antigo... e toma cuidado com as permissões, ou seja, aquele negócio de oculto, arquivo, sistema...
falou..
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE> <IMG SRC="images/forum/icons/icon_wink.gif">
-
MALDITO SAMBA!!!!!!
hummm....
seguinte, vc falo q fez uma instalacao completa na makina q funciona, e outra "apropriada" na maquina d supostamente deveria roda o samba...
da uma olhada nos logs... ve oq ele ta pedindo....
isso provavelmente eh falha d dependencias...
sobre o lance do samba nunca ter dado pau... sigiro q corram atraz da versao mais recente...
TODAS as versoes anteriores a 2.2.8 tão vulneraveis...
-
MALDITO SAMBA!!!!!!
<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2003-04-17 14:08, Futuremax wrote:
Estou rodando cl7, se eu compilar não vai dar conflito com o samba antigo???
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>
como o Ice_Man disse.. antes de qualquer cosia faça um backup dos arquivos de configuração...remova primeiro o antigo e tente instalar um novo...
eu não gosto de rpm, os pré compilados da vida.. acho mais interessante e seguro pegar o source e instalar..
caso vc queria tentar assim, a instalação é bem simples
descompacte o arquivo
tar -zxvf samba...tar.gz
entre no diretorio do samba e depois dentro do source
pra compilar apenas ./configure
se vc for usar o smbmount, poe assim no configure
./configure --with-smbmount
o diretorio que vai cair é em /usr/local/samba
se quiser mudar
./configure --prefix=/diretorio onde vc quer
depois
make
make install
make installbin
pronto, samba rodando legal.
eu uso ele a um tempao, coisa de mais de 3 anos eu acho, e nunca tive problema com nenhuma atualização..
qualquer coisa estamos ae
-
MALDITO SAMBA!!!!!!
Olá Pessoal !!
O que eu quis dizer é que o meu samba estava rodando
redondinho, mas após ler que estava bugado e tinha a versão
2.2.7a, depois que atualizei, bichou de vez......
Após atualizar para a 2.2.8, voltou tudo a funcionar e sem
que eu fizesse nenhuma alteração nos meus arquivos de configuração.
Tá parecendo os patchs do tio Bill.....
hasta.....Junior
-
MALDITO SAMBA!!!!!!
NEKA!!! NADA!!!
Nem compilando, será pau da distro???
-
MALDITO SAMBA!!!!!!
Cara de uma olhada no samba no linuxconf
na opcao padra existem 3 escolhas
nao gerenciado - contas e senhas - So
o meu conectiva 7.0 eu coloquei em nao gerenciado
sl-linux
-
MALDITO SAMBA!!!!!!
Muita calma.. Você tá apontando o seu password server pra o /etc/passwd? Tem que rever o arquivo, porque você não manda ele aqui pra gente ver o que rola?
[´s]
-
MALDITO SAMBA!!!!!!
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = GERENCIA
# server string is the equivalent of the NT Description field
server string = Samba Server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you´ll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
printing = lprng
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Log level (0=none, 1=normal, 2 and above not recommended for production box)
debug level = 1
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/smbpasswd
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with ´encrypt passwords´ and ´smb passwd file´ above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
; username map = /etc/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don´t want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don´t use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# All NetBIOS names must be resolved to IP Addresses
# ´Name Resolve Order´ allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it´s WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
unix password sync = yes
encrypt passwords = yes
map to guest = never
password level = 0
null passwords = yes
os level = 0
preferred master = no
domain master = no
wins support = no
dead time = 0
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = yes
writable = yes
available = yes
public = yes
only user = no
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user´s home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user ´guest account´ to print
guest ok = no
writable = no
printable = yes
-
MALDITO SAMBA!!!!!!