galera meu mikrotik apos eu colocar a regra de cache full nao controla o up load...
quem pode me ajudar?
agradeço o contato
abraços
galera meu mikrotik apos eu colocar a regra de cache full nao controla o up load...
quem pode me ajudar?
agradeço o contato
abraços
Última edição por Magal; 18-03-2010 às 10:54. Razão: Correção do título
E ai amigo.. tente ser mais especifico pra nos ter uma ideia do problema, se possivel dando um export.. abraço
Amigo , como tmelooliveira disse um export ajudaria ver se ta faltando algo , mas da uma olhada nas regra do queues .. pois geralmente a regras do cache full libera 10M interno, não usa o seu link .. se tiver errado alguem da um toque
ta ae galera é isso mesmo ?
cable-settings=default speed=100Mbps comment="" disabled=no
set Clientes name="Clientes" mtu=1500 mac-address=00:13:F7:A7:3D:C1 \
arp=enabled disable-running-check=yes auto-negotiation=yes full-duplex=yes \
cable-settings=default speed=100Mbps comment="" disabled=no
/ interface wireless security-profiles
set default name="default" mode=none authentication-types="" \
set Clientes name="Clientes" mtu=1500 mac-address=00:13:F7:A7:3D:C1 \
arp=enabled disable-running-check=yes auto-negotiation=yes full-duplex=yes \
cable-settings=default speed=100Mbps comment="" disabled=no
/ interface wireless security-profiles
set default name="default" mode=none authentication-types="" \
unicast-ciphers="" group-ciphers="" wpa-pre-shared-key="" \
wpa2-pre-shared-key="" eap-methods=passthrough tls-mode=no-certificates \
tls-certificate=none static-algo-0=none static-key-0="" static-algo-1=none \
static-key-1="" static-algo-2=none static-key-2="" static-algo-3=none \
static-key-3="" static-transmit-key=key-0 static-sta-private-algo=none \
static-sta-private-key="" radius-mac-authentication=no group-key-update=5m
/ interface wireless align
set frame-size=300 active-mode=yes receive-all=no \
audio-monitor=00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 ssid-all=no \
frames-per-second=25 audio-min=-100 audio-max=-20
/ interface wireless snooper
set multiple-channels=yes channel-time=200ms receive-errors=no
/ interface wireless sniffer
set multiple-channels=no channel-time=200ms only-headers=no receive-errors=no \
memory-limit=10 file-name="" file-limit=10 streaming-enabled=no \
streaming-server=0.0.0.0 streaming-max-rate=0
/ interface l2tp-server server
set enabled=no max-mtu=1460 max-mru=1460 \
authentication=pap,chap,mschap1,mschap2 default-profile=default-encryption
/ interface pptp-server server
set enabled=no max-mtu=1460 max-mru=1460 authentication=mschap1,mschap2 \
keepalive-timeout=30 default-profile=default-encryption
/ interface pppoe-client
add name="pppoe-out1" max-mtu=1480 max-mru=1480 interface="Link adsl" \
user="[email protected]" password="7133963401" profile=default \
service-name="" ac-name="" add-default-route=yes dial-on-demand=no \
use-peer-dns=yes allow=pap,chap,mschap1,mschap2 disabled=no
/ ip pool
add name="hs-pool-3" ranges=10.5.50.2-10.5.50.254
/ ip telephony region
/ ip telephony gatekeeper
set gatekeeper=none remote-id="" remote-address=0.0.0.0
/ ip telephony aaa
set use-radius-accounting=no interim-update=0s
/ ip telephony codec
move G.711-uLaw-64k/sw
move G.711-ALaw-64k/sw
move G.729A-8k/sw
move G.729-8k/sw
move G.723.1-6.3k/sw
move GSM-06.10-13.2k/sw
move LPC-10-2.5k/sw
/ ip accounting
set enabled=no account-local-traffic=no threshold=256
/ ip accounting web-access
set accessible-via-web=no address=0.0.0.0/0
/ ip service
set telnet port=23 address=0.0.0.0/0 disabled=yes
set ftp port=21 address=0.0.0.0/0 disabled=yes
set www port=80 address=0.0.0.0/0 disabled=no
set ssh port=22 address=0.0.0.0/0 disabled=yes
set www-ssl port=443 address=0.0.0.0/0 certificate=none disabled=yes
/ ip upnp
set enabled=no allow-disable-external-interface=yes show-dummy-rule=yes
/ ip socks
set enabled=no port=1080 connection-idle-timeout=2m max-connections=200
/ ip dns
set primary-dns=200.165.132.154 secondary-dns=200.165.132.148 \
allow-remote-requests=yes cache-size=10240KiB cache-max-ttl=1w
/ ip traffic-flow
set enabled=no interfaces=all cache-entries=4k active-flow-timeout=30m \
inactive-flow-timeout=15s
/ ip address
add address=10.5.50.1/24 network=10.5.50.0 broadcast=10.5.50.255 \
comment="hotspot network" disabled=no
add address=10.5.50.1/24 network=10.5.50.0 broadcast=10.5.50.255 \
interface=Clientes comment="hotspot network" disabled=no
/ ip proxy
