- MAC
+ Responder ao Tópico
-
placa
sis900
funcionar funciona.. no linux to tentando usar agora..
no windows eu uso ela tranquilo
-
MAC
eu tenho esta mesma placa aqui e funciona 100% no Conectiva .....
-
Subir
-
MAC
digita lsmod no console e coloca aqui o resultado .
-
lsmod
Module Size Used by Not tainted
soundcore 3396 0 (autoclean)
keybdev 2052 0 (unused)
mousedev 4212 1
hid 21220 0 (unused)
usbmouse 2040 0 (unused)
input 3200 0 [keybdev mousedev hid usbmouse]
usb-ohci 19240 0 (unused)
usbcore 59308 1 [hid usbmouse usb-ohci]
sis900 12396 0
crc32 2880 0 [sis900]
pcmcia_core 39972 0
ide-scsi 9328 0
agpgart 43940 0 (unused)
ta ae
-
-
Sim..
Eu sei.. mas ela num ta subida...
mas mesmo com o "down" da o mesmo erro..
-
lsmod
o lsmod deu isso
Module Size Used by Not tainted
soundcore 3396 0 (autoclean)
keybdev 2052 0 (unused)
mousedev 4212 1
hid 21220 0 (unused)
usbmouse 2040 0 (unused)
input 3200 0 [keybdev mousedev hid usbmouse]
usb-ohci 19240 0 (unused)
usbcore 59308 1 [hid usbmouse usb-ohci]
sis900 12396 0
crc32 2880 0 [sis900]
pcmcia_core 39972 0
ide-scsi 9328 0
agpgart 43940 0 (unused)
e agora?
-
MAC
que estranho esta sua placa pois o módulo esta carregado a placa aparentemente esta carregada corretamente, vc faz alguma mudança os módulos do sistema ou no arquivo /etc/modules.conf ??
-
nao
naum.. nenhuma... mas eu colokei umas linhas de comando no rc.local...
tipo akele pra mudar o MAC
e o UP pra subir.. só... precisa tirar?
-
MAC
não precisa não, cara não consigo imaginar o que pode ser o problema ... sei que eu uso tres linhas de comando e tudo funciona perfeitamente se erro algum .
-
q
quais linhas... tu num sabe oq pode estar acontecendo pra num subir?
-
MAC
ifconfig eth0 down
derruba o módulo: rmmod sis900
sobe o módulo: modprobe sis900
verifique o log do kernel: dmesg
observe se ha erros nas últimas linhas, relacionadas a placa
-
ae
tão aí as linhas de comando q vc pediu pra dar.. e as respectivas mensagens...
root@cable:~# ifconfig eth0 down
root@cable:~# rmmod sis900
root@cable:~# modprobe sis900
root@cable:~# dmesg
Linux version 2.4.26 (root@tree) (gcc version 3.3.4) #6 Mon Jun 14 19:07:27 PDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
zone(0): 4096 pages.
zone(1): 126972 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=303
Initializing CPU#0
Detected 2800.142 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5583.66 BogoMIPS
Memory: 515368k/524272k available (1844k kernel code, 8516k reserved, 618k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf10f0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1039/0963] at 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdcMA, hddio
hda: Maxtor 2F040L0, ATA DISK drive
blk: queue c03b3360, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST RW/DVD GCC-4521B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63, UDMA(133)
hdc: attached ide-cdrom driver.
hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 3211.200 MB/sec
32regs : 2106.400 MB/sec
pIII_sse : 3609.600 MB/sec
pII_mmx : 3300.800 MB/sec
p5_mmx : 3215.600 MB/sec
raid5: using function: pIII_sse (3609.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,3)) ...
for (ide0(3,3))
ide0(3,3):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 120k freed
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected SiS 648 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004
sis900.c: v1.08.06 9/24/2002
PCI: Enabling device 00:04.0 (0004 -> 0007)
PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try using pci=biosirq.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 0, 00:0e:a6:00:bb:c4.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Enabling device 00:03.2 (0004 -> 0006)
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe0d6e000, IRQ 5
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xe0d70000, IRQ 9
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Enabling device 00:02.7 (0004 -> 0005)
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
hub.c: new USB device 00:03.0-2, assigned address 2
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
usb.c: USB device 2 (vend/prod 0x4fc/0x5) is not claimed by any active driver.
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
PCI: No IRQ known for interrupt pin C of device 00:02.7. Please try using pci=biosirq.
ALSA intel8x0.c:2518: unable to grab IRQ 0
PCI: No IRQ known for interrupt pin D of device 00:03.2. Please try using pci=biosirq.
hcd.c: Found HC with no IRQ. Check BIOS/PCI 00:03.2 setup!
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 17:55:05 Jun 13 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver usbmouse
input0: USB Wheel Mouse on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
sis900.c: v1.08.06 9/24/2002
PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try using pci=biosirq.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 0, 00:0e:a6:00:bb:c4.
sis900.c: v1.08.06 9/24/2002
PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try using pci=biosirq.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 0, 00:0e:a6:00:bb:c4.
isso é tudo
-
MAC
Não tenho certeza se isto aqui abaixo seja própriamente um erro, mais eu tentaria resolver:
PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try using pci=biosirq.
Reboot a máquina e configure no setup que seu sistema operacional NÃO é plug and play. Se isto não resolver, informe a opção pci=biosirq para o boot do kernel.
-
VALEU!!
Agora ele recebeu o IP do DHCP do modem...
eu pinguei o modem e respondeu...
mas e agora? num ta navegando.. pq será?
valeu
onde eu faço pra ver o MAC atual?
-
MAC
ifconfig eth0
Campo: HWaddr
Se não for correto, experimente (padrão sysv)
/etc/init.d/network stop (desativa o ip da interface e o cliente dhcp)
ifconfig eth0 down (desativa a interface para o comando abaixo não acusar erro)
ifconfig eth0 hw ether mac_correto (configura a interface e ativa)
/etc/init.d/network start (start do cliente dhcp)
-
Alterou
vou tentar.. mas axo q o MAC ta alterado já pq se não não ia ter pegado o IP.. mas vou tentar.. e digo
-
MAC
realmente... ta alterado.. e correto..
root@cable:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:E0:06:09:23:45
inet addr:10.24.1.166 Bcast:255.255.255.255 Mask:255.255.0.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7557 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:463991 (453.1 Kb) TX bytes:944 (944.0 b)
Interrupt:3 Base address:0x9800
root@cable:~#
ele adquiriu o IP então ta certo...
mas.. agora.. pq não ta navegando será?
-
MAC
Vá até a página de autenticação do seu provedor de acesso...