Balanceamento com 2 link com cargas diferente ( um 35mb e ou 15mb) um em bridge e o outro roteado...

[OLIVEIRAGO]

Boa noite galera venho ate vcs para saber se há possibilideade de se fazer um load balance nestas condiçoes:
link 1 ( sai da central ja com ppoe e hotspot) 35MB
link 2 ( link roteado) 15MB

estes dois links chegam ate a repetidora há possibilidade de ser feito balanceamento de cargas nestas configuraçoes?
interface link 1 10.1.1.1
interface link 2 10.10.10.1




Grato desde já.

[wdnc5]

Olá amigo, independente de como recebe o link tem como fazer o load balance sim, da uma pesquisada ai no fórum e baixe o programa PCC que ele ira te ajudar a efetuar estas configurações.

NÃO ESQUEÇA DE CLICAR NA ESTRELINHA AI VLW

abraços...

[icebox]

Mostra o que vc já têm para te ajudar-mos
(y)

[brunocemeru]

https://under-linux.org/showthread.php?t=152913

http://routeros.forumpramim.net/t238...ht=balance+pcc

acho q estes te ajudaram.

[Anderson28]

Boa noite galera venho ate vcs para saber se há possibilideade de se fazer um load balance nestas condiçoes:
link 1 ( sai da central ja com ppoe e hotspot) 35MB
link 2 ( link roteado) 15MB

estes dois links chegam ate a repetidora há possibilidade de ser feito balanceamento de cargas nestas configuraçoes?
interface link 1 10.1.1.1
interface link 2 10.10.10.1




Grato desde já.

voce diz que o primeiro link ja sai com as regras e configuraçoes de autenticação dos clientes do ponto 1, dai chega na repetidora onde voce gostaria de balanciar com o outro link que ja esta roteado, isso ao meu meu ver nao daria certo, porque,
Os links deveriam ser balanciados antes de qualquer gerenciamento para com o cliente final.

ex: o link 1 com o link 2 entrando numa Routerboard fazendo o load balance e entregando a a carga na interface de saida.
Routerboard recebendo a carga na interface de entrada e fazendo o gerenciamento (HOTSPOT/PPPoE) para os clientes.
Dai sim quem se conectasse na sua repetidora usaria o link resultante do seu load balance.

[OLIVEIRAGO]

https://under-linux.org/showthread.php?t=152913

http://routeros.forumpramim.net/t238...ht=balance+pcc

acho q estes te ajudaram.

boa noite segue minhas regras para analise:

# ip address --------------------------
/ip address add address=10.1.1.1/24 interface=255.255.255.0
/ip address add address=10.1.1.1/24 interface=255.255.255.0
/ip address add address=10.10.10.1/24 interface=255.255.255.0


# interface pppoe-client ---------------


# ip dns --------------------------------
/ip dns set primary-dns=8.8.8.8
/ip dns set secondary-dns=8.8.4.4
/ip dns set allow-remote-requests=yes




# ip firewall Filter------------------------
/ip firewall filter add action=drop chain=forward comment="BLOQUEIO DE DNS REVERSO" content=velox.user.com.br disabled=no
/ip firewall filter add action=drop chain=forward comment="BLOQUEIO DE DNS REVERSO" content=speed.user.com.br disabled=no
/ip firewall filter add action=drop chain=forward comment="BLOQUEIO DE DNS REVERSO" content=gvt.user.com.br disabled=no
/ip firewall filter add action=accept chain=input disabled=no in-interface=!255.255.255.0 src-address=10.1.1.0/24
/ip firewall filter add action=accept chain=input disabled=no in-interface=!255.255.255.0 src-address=10.1.1.0/24


# ip firewall nat--------------------------
/ip firewall nat add action=masquerade chain=srcnat disabled=no out-interface=255.255.255.0
/ip firewall nat add action=masquerade chain=srcnat disabled=no out-interface=255.255.255.0


# ip firewall mangle------------------------


# LoopBack por link-------------------------
/ ip firewall mangle add action=mark-connection chain=prerouting comment="" connection-state=new disabled=no dst-address-list=LINK0 in-interface=255.255.255.0 new-connection-mark=Sites0 passthrough=yes
/ ip firewall mangle add action=mark-routing chain=prerouting comment="" connection-mark=Sites0 disabled=no in-interface=255.255.255.0 new-routing-mark=Rota0 passthrough=no
/ ip route add gateway=10.1.1.1 routing-mark=Rota0
/ ip firewall mangle add action=mark-connection chain=prerouting comment="" connection-state=new disabled=no dst-address-list=LINK1 in-interface=255.255.255.0 new-connection-mark=Sites1 passthrough=yes
/ ip firewall mangle add action=mark-routing chain=prerouting comment="" connection-mark=Sites1 disabled=no in-interface=255.255.255.0 new-routing-mark=Rota1 passthrough=no
/ ip route add gateway=10.10.10.1 routing-mark=Rota1


/ip firewall address-list add address=64.38.29.0/24 comment="RapidShare" disabled=no list=LINK0
/ip firewall address-list add address=208.69.32.0/24 comment="" disabled=no list=LINK0
/ip firewall address-list add address=208.67.217.0/24 comment="" disabled=no list=LINK0
/ip firewall address-list add address=201.7.178.0/24 comment="" disabled=no list=LINK0
/ip firewall address-list add address=201.7.176.0/24 comment="" disabled=no list=LINK0
/ip firewall address-list add address=64.38.29.0/24 comment="RapidShare" disabled=no list=LINK1
/ip firewall address-list add address=208.69.32.0/24 comment="" disabled=no list=LINK1
/ip firewall address-list add address=208.67.217.0/24 comment="" disabled=no list=LINK1
/ip firewall address-list add address=201.7.178.0/24 comment="" disabled=no list=LINK1
/ip firewall address-list add address=201.7.176.0/24 comment="" disabled=no list=LINK1
# Fim LoopBack por link----------------------


/ip firewall mangle add action=mark-connection connection-state=new chain=prerouting disabled=no in-interface=255.255.255.0 new-connection-mark=255.255.255.0_conn passthrough=yes
/ip firewall mangle add action=mark-connection connection-state=new chain=prerouting disabled=no in-interface=255.255.255.0 new-connection-mark=255.255.255.0_conn passthrough=yes
/ip firewall mangle add action=mark-routing chain=output connection-mark=255.255.255.0_conn disabled=no new-routing-mark=to_255.255.255.0 passthrough=yes
/ip firewall mangle add action=mark-routing chain=output connection-mark=255.255.255.0_conn disabled=no new-routing-mark=to_255.255.255.0 passthrough=yes
/ip firewall mangle add action=accept chain=prerouting disabled=no dst-address=10.1.1.0/24 in-interface=255.255.255.0
/ip firewall mangle add action=accept chain=prerouting disabled=no dst-address=10.10.10.0/24 in-interface=255.255.255.0
/ip firewall mangle add action=mark-connection connection-state=new chain=prerouting disabled=no dst-address-type=!local in-interface=255.255.255.0 new-connection-mark=255.255.255.0_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:3/0
/ip firewall mangle add action=mark-connection connection-state=new chain=prerouting disabled=no dst-address-type=!local in-interface=255.255.255.0 new-connection-mark=255.255.255.0_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:3/1
/ip firewall mangle add action=mark-connection connection-state=new chain=prerouting disabled=no dst-address-type=!local in-interface=255.255.255.0 new-connection-mark=255.255.255.0_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:3/2
/ip firewall mangle add action=mark-routing chain=prerouting connection-mark=255.255.255.0_conn disabled=no in-interface=255.255.255.0 new-routing-mark=to_255.255.255.0 passthrough=yes
/ip firewall mangle add action=mark-routing chain=prerouting connection-mark=255.255.255.0_conn disabled=no in-interface=255.255.255.0 new-routing-mark=to_255.255.255.0 passthrough=yes


# ip route----------------------------------
/ip route add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=10.1.1.1 routing-mark=to_255.255.255.0 comment="Link0"
/ip route add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=10.10.10.1 routing-mark=to_255.255.255.0 comment="Link1"
/ip route add check-gateway=ping comment="Link0" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=10.1.1.1 scope=30 target-scope=10
/ip route add check-gateway=ping comment="Link1" disabled=no distance=2 dst-address=0.0.0.0/0 gateway=10.10.10.1 scope=30 target-scope=10

[alyssonbmx]

essas regras ae amigo e com o modem rotiado

[ribeirogois]

Bom dia Pessoal, seria possível alguém do Fóruns me passar os vídeos do Geronimo explicando sobre load-balance. Fico no aguardo e desde já agradeço