set enabled=no port=8080 parent-proxy=0.0.0.0:0 maximal-client-connecions=1000 \
maximal-server-connectons=1000
/ ip proxy access
add dst-port=23-25 action=deny comment="block telnet & spam e-mail relaying" \
disabled=no
/ ip neighbor discovery
set "Link adsl" discover=yes
set pppoe-out1 discover=no
set Clientes discover=yes
et enabled=no allow-disable-external-interface=yes show-dummy-rule=yes
/ ip socks
set enabled=no port=1080 connection-idle-timeout=2m max-connections=200
/ ip dns
set primary-dns=200.165.132.154 secondary-dns=200.165.132.148 \
allow-remote-requests=yes cache-size=10240KiB cache-max-ttl=1w
/ ip traffic-flow
set enabled=no interfaces=all cache-entries=4k active-flow-timeout=30m \
inactive-flow-timeout=15s
/ ip address
add address=10.5.50.1/24 network=10.5.50.0 broadcast=10.5.50.255 \
comment="hotspot network" disabled=no
add address=10.5.50.1/24 network=10.5.50.0 broadcast=10.5.50.255 \
interface=Clientes comment="hotspot network" disabled=no
/ ip proxy
set enabled=no port=8080 parent-proxy=0.0.0.0:0 maximal-client-connecions=1000 \
maximal-server-connectons=1000
/ ip proxy access
add dst-port=23-25 action=deny comment="block telnet & spam e-mail relaying" \
disabled=no
/ ip neighbor discovery
set "Link adsl" discover=yes
set pppoe-out1 discover=no
set Clientes discover=yes
/ ip route
/ ip firewall mangle
add chain=output protocol=tcp src-port=3128 content="X-Cache: HIT" \
action=mark-connection new-connection-mark=squid-connection-HIT \
passthrough=yes comment="Cache-squid" disabled=no
add chain=output connection-mark=squid-connection-HIT action=mark-packet \
new-packet-mark=squid-packet-HIT passthrough=no comment="" disabled=no
add chain=output connection-mark=squid-connection-HIT action=return comment="" \
disabled=no
add chain=forward src-address=10.5.50.0/24 action=mark-connection \
new-connection-mark=test-conn passthrough=yes comment="CONN-MARK" \
disabled=no
add chain=prerouting in-interface=(unknown) src-address=10.5.50.0/24 \
action=mark-packet new-packet-mark="Test up" passthrough=yes comment="" \
disabled=no
add chain=forward in-interface=pppoe-out1 connection-mark=test-conn \
action=mark-packet new-packet-mark="test down" passthrough=no \
comment="Down direct conection" disabled=no
add chain=output out-interface=(unknown) dst-address=10.5.50.0/24 \
action=mark-packet new-packet-mark="test down" passthrough=no \
comment="down via proxy" disabled=no
add chain=forward protocol=icmp action=change-ttl new-ttl=set:30 comment="TTL" \
disabled=no
add chain=forward protocol=tcp tcp-flags=syn action=change-mss new-mss=1360 \
comment="" disabled=no
add chain=output protocol=tcp src-port=8291 src-address-list=clientes \
action=accept comment="Portas sem controle de banda \(winbox, dns, \
etc...\)" disabled=no
add chain=input protocol=udp dst-port=53 src-address-list=clientes \
action=mark-connection new-connection-mark=semqueue passthrough=yes \
comment="" disabled=no
add chain=prerouting protocol=tcp dst-port=53 src-address-list=clientes \
action=mark-connection new-connection-mark=semqueue passthrough=yes \
comment="" disabled=no
add chain=output protocol=tcp dst-port=22 src-address-list=clientes \
action=mark-connection new-connection-mark=semqueue passthrough=yes \
comment="" disabled=no
add chain=prerouting connection-mark=semqueue action=mark-packet \
new-packet-mark=semqueue passthrough=yes comment="" disabled=no
add chain=output connection-mark=semqueue action=return comment="" disabled=no
add chain=prerouting protocol=udp dst-port=5060-5062 action=mark-connection \
new-connection-mark=voip-in passthrough=yes comment="PRIORIZAR TRAFEGO \
VOIP" disabled=no
Tive o mesmo problema, tanto no proxy do slackware( nao uso mais), quanto no cache full do mikrotik(desabilitei o cache)....
se alguem tiver uma solução ai!!!!
obrigado
e ae galera algum se habilita?
aguardo o contato dos especialistas dos forum...
pois mano quando a galera inventa de fazer o tal de up load pra o orkut....
entre outras coisas mais...acaba com a rede,,,
ja agradecendo
abraços
pode perceber que em algumas regras em ( in interface )esta
em unckdown significa que nao esiste interface para regra ou seja vc tem que setar a regra pra uma determinada interfaçe qualquer coisa me me add no msn que eu te explico,,
se te ajudei clique em agradecer
msn [email protected]
olá mano anota meu msn
pra agente converça e voce me explicar melhor
[email protected]
Sobre o upload