Senhores, boa noite.
Preciso de uma ajuda para entender porque ao criar vlans na RB, a Vlan1 consegue pingar o gateway da Vlan2. Vejam a configuração do MT:
Ether1 Ether2 Ether3 Ether4 Ether5 Ether6 Ether7 Ether8 Ether9 Ether10 WAN1 WAN2 VLAN10 / VLAN11
Rede Vlan10: 172.25.10.0/24
Gateway: 172.25.10.1
DHCP: 172.25.10.100- 172.25.10.250
Voip Vlan11: 172.25.11.0/24
Gateway: 172.25.11.1
DHCP: 172.25.11.100- 172.25.11.250
A ether3 é uplink para um switch poe da Ubiquiti, configurado com a porta trunk para as duas vlans.
Agradeço desde já